Image
Product
Price
- AS CALIPER W/O BRKT
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2010 - Subaru Impreza | Front Right | EJ257 | WRX STI Special Edition | Turbocharged |
- AS CALIPER W/O BRKT
- DIRECT REPLACEMENT CALIPER
- Autospecialty By Power Stop Remanufactured Calipers
- Product Attributes:
- Piston Diameter: 40.00mm
- Anti-Rattle Spring Included: Yes
- Grade Type: Regular
- Mounting Hardware Included: No
- WARNING CA Proposition 65: Yes
- Bleeder Screw Included: Yes
- Bleeder Screw Thread Diameter: 10mm
- Caliper Piston Material: Aluminum
- Brake Pads Included: No
- Caliper Slides Included: No
- Bleeder Screw Thread Pitch: 1mm
- Caliper Color: Gray
- Inlet Thread Size: M10 X 1.0
- Inlet Thread Diameter: 10.00mm
- Mounting Bolt Included: No
- WARNING CA Proposition 65 Message:
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
- Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
- Caliper Piston Quantity: 4
- Mounting Bracket Included: No
- Caliper Casting Material: Aluminum
- Abutment Clips Included: No
- Bleeder Screw Thread Size: M10 X 1.0
- Inlet Thread Pitch: 1.00mm
- Caliper Type: Fixed
- Inlet Fitting Type: Banjo
- Pad Wear Sensor Included: No
-
Features:
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Includes Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
- Autospecialty Calipers by PowerStop (Sold Individually) bolt directly in place of the stock calipers. Autospecialty brake calipers and the brackets are remanufactured in our Chicago, IL facility. Autospecialty calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This ensures that every caliper is inspected for quality and safety. These calipers are expertly assembled using new seals, pad retainer pins and pin clips, dust boots, bleeder screws and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Autospecialty by PowerStop Stock Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
Additional Fitment Information:
| Vehicle | Position | Engine Designation | Sub Model | Aspiration |
|---|---|---|---|---|
| 2010 - Subaru Impreza | Front Left | EJ257 | WRX STI Special Edition | Turbocharged |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 12.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 1.250
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 1.681
- 42.700
This Part Fits the Following OEM/Substitute Numbers:
14-8569, 141.47037, 19-B2682B, 19-P2682B, 331-13036, 99-01323A, 9901323A, SC0850-1
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Legacy | Front Right | 2.5i |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Caliper Bracket Mounting Hole Size: 12.000
- Manufacturing Type: Remanufactured
- Caliper Bracket Mounting Hole Thread Pitch: 1.250
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Piston Quantity: 2
- Caliper Type: Floating
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
- Caliper Piston Diameter:
- 1.681
- 42.700
This Part Fits the Following OEM/Substitute Numbers:
14-8568, 141.47038, 19-B2683B, 19-P2683B, 331-13037, 99-01323B, 9901323B, SC0849-1
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Legacy | Front Left | 2.5i Limited |
- Cardone/OEF3 Reman
- Friction Ready - with Installation Hardware w/o Bracket
- Unloaded w/o Bracket
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Legacy | Rear Left | 2.5i Limited |
- Cardone/OEF3 Reman
- Friction Ready - with Installation Hardware w/o Bracket
- Unloaded w/o Bracket
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Outback | Rear Right | 2.5i |
- Cardone/OEF3 Reman
- Friction Ready - with Installation Hardware w/o Bracket
- Unloaded w/o Bracket
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Outback | Front Left | 2.5i Premium |
- Cardone/OEF3 Reman
- Friction Ready - with Installation Hardware w/o Bracket
- Unloaded w/o Bracket
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Impreza | Front Right | Outback Sport |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Manufacturing Type: Remanufactured
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
This Part Fits the Following OEM/Substitute Numbers:
10-08606-1, 10-18617, 10-8617S, 141.47529, 19-6379, 19-B3424, 19-P3424, 19B3424, 331-13628, 99-01338A, 9901338A, SC1876
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Impreza | Rear Right | WRX |
- R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Manufacturing Type: Remanufactured
- Bleeder Screw Thread: M10x1
- Surface Finish: Plain
- Caliper Casting Material: Cast Iron
- Caliper Configuration: Semi-loaded
This Part Fits the Following OEM/Substitute Numbers:
10-08605-1, 10-18616, 10-8616S, 141.4753, 141.47530, 19-6378, 19-B3425, 19-P3425, 19B3425, 331-13629, 99-01338B, 9901338B, SC1875
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2010 - Subaru Impreza | Rear Left | Outback Sport |
Showing 1 - 10 of 10 products
Loading...