1969 Electric Fuel Pump Parts
Choose a Make for your 1969 vehicle
AM General
American Motors
Aston Martin
Audi
Austin
Austin Healey
BMW
Bentley
Buick
Cadillac
Chevrolet
Chrysler
Citroen
Dodge
Ferrari
Fiat
Ford
GMC
Honda
Jaguar
Jeep
Jensen
Lamborghini
Lancia
Land Rover
Lincoln
Lotus
MG
Maserati
Mazda
Mercedes-Benz
Mercury
Nissan
Oldsmobile
Opel
Peugeot
Plymouth
Pontiac
Porsche
Renault
Saab
Subaru
Toyota
Volkswagen
Volvo
Image
Product
Price
- Fuel Pump - Electric In Line
- Universal Electric Pump Replaces Mechanical Pump; For safety reasons, it is recommended that an A68301 Safety Switch be installed with this replacement pump. This will prevent engine damage, and reduce the chance of fire should the engine stops running without the ignition switch being in the off position.
- Product Attributes:
- Voltage: 12v
- Minimum Flow Rating: 26.4
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Fuel Type:
- Diesel
- Gas
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 112
- Pump Design: Gerotor
- Outlet Outside Diameter: 3/8
- Inlet Fitting Thread Size: 1/8-27 Npt
- Mounting Bracket Included: Yes
- Minimum Pressure: 2.3
- Seal And Lock Ring Included: No
- Wiring Harness Included: No
- Terminal Type: Lead Wire
- Inlet Outside Diameter: 3/8
- Regulator Included: No
- Strainer Included: No
- Wire Quantity: 2
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
1234666, 151-1090, 151-1091, 16700-634-005, 16700-634-015, 16700-634-315, 16700-634-672, 16700-634-673, 19162977, 2126 087, 2421 110, 3621 674, 3700900, 3700901, 599-1011, 602-1249, 6472381, 69404...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - American Motors Ambassador | V | - | In-Line | 8 Cyl 4.8L | 290 |
- Fuel Pump - Electric In Line
- with Vacuum Wipers; For safety reasons, it is recommended that an A68301 Safety Switch be installed with this replacement pump. This will prevent engine damage, and reduce the chance of fire should the engine stops running without the ignition switch being in the off position.
- Product Attributes:
- Voltage: 12v
- Minimum Flow Rating: 26.4
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Fuel Type:
- Diesel
- Gas
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 112
- Pump Design: Gerotor
- Outlet Outside Diameter: 3/8
- Inlet Fitting Thread Size: 1/8-27 Npt
- Mounting Bracket Included: Yes
- Minimum Pressure: 2.3
- Seal And Lock Ring Included: No
- Wiring Harness Included: No
- Terminal Type: Lead Wire
- Inlet Outside Diameter: 3/8
- Regulator Included: No
- Strainer Included: No
- Wire Quantity: 2
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1969 - American Motors Rebel | V | - | In-Line | 8 Cyl 6.4L | 390 |
- Fuel Pump - Electric In Line
- ; May Be Used As Mechanical Fuel Pump Replacement
- Product Attributes:
- Voltage: 12v
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Fuel Type:
- Diesel
- Gas
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 141.0
- Pump Design: Rotary Vane
- Connector Shape: N/a
- Outlet Outside Diameter: 12.0
- Terminal Quantity: 2
- Mounting Bracket Included: Yes
- Seal And Lock Ring Included: No
- Wiring Harness Included: No
- Terminal Type: Pin
- Terminal Gender: Male
- Inlet Outside Diameter: 12.0
- Regulator Included: No
- Outlet Fitting Thread Size: 3/8 - 18 Npsf
- Strainer Included: No
- Wire Quantity: 2
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Ford Mustang | V | 7030 | 8 Cyl 7.0L | 429 |
- Fuel Pump - Electric In Line
- ; Quadra Jet Carb., 390 H.P., May Be Used As Mechanical Fuel Pump Replacement
- Product Attributes:
- Voltage: 12v
- Negative Ground: Yes
- Mounting Hardware Included: Yes
- Fuel Type:
- Diesel
- Gas
- Pump Type: Electric
- Fuel Sending Unit Included: No
- Length: 141.0
- Pump Design: Rotary Vane
- Connector Shape: N/a
- Outlet Outside Diameter: 12.0
- Terminal Quantity: 2
- Mounting Bracket Included: Yes
- Seal And Lock Ring Included: No
- Wiring Harness Included: No
- Terminal Type: Pin
- Terminal Gender: Male
- Inlet Outside Diameter: 12.0
- Regulator Included: No
- Outlet Fitting Thread Size: 3/8 - 18 Npsf
- Strainer Included: No
- Wire Quantity: 2
- The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
This Part Fits the Following OEM/Substitute Numbers:
B0238E, E16470, E3542556, E84600, EFP362, SP8117
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Chevrolet Corvette | V | 6998 | 8 Cyl 7.0L | 427 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - BMW 2000ti |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Buick GS 400 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - American Motors AMX |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Citroen D21 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1969 - Porsche 911 | T |
- May Be Used As Mechanical Fuel Pump Replacement
- Engineered and manufactured in a highly automated and dust-free environment, all Agility fuel system products meet or exceed all OEM specifications. Premium quality is ensured through stringent performance and reliability testing. Our enhanced packaging, which includes double wall corrugation and airbag protection, ensures our product is well protected to endure the rigors of modern shipping. All Agility fuel system components are drop-in replacements right out of the box with all the necessary components included
- Agility
-
Features:
- Carbon Commutators are used to ensure a long product life expectancy
- Precision tested fuel level sensor ensures vehicle's fuel gauge will always provide an accurate reading at any fuel level
- Includes fuel strainer for smoother installation process and ensures a clean fuel system upon replacement, 100% leak, flowrate and pressure tested
- Improved connectors to eliminate excessive electrical resistance and provide better heat dissipation compared to OE
- Fuel level sensor utilizes palladium silver alloy for increase durability and better resistance against bad fuel
- High flow pumps utilize carbon commutators which increases durability and generates less heat, ensuring longer pump life
This Part Fits the Following OEM/Substitute Numbers:
00210179, 4020102, E84070N, SP1130, SP8132
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - GMC C35/C3500 Pickup | V | 5031 | 8 Cyl 5.0L | 307 |
Showing 1 - 10 of 11 products
Loading...