Image
Product
Price
- HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;O.E.M. Replacement Part
- Performance Distributor; HEI; High Dielectric Strength Cap w/Brass Male Towers; Direct Plug And Play; Includes OE Style Ignition Module; Cast Aluminum; Polished;
- Performance Distributor
- Product Attributes:
- Distributor Type: Hei/breakerless
- WARNING CA Proposition 65: No
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (265-350)
-
Features:
- Distributor Cap w/Brass Terminals
- All New Cast Aluminum Housings For Durability
- OEM Style Ignition Modules For Trouble-Free Service
- High-Quality Distributor Gears
- Long Sintered Bushings For Long Life
- ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesnt break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chevrolet Impala | V | 4638 | 8 Cyl 4.6L | 283 |
- Dist Billet Chevy SB/BB blk cap
- CARB Executive Order D-57-23; Black Female Cap; Includes Cap And Rotor; Machine Polished Finish; Standard Deck Height Engine; Vacuum Advance Distributor: SB/BB
- FLAME-THROWER BILLET DISTRIBUTOR WITH IGNITOR II ELECTRONICS FOR CHEVY SB/BB ENGINES. VACUUM ADVANCE WITH BLACK FEMALE STYLE CAP.
- Product Attributes:
- Emission Description: This Product Has Been Granted A California Air Resources Board (carb) "e.o" (executive Order) Exemption, Or Is Considered A Direct Replacement Or Consolidated Replacement Part. It Is 50 State Legal When Installed On The Appropriate Vehicle Per The Manufac
- Prop 65 - Short Label: Warning.jpg
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Chevrolet Impala | V | 6704 | 8 Cyl 6.7L | Base | 409 |
- Dist Billet I3 Mopar 426-440 black cap
- CARB Executive Order D-57-23; Not for use with solid core spark plug wires; Black Male Cap; Vacuum Advance; 426-440
- FLAME-THROWER BILLET DISTRIBUTOR WITH IGNITOR III ELECTRONICS FOR MOPAR 413-400 INCLUDING 426 HEMI ENGINES. VACUUM ADVANCE WITH BLACK FEMALE STYLE CAP.
- Product Attributes:
- Emission Description: This Product Has Been Granted A California Air Resources Board (carb) "e.o" (executive Order) Exemption, Or Is Considered A Direct Replacement Or Consolidated Replacement Part. It Is 50 State Legal When Installed On The Appropriate Vehicle Per The Manufac
- Prop 65 - Short Label: Warning.jpg
- Prop 65 (C, R or CR): Cr
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Chrysler 300 | V | 6769 | 8 Cyl 6.7L | Base | 413 |
- Not Legal For Use Or Sale On Pollution Controlled Vehicles
- Distributor;
- Distributor
- Product Attributes:
- Distributor Type: Oem
- WARNING CA Proposition 65: No
- Engine Make/Size: Willey/jeep 134
-
Features:
- Distributor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Jeep CJ6 | L | 2197 | 4 Cyl 2.2L | 134 |
- HEI Distributor; Street/Strip; Built-In Coil; Red Cap; Fits Buick V8 Engines
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Red
- HEI Distributor; Fits Buick V8 215-350 Engines; Built-In Coil With Magnetic Trigger; Comes With A Red Cap and Features A Vacuum and Mechanical Advance; Comes With An Iron Gear; Made From Cast Aluminum With Natural Finish
- Product Attributes:
- Mechanical Advance: 22 Degrees
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Ignition Coil Included: Yes
- Category: Hei Distributor - V8
- Feature/Benefit: These Units Offer Calibrated Advance Curves That Are Optimized For Maximum Combustion Efficiency And For The Elimination Of Detonation Damage And Throttle Ping.
