1995 Subaru Catalytic Converter Parts

Choose a Model for your 1995 Subaru


Showing 1 - 10 of 12 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • OEM Grade Universal Catalytic Converter - 2.00in.
  • Standard Series ;2in. Tubing; 2in. In/Out; Overall L-13 in.; W-5.5in.; Conv L-9in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
  • 91000 Series Single Sensor OBDII Compliant Universal Cat Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Inlet Diameter: 2.000 In.
    • WARNING CA Proposition 65: No
    • Outlet Mounting Hardware Included: No
    • Body Width:
      • 5.5
      • 5.500 In.
    • Outlet Attachment Type: Weld-on
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Heat Shield Included: Yes
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Post Converter
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • CARB Executive Order Number: Not Applicable
    • Subtitles: Federal / Epa Compliant
    • Body Type:
      • Clam Shell
      • Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter:
      • 2
      • 2.000 In.
    • Outlet Outside Diameter: 2.000 In.
    • Substrate Material: Ceramic
    • Main Piping Diameter: 2.000 In.
    • Converter Body Size: Oem
    • Outlet Orientation: Straight
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Inlet Quantity: 1
    • Core Substrate Material: Ceramic
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 1
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 91034 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1995 - Subaru Impreza H 2212 Rear 4 Cyl 2.2L LX -

MagnaFlow Performance Exhaust
  • OEM Grade Universal Catalytic Converter - 2.00in.
  • Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L- 11.25 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
  • 94000 Series Non-OBDII Universal Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Angled
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Inlet Diameter: 2.000 In.
    • WARNING CA Proposition 65: No
    • Outlet Mounting Hardware Included: No
    • Body Width:
      • 5.25
      • 5.250 In.
    • Outlet Attachment Type: Weld-on
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: None
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • CARB Executive Order Number: Not Applicable
    • Subtitles: Federal / Epa Compliant
    • Body Type:
      • Clam Shell
      • Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter:
      • 2
      • 2.000 In.
    • Outlet Outside Diameter: 2.000 In.
    • Substrate Material: Ceramic
    • Main Piping Diameter: 2.000 In.
    • Converter Body Size: 5.250 In.
    • Outlet Orientation: Angled
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Inlet Quantity: 1
    • Core Substrate Material: Ceramic
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94084 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1995 - Subaru Impreza H 2212 Front 4 Cyl 2.2L LX -

MagnaFlow Performance Exhaust
  • OEM Grade Universal Catalytic Converter - 2.00in.
  • Standard Series; 2 in. Tubing/Inlet/Outlet; Overall L- 11.25 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
  • 94000 Series Non-OBDII Universal Catalytic Converter
  • Product Attributes:
    • Inlet Orientation: Angled
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Inlet Diameter: 2.000 In.
    • WARNING CA Proposition 65: No
    • Outlet Mounting Hardware Included: No
    • Body Width:
      • 5.25
      • 5.250 In.
    • Outlet Attachment Type: Weld-on
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: None
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • CARB Executive Order Number: Not Applicable
    • Subtitles: Federal / Epa Compliant
    • Body Type:
      • Clam Shell
      • Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter:
      • 2
      • 2.000 In.
    • Outlet Outside Diameter: 2.000 In.
    • Substrate Material: Ceramic
    • Main Piping Diameter: 2.000 In.
    • Converter Body Size: 5.250 In.
    • Outlet Orientation: Angled
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Inlet Quantity: 1
    • Core Substrate Material: Ceramic
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 94084 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1995 - Subaru Impreza H 2212 Front 4 Cyl 2.2L LX -

MagnaFlow Performance Exhaust
  • OEM Grade Universal Catalytic Converter - 2.00in.
  • Standard Series ;2in. Tubing; 2in. In/Out; Overall L-13 in.; W-5.5in.; Conv L-9in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Magnaflow OEM Grade Universal Catalytic Converter - 2.00in.
  • 91000 Series Single Sensor OBDII Compliant Universal Cat Converter
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Inlet Diameter: 2.000 In.
    • WARNING CA Proposition 65: No
    • Outlet Mounting Hardware Included: No
    • Body Width:
      • 5.5
      • 5.500 In.
    • Outlet Attachment Type: Weld-on
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Heat Shield Included: Yes
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Post Converter
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • CARB Executive Order Number: Not Applicable
    • Subtitles: Federal / Epa Compliant
    • Body Type:
      • Clam Shell
      • Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter:
      • 2
      • 2.000 In.
    • Outlet Outside Diameter: 2.000 In.
    • Substrate Material: Ceramic
    • Main Piping Diameter: 2.000 In.
    • Converter Body Size: Oem
    • Outlet Orientation: Straight
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Inlet Quantity: 1
    • Core Substrate Material: Ceramic
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 1
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 91034 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1995 - Subaru Impreza H 2212 Rear 4 Cyl 2.2L LX -

