Image
Product
Price
- California Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number (EFN) HGMXJ02.4199 Engine Family Number (EFN) HGMXT02.4151 Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Outlet Mounting Hardware Included: Yes
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: Yes
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 5.625
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: Yes
- Oxygen Sensor Location: Pre And Post Converter
- Series: California
- Heat Shield Attached: No
- Hangers Included: Yes
- CARB Executive Order Number: D-193-148
- Body Type: Spun
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Title: Magnaflow California Grade Carb Compliant Direct-fit Catalytic Converter 5582941
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5582941. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2010-2017 Chevrolet Equinox, 2010-2017 GMC Terrain, and more, this direct-fit catalytic converter also interchanges with OE part 25970315. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
This Part Fits the Following OEM/Substitute Numbers:
25970315
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Chevrolet Equinox | L | 2384 | Front | 4 Cyl 2.4L | 145 |
- Pre-Converter - Not CARB Compliant
- CARB Compliant: No CARB Executive Order Number: Not Carb Compliant
- Product Attributes:
- Air Tube Count: 0
- Forma del puerto de entrada del múltiple de escape: Rectángulo
- Outlet Gasket Included:
- No
- Non
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Tube Wall Thickness:
- 0.125 In
- 0.125 In.
- Outlet Mounting Hardware Included:
- Oui
- Sí
- Yes
- Body Width: 3
- Inlet Port Shape:
- Redondo
- Round
- Inlet Mounting Hardware Included:
- No
- Non
- Body Material:
- Acero Inoxidable
- Stainless Steel
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Gris Metálico
- Metallic Gray
- Converter Body Length: 9 In
- Type:
- One-piece
- Una Sola Pieza
- Material:
- Acero Inoxidable
- Stainless Steel
- California Air Resources Board (CARB) Certified:
- No
- Non
- Outlet Mounting Hole Quantity: 2
- Inlet Gasket Included:
- Oui
- Sí
- Yes
- Exhaust Manifold Inlet Port Shape: Rectangle
- Heat Shield Attached:
- Oui
- Sí
- Yes
- New York Certified:
- No
- Non
- CARB Executive Order Number: Not Carb Compliant
- California Air Resources Board Approved:
- No
- Non
- Inlet Inside Diameter: 2.6
- Installation Hardware Included:
- Oui
- Sí
- Yes
- Outlet Outside Diameter: 3.3
- Substrate Material:
- Ceramic
- Cerámico
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Inlet Mounting Hole Quantity: 0
- Cumplimiento de CARB: No
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Body Shape:
- Cilíndrico
- Cylindrical
- Outlet Inside Diameter: 3.2
- Sensor Port Count:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete:
- 1 Junta De Salida
- 1 Tornillo
- Outlet Port Shape:
- Redondo
- Round
- Aprobado por la Junta de Recursos del Aire de California: No
- Número de orden ejecutiva CARB: No Cumple Con Las Normas Carb
- CARB Compliant:
- No
- Non
-
Features:
- Direct replacement - this catalytic converter is designed to match the fit and performance of the original equipment on specific vehicles
- Durable construction - manufactured within strict tolerances for reliable longevity
- Cost-effective solution - offers original equipment functionality at a competitive price
- Trustworthy value - backed by team of engineers and quality control experts in the United States
- This catalytic converter is precision-engineered to match the original equipment fit and function on specific vehicle years, makes and models for a reliable replacement.
This Part Fits the Following OEM/Substitute Numbers:
21-427, 30640, G1FZ5E212D
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Ford Focus | L | 2300 | 4 Cyl 2.3L | 140 |
- Pre-Converter - Not CARB Compliant
- CARB Compliant: No
- Product Attributes:
- Air Tube Count:
- 1
- 1 Ensamble De Manguera Del Calentador
- Forma del puerto de entrada del múltiple de escape: Redondo
- Outlet Gasket Included:
- No
- Non
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Outlet Mounting Hardware Included:
- No
- Non
- Inlet Mounting Hardware Included:
- No
- Non
- Body Material:
- Acero Inoxidable
- Stainless Steel
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Gris Metálico
- Metallic Gray
- Body Length: 14
- Material:
- Acero Inoxidable
- Stainless Steel
- California Air Resources Board (CARB) Certified:
- No
- Non
- Outlet Mounting Hole Quantity: 3
- Inlet Gasket Included:
- No
- Non
- Exhaust Manifold Inlet Port Shape: Round
- Heat Shield Attached:
- Oui
- Sí
- Yes
- California Air Resources Board Approved:
- No
- Non
- Inlet Inside Diameter: 1.5
- Installation Hardware Included:
- Oui
- Sí
- Yes
- Outlet Outside Diameter: 3
- Substrate Material:
- Carburo De Silicio
- Silicon Carbide
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Inlet Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Cumplimiento de CARB: No
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Body Shape: Tubular
- Outlet Inside Diameter: 2.5
- Sensor Port Count:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Convertidor, 6 Tornillos, 6 Arandelas, 8 Tuercas, 2 Juntas
- Aprobado por la Junta de Recursos del Aire de California: No
- CARB Compliant:
- No
- Non
- Air Tube Count:
-
Features:
- Direct replacement - this catalytic converter is designed to match the fit and performance of the original equipment on specific vehicles
- Durable construction - manufactured within strict tolerances for reliable longevity
- Cost-effective solution - offers original equipment functionality at a competitive price
- Trustworthy value - backed by team of engineers and quality control experts in the United States
- This catalytic converter is precision-engineered to match the original equipment fit and function on specific vehicle years, makes and models for a reliable replacement.
