1987 Jeep Catalytic Converter Parts

Choose a Model for your 1987 Jeep


Showing 1 - 10 of 15 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • 2.25in. Universal California Pre-OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Body Width: 6.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: California / Carb Compliant
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Substrate: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Comanche L - 6 Cyl 4.0L 242

Magnaflow
  • Universal Catalytic Converter - 2.5in.
  • CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.5in.
  • 2.50in. Universal California Pre-OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.5
    • Body Width: 6.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: California / Carb Compliant
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Substrate: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep J20 V - 8 Cyl 5.9L 360

Magnaflow
  • Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.50in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.5
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep J20 V - 8 Cyl 5.9L 360

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 21.75
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: Yes
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Clamp-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23229 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1986-1992 Jeep Cherokee, 1987-1992 Jeep Wrangler, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Wagoneer L - 4 Cyl 2.5L 150

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 2
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 26.75
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Clamp-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93470. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1984-1991 Jeep Grand Wagoneer, 1979-1988 Jeep J10, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep J20 V - 8 Cyl 5.9L 360

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Comanche L - 6 Cyl 4.0L 242

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 1
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: No
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 27.75
    • Body Type: Clam-shell
    • Inlet Mounting Hardware Included: Yes
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: Yes
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Clamp-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23225 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1987-1990 Jeep Wrangler. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Wrangler L - 6 Cyl 4.2L 258

Magnaflow
  • Direct-Fit Catalytic Converter
  • Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Bolt-on
    • Main Piping Diameter: 2.25
    • Outlet Attachment: Clamp-on
    • Sensor Port Count: 0
    • Heat Shield Material: Aluminized Steel
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Comanche L - 4 Cyl 2.5L 150

Magnaflow
  • Direct-Fit Catalytic Converter
  • Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Bolt-on
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep J20 V - 8 Cyl 5.9L 360

Magnaflow
  • Direct-Fit Catalytic Converter
  • Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Bolt-on
    • Main Piping Diameter: 2.5
    • Outlet Attachment: Clamp-on
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1987 - Jeep Wrangler L - 6 Cyl 4.2L 258
Showing 1 - 10 of 15 products

Loading...