2007 Disc Brake Caliper Parts
Image
Product
Price
- Brake Caliper;
- Brake Caliper
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Brake Caliper
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2007 - Jeep Grand Cherokee | Front Right | Limited |
- AS CALIPER W/O BRKT
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2007 - Subaru Impreza | Front Right | EJ257 | WRX STI Limited | Turbocharged |
- AS CALIPER W/O BRKT
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2007 - Subaru Impreza | Front Left | EJ257 | WRX STI | Turbocharged |
- AS CALIPER W/O BRKT
- Gold Caliper
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2007 - Subaru Impreza | Front Left | EJ257 | WRX STI | Turbocharged |
- AS CALIPER W/O BRKT
- Gold Caliper
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2007 - Subaru Impreza | Front Right | EJ257 | WRX STI | Turbocharged |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 14.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 2.000
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 2.122
- 53.900
This Part Fits the Following OEM/Substitute Numbers:
11-23183-1, 14-3306, 141.65076, 142.65076, 18-B4975, 18-P4975, 331-54225, 99-17954B, NBRC3RM
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford F-150 | Front Left |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket; Coated
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 16.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 2.000
- Bleeder Screw Thread: 3/8"-24
- Surface Finish: Coated
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 2.358
- 59.900
This Part Fits the Following OEM/Substitute Numbers:
14-3309, 141.65073, 142.65073, 15-13309, 1513309, 18-B5022, 18-P5022, 331-54222, 99-17936A, 9917936A, CRB140120, SC1390
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford F-250 Super Duty | Front Right |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 16.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 2.000
- Bleeder Screw Thread: 3/8"-24
- Surface Finish: Plain
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 2.358
- 59.900
This Part Fits the Following OEM/Substitute Numbers:
14-3308, 141.65074, 142.65074, 15-13308, 1513308, 18-B5023, 18-P5023, 331-54223, 99-17936B, 9917936B, CRB140121, SC1389
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford F-250 Super Duty | Front Left |
- R-Line; Friction-Ready Caliper, Remanufactured
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Manufacturing Type: Remanufactured
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 2.008
- 51.000
This Part Fits the Following OEM/Substitute Numbers:
10-3265S, 10-8512, 11-13120-1, 11-8512, 14-3265, 141.65517, 142.65517, 15-13265, 15-13294, 1513265, 1513294, 16-4858, 18-4858, 18-4858XR, 18-P4858, 331-54690, 4L3Z2552AB, 6685...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford F-150 | Rear Right |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 14.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 2.000
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 2.122
- 53.900
This Part Fits the Following OEM/Substitute Numbers:
11-23184-1, 14-3307, 141.65075, 142.65075, 18-B4974, 18-P4974, 331-54224, 99-17954A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2007 - Ford F-150 | Front Right |
Showing 1 - 10 of 689 products
Loading...