This Part Fits the Following OEM/Substitute Numbers:
102619391610810703, 13265369, 16659, 16953, 19420225, 25196720, 280173, 50509, 52092, 534007, 55578984, 644075
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Chevrolet Sonic | L | 1364 | Front | 4 Cyl 1.4L | 83 |
- HM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Toyota 4Runner | V | 3956 | Right | 6 Cyl 4.0L | 241 |
- HM Grade Universal Catalytic Converter - 2.25in.
- Super Ultra Low Emission Vehicle (SULEV) Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Kia Sportage | L | 2359 | 4 Cyl 2.4L | - |
- HM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Land Rover Range Rover Sport | V | 2993 | Rear Right | 6 Cyl 3.0L | 183 |
- HM Grade Universal Catalytic Converter - 2.50in.
- Cutting and Welding Required Not legal for sale or installation in California, Colorado or New York.
- Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Land Rover Range Rover | V | 2993 | Rear Left | 6 Cyl 3.0L | 183 |
- HM Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Toyota Sequoia | V | 5663 | Right | 8 Cyl 5.7L | 345 |
- HM Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99206hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99206HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2017 - Nissan Altima | L | 2488 | 4 Cyl 2.5L | 152 |
- Pre-Converter - Not CARB Compliant
- CARB Compliant: No
- Product Attributes:
- Air Tube Count: 0
- Forma del puerto de entrada del múltiple de escape: Redondo
- Outlet Gasket Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Outlet Mounting Hardware Included:
- No
- Non
- Body Width: 4.5
- Inlet Mounting Hardware Included:
- Oui
- Sí
- Yes
- Body Material:
- Acero Inoxidable
- Stainless Steel
- Outlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Gris Metálico
- Metallic Gray
- Body Length: 4
- Material:
- Acero Inoxidable
- Stainless Steel
- California Air Resources Board (CARB) Certified:
- No
- Non
- Inlet Gasket Included:
- Oui
- Sí
- Yes
- Exhaust Manifold Inlet Port Shape: Round
- Heat Shield Attached:
- No
- Non
- California Air Resources Board Approved:
- No
- Non
- Inlet Inside Diameter: 3
- Installation Hardware Included:
- Oui
- Sí
- Yes
- Outlet Outside Diameter: 4.8
- Substrate Material:
- Carburo De Silicio
- Silicon Carbide
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Inlet Mounting Hole Quantity: 4
- Cumplimiento de CARB: No
- Inlet Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Body Shape:
- Cilindro
- Cylinder
- Outlet Inside Diameter: 1.97
- Sensor Port Count:
- 1
- 1 Ensamble De Manguera Del Calentador
- Contenidos del paquete: 1 Ensamble Convertidor, 1 Junta De Entrada, 1 Junta De Salida, 4 Tornillos, 4 Arandelas
- Aprobado por la Junta de Recursos del Aire de California: No
- CARB Compliant:
- No
- Non
-
Features:
- Direct replacement - this catalytic converter is designed to match the fit and performance of the original equipment on specific vehicles
- Durable construction - manufactured within strict tolerances for reliable longevity
- Cost-effective solution - offers original equipment functionality at a competitive price
- Trustworthy value - backed by team of engineers and quality control experts in the United States
- This catalytic converter is precision-engineered to match the original equipment fit and function on specific vehicle years, makes and models for a reliable replacement.
This Part Fits the Following OEM/Substitute Numbers:
126007, 16700, 17204, 208A23JG0A, 208A23KD0A, 208A25AG0A, 208A29HP0A, 208A29NF0A, 208A29NT0A, 208A29PF0A, 208A2JA10A, 208A2ZN60A, 40886, 52163, 641532, B08A21AA0C, B08A21AE0B, B08A21JK0A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Nissan Murano | V | 3498 | Rear | 6 Cyl 3.5L | - |
Showing 1 - 10 of 237 products
Loading...