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.50in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.50in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 6.375
    • Body Height: 3.75
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 2
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.5
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94007 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Rear 6 Cyl 3.3L -

Magnaflow
  • HM Grade Universal Catalytic Converter - 2.00in.
  • Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
  • Magnaflow HM Grade Universal Catalytic Converter - 2.00in.
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 4.25
    • Body Height: 4.375
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Finish: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • Body Length: 11
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Oxygen Sensor Location: Post Converter
    • Series: Hm Grade
    • Heat Shield Attached: Yes
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2
    • Substrate Material: Ceramic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Prop 65 Y/N: No
    • Sensor Port Count: 1
    • Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99304hm
  • Features:
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Durable 308 stainless steel MIG welds
  • MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99304HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru Legacy H 2212 Rear 4 Cyl 2.2L -

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Magnaflow HM Grade Direct-Fit Catalytic Converter
  • Direct-Fit HM Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Oxygen Sensor Location: Pre And Post Converter
    • Outlet Gasket Included: Yes
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Clamps Included: No
    • Sensor Port Count: 3
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
  • Features:
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23875 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-1999 Subaru Legacy, 1993-1998 Subaru Impreza, and more, this direct-fit catalytic converter also interchanges with OE parts 44111AC340 and 44110FA061, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

This Part Fits the Following OEM/Substitute Numbers:
44110 FA062, 44110-FA061, 44110FA061, 44111 AC160, 44111 AC162, 44111 AC340, 44111-AC160, 44111-AC162, 44111-AC233, 44111-AC340, 44111AC160, 44111AC161, 44111AC162, 44111AC230, 44111AC231, 44111AC232, 44111AC233, 44111AC340...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru Legacy H 2212 Front 4 Cyl 2.2L -

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Left 6 Cyl 3.3L -

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter - 2.00in.
  • Cutting and Welding Required
  • Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
  • Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
  • Product Attributes:
    • Inlet Orientation: Straight
    • Air Tube Count: 0
    • Tube Material: Stainless Steel
    • Outlet Gasket Included: No
    • Outlet Mounting Hardware Included: No
    • Body Width: 3
    • Body Height: 3
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Clamps Included: No
    • Outlet Quantity: 1
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB) Certified: No
    • Inlet Gasket Included: No
    • Heat Shield Attached: No
    • Hangers Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Spun
    • Inlet Inside Diameter: 2
    • Substrate Material: Metallic
    • Outlet Orientation: Straight
    • Inlet Quantity: 1
    • Body Shape: Round
    • Outlet Inside Diameter: 2
    • Sensor Port Count: 0
  • Features:
    • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
    • Compact, lightweight construction enables installation in confined areas, welding is required
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Durable 308 stainless steel MIG welds
  • Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 50004. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru SVX H 3318 Front Right 6 Cyl 3.3L -

Magnaflow
  • HM Grade Direct-Fit Catalytic Converter
  • Not legal for sale or installation in California, Colorado or New York.
  • Magnaflow HM Grade Direct-Fit Catalytic Converter
  • Product Attributes:
    • Air Tube Count: 0
    • Inlet Gasket Included: Yes
    • Tube Material: Stainless Steel
    • Oxygen Sensor Location: Pre And Post Converter
    • Outlet Gasket Included: Yes
    • Series: Hm Grade
    • Grade Type: Regular
    • Hangers Included: No
    • Heat Shield Attached: Yes
    • Outlet Mounting Hardware Included: No
    • CARB Executive Order Number: Not Applicable
    • Body Type: Clam-shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Mounting Hardware Included: No
    • Body Material: Stainless Steel
    • Substrate Material: Ceramic
    • Finish: Stainless Steel
    • Clamps Included: No
    • Prop 65 Y/N: No
    • Sensor Port Count: 3
    • Air Tube Adaptable: No
    • Title: Magnaflow Hm Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23875
    • California Air Resources Board (CARB) Certified: No
  • Features:
    • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
    • Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
    • High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
    • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
    • Simplifies installation with essential gaskets and hardware being included in the box
    • Durable 308 stainless steel MIG welds
  • MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23875 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1995-1999 Subaru Legacy, 1993-1998 Subaru Impreza, and more, this direct-fit catalytic converter also interchanges with OE parts 44111AC340 and 44110FA061, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

This Part Fits the Following OEM/Substitute Numbers:
44110 FA062, 44110-FA061, 44110FA061, 44111 AC160, 44111 AC162, 44111 AC340, 44111-AC160, 44111-AC162, 44111-AC233, 44111-AC340, 44111AC160, 44111AC162, 44111AC233, 44111AC340, 44139 AE10A, 44139 AE11A, 44139 AE12A, 44139 FA010...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1995 - Subaru Impreza H 1781 Front 4 Cyl 1.8L -
Showing 1 - 10 of 12 products

Loading...