1993 Lincoln Catalytic Converter Parts

Choose a Model for your 1993 Lincoln


Showing 1 - 10 of 19 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 30
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93385 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1992-1994 Ford Crown Victoria, 1991-1994 Lincoln Town Car, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Town Car V - Left 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Angled
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.25
    • Body Height: 3.5
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 11
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 2
    • Body Shape: Oval
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91042 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Mark VIII V - Rear 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Angled
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 5.25
    • Body Height: 3.5
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 11.25
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Angled
    • Inlet Quantity: 1
    • Body Shape: Oval
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 91084 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Mark VIII V - Front Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: No
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 29.5
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93384 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1992-1994 Ford Crown Victoria, 1991-1994 Lincoln Town Car, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Town Car V - Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 16
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Oval
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93505 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Town Car V - Left 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.25in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.25in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 16
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.25
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Oval
    • Outlet Inside Diameter: 2.25
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 93505 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Town Car V - Right 8 Cyl 4.6L 281

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4
    • Body Height: 4
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 9.75
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 54954. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Continental V - Right 6 Cyl 3.8L 232

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4
    • Body Height: 4
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 8.375
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 54974. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Continental V - Left 6 Cyl 3.8L 232

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4.75
    • Body Height: 4.375
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 12
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Outlet Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53104 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Mark VIII V - Front Left 8 Cyl 4.6L 281

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Weld-on
    • Inlet Orientation: Angled
    • Outlet Orientation: Angled
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Body Width: 5.25
    • Body Type: Clam Shell
    • Body Height: 3.5
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Lincoln Mark VIII V - Front Right 8 Cyl 4.6L 281
Showing 1 - 10 of 19 products

Loading...