- Applications: Buick 215 To 350 Engines
- Cap Color: Red
- Make: Buick
- Vacuum Advance: Adjustable
- These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric red cap with brass terminals, and a low-saturation ignition module.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Buick Special | V | 3528 | 8 Cyl 3.5L | 215 |
- HEI Distributor; Street/Strip; Built-In Coil; Blue Cap; Fits Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- HEI Distributor; Street/Strip Version; Built-In Coil With Magnetic Trigger; Features Blue Cap; Fits Ford 289-302 5.0 Engines; Comes With An Iron Gear and With Not Work With Factory Roller Cams; Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Make: Ford
- Cap Color: Blue
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Distributors
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford Galaxie 500 | V | - | 8 Cyl 4.7L | 289 |
- HEI Distributor; Street/Strip; Built-In Coil; Black Cap; For Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil; Black Cap; Housing Finish:Natural
- HEI Distributor; Street/Strip Version; Built-In Coil With Magnetic Trigger; Features Black Cap; Fits Ford 289-302 5.0 Engines; Comes With An Iron Gear and With Not Work With Factory Roller Cams; Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Make: Ford
- Cap Color: Black
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Ford Hei Distributor
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Ford Fairlane | V | - | 8 Cyl 4.7L | 289 |
- HEI Distributor; Racing Type w/Vac-Adv; Red Cap; Polished; For Chevy V8 Engines
- HEI Distributor; Racing Type w/Vac-Adv;Housing Finish:Polished; Cap Color:Red
- HEI Distributor; Racing Model; Chevy V8 Engines; Built-In Coil With Magnetic Trigger; Comes With A Red Cap w/Coil and Features A Vacuum and Mechanical Advance; Comes With A Cast Iron Gear; Die Cast Aluminum With Polished Finish; 100% New
- Product Attributes:
- Rotation: Standard
- Housing Finish: Polished
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Designed To Meet The High Performance Demands Of Racing Competition, These Units Fit Chevy Small Block And Big Block Engines.
- Make: Chevrolet
- Cap Color: Red
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Distributors
- Applications: Chevy V8 Engines
- Vacuum Advance: 13 Degrees
- Designed to meet the high performance demands of racing competition, these units fit Chevy small block and big block engines. These 100% NEW distributors have all the reliable components of the 66940, but they also include a highpower 50,000 volt coil. This high-performance distributor produces a 50,000 volt spark through 7,500 RPM with true spark alignment for instantaneous response, a high performance curve, a premium cap with brass terminals, and a low-saturation ignition module. All have die-cast aluminum housings, polished to a brilliant billet-look appearance, except as noted.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chevrolet C30 Pickup | V | 4638 | 8 Cyl 4.6L | 283 |
- HEI Distributor; Fits Pontiac 326-455 V8 Engines; Red Cap; Natural Finish
- HEI Distributor; Red Cap;Housing Finish:Natural
- HEI Distributor; Fits Pontiac 326-455 V8 Engines; Built-In Coil With Magnetic Trigger; Comes With A Red Cap and Features A Vacuum and Mechanical Advance; Comes With An Iron Gear; Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Number of Cylinders: 8
- Feature/Benefit: Fits Pontiac Small Block And Big Block Engines.
- Make: Pontiac
- Cap Color: Red
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Category: Hei Distributor-red
- Applications: Pontiac 265 To 455 Engines
- Vacuum Advance: Adjustable
- Fits Pontiac small block and big block engines. Supplied with 50,000 volt coil and rotor
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Pontiac LeMans | V | 5343 | 8 Cyl 5.3L | 326 |
- Includes Cap/Rotor/Vacuum Advance; Iron Gear;CARB E.O. D-40-39 CARB E.O. D-40-38~If Replacing A GM HEI- A Blaster SS Coil & Coil Wire Are Required
- Ready-To-Run Distributor; Includes Cap/Rotor/Vacuum Advance; Iron Gear;
- Ready-To-Run Distributor
- Product Attributes:
- Distributor Type: Ready To Run
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Engine Make/Size:
- Chevy Big Block (396-454)
- Chevy Small Block (262-400)
-
Features:
- Simple and clean three wire installation
- Supplied w/An HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- Does not require an MSD Ignition Control
- CARB E.O. Approved
- Now includes built-in Rev Limiter
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Built-in module produces a 7.5 amp single spark through high rpm
- Easy-To-Adjust Mech. Advance w/Supplied Springs/Stop Bushings
- Vacuum advance canister for improved economy (can be locked out)
- The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires, the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger an aftermarket EFI such as an Atomic EFI system.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1963 - Chevrolet Bel Air | V | 5358 | 8 Cyl 5.3L | 327 |
Showing 1 - 10 of 24 products
Loading...