1993 Mazda Catalytic Converter Parts

Choose a Model for your 1993 Mazda


Showing 1 - 10 of 43 products
Image
SKU
Product
Rating
Price

Magnaflow
  • Universal Catalytic Converter - 2.25in.
  • CARB Executive Order D-193-105; Certification Level : PRE-OBDII OE Spec Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.25in.
  • 2.25in. Universal California Pre-OBDII Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Inlet Diameter: 2.25
    • Body Width: 6.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: California / Carb Compliant
    • Inlet Attachment: Weld-on
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Substrate: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1993 - Mazda B2600 L 2606 4 Cyl 2.6L -

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Weld-on
    • Inlet Orientation: Straight
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Body Width: 4.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Engine CID
1993 - Mazda MX-3 V 1845 6 Cyl 1.8L -

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Weld-on
    • Inlet Orientation: Straight
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Body Width: 4.375
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 4.375
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Position Engine Fuel Delivery Type CID
1993 - Mazda B2200 L 2184 Rear 4 Cyl 2.2L CARB -

Magnaflow
  • Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required During Installation
  • Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Weld-on
    • Inlet Orientation: Straight
    • Outlet Orientation: Straight
    • Outlet Attachment: Weld-on
    • Sensor Port Count: 0
    • Body Width: 5.5
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Body Height: 3.75
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Mazda RX-7 R 1308 Rear 2 Cyl 1.3L -

Magnaflow
  • Direct-Fit Catalytic Converter
  • Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Bolt-on
    • Outlet Attachment: Bolt-on
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

Additional Fitment Information:
Vehicle Block CC Position Engine Fuel Delivery Type CID
1993 - Mazda B2200 L 2184 Rear 4 Cyl 2.2L CARB -

Magnaflow
  • Direct-Fit Catalytic Converter
  • Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Excludes CA)
  • Product Attributes:
    • Inlet Attachment: Bolt-on
    • Subtitle: Federal / Epa Compliant
    • Substrate Material: Ceramic

This Part Fits the Following OEM/Substitute Numbers:
JE48-20-600A, JE4820600A

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Mazda 929 V 2954 Rear 6 Cyl 3.0L 180

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 13.25
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23684. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1990-1993 Mazda Miata. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Engine CID
1993 - Mazda Miata L 1597 4 Cyl 1.6L -

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Magnaflow HM Grade Direct-Fit Catalytic Converter
  • Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: Yes
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 24.5
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23685 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1992-1994 Mazda Protege, 1991-1996 Ford Escort, and more, this direct-fit catalytic converter also interchanges with OE part F5CZ-5E212-AA. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

This Part Fits the Following OEM/Substitute Numbers:
F5CZ 5E212-AA, F5CZ-5E212-AA

Additional Fitment Information:
Vehicle Block CC Engine CID
1993 - Mazda Protege L 1839 4 Cyl 1.8L -

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 17
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23693 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1990-1993 Mazda B2200, 1991-1993 Mazda B2600, and more, this direct-fit catalytic converter also interchanges with OE parts KL01-20-600A and KL50-20-600, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

This Part Fits the Following OEM/Substitute Numbers:
F42Z 5E212-C, KL01-20-600, KL01-20-600A, KL0120600A, KL50-20-600, KL5020600

Additional Fitment Information:
Vehicle Block CC Engine CID
1993 - Mazda B2600 L 2606 4 Cyl 2.6L -

MagnaFlow Performance Exhaust
  • Standard Grade Direct-Fit Catalytic Converter
  • Magnaflow Standard Grade Direct-Fit Catalytic Converter
  • Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Overall Length: 22.25
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 0
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Outlet Type: Bolt-on
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23698 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed specifically for the 1992-1995 Mazda 929 and interchanges with OE parts JE48-20-600A and JE48-20-600. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

This Part Fits the Following OEM/Substitute Numbers:
JE48-20-600, JE48-20-600A, JE4820600A

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1993 - Mazda 929 V 2954 Rear 6 Cyl 3.0L 180
Showing 1 - 10 of 43 products

Loading...