1983 Electric Fuel Pump Parts


Showing 1 - 10 of 57 products
Image
SKU
Product
Rating
Price

Delphi
  • Electric Fuel Pump
  • 2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank; Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 5
    • Maximum Pressure: 99.0
    • Fuel Type: Gas
    • Pump Type: Electric
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Wiring Harness Included: No
    • Position(s): In-line
    • System Pressure: 44 Psi
    • Terminal Type: Threaded
    • Terminal Gender: Male
    • Inlet Outside Diameter: 0.313
    • Average Flow Rating: 28
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
5211007, 5CA201, 67018, 67033, 67034, 67071, 69100, 69115, 951-3000, 9513000, AFS0001P, AFS0987S, CFD0029, E16020, E16045, E2000, E2002, E2036...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine Fuel Delivery Type Engine VIN Aspiration CID
1983 - Ford Thunderbird L - In-Line 4 Cyl 2.3L FI W Turbocharged 140

Carter
  • Fuel Pump - Electric In Line
  • Universal Electric Pump Replaces Mechanical Pump
  • Product Attributes:
    • Connector Gender: Male
    • Voltage: 12v
    • Maximum Pressure: 14.0
    • Negative Ground: Yes
    • Mounting Hardware Included: Yes
    • Fuel Type:
      • Diesel
      • Gas
    • Pump Type: Electric
    • Fuel Sending Unit Included: No
    • Length: 249.3
    • Pump Design: Gerotor
    • Fuel Pump Inlet Type: Hose Barb
    • Connector Shape: Spade
    • Outlet Outside Diameter: 9.0
    • Terminal Quantity: 2
    • Mounting Bracket Included: Yes
    • Seal And Lock Ring Included: No
    • Wiring Harness Included: No
    • Terminal Type: Blade
    • Terminal Gender: Male
    • Inlet Outside Diameter: 11.0
    • Regulator Included: No
    • Maximum Flow Rating: 25.0
    • Strainer Included: No
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

This Part Fits the Following OEM/Substitute Numbers:
151-1211, 152065, 225-60430, 23100-29225, 2950307, 37-02500, 37-09700, 3700318, 3701523, 371523, 4195148, 4319577, 4323062, 4335817, 4335818, 4434830, 56102, 5957869...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1983 - Plymouth Colt L 1410 In-Line 4 Cyl 1.4L -

Carter
  • Fuel Pump - Electric In Line
  • Universal Electric Pump Replaces Mechanical Pump; For safety reasons, it is recommended that an A68301 Safety Switch be installed with this replacement pump. This will prevent engine damage, and reduce the chance of fire should the engine stops running without the ignition switch being in the off position.
  • Product Attributes:
    • Voltage: 12v
    • Minimum Flow Rating: 26.4
    • Negative Ground: Yes
    • Mounting Hardware Included: Yes
    • Fuel Type:
      • Diesel
      • Gas
    • Pump Type: Electric
    • Fuel Sending Unit Included: No
    • Length: 112
    • Pump Design: Gerotor
    • Outlet Outside Diameter: 3/8
    • Inlet Fitting Thread Size: 1/8-27 Npt
    • Mounting Bracket Included: Yes
    • Minimum Pressure: 2.3
    • Seal And Lock Ring Included: No
    • Wiring Harness Included: No
    • Terminal Type: Lead Wire
    • Inlet Outside Diameter: 3/8
    • Regulator Included: No
    • Strainer Included: No
    • Wire Quantity: 2
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

This Part Fits the Following OEM/Substitute Numbers:
1234666, 151-1090, 151-1091, 16700-634-005, 16700-634-015, 16700-634-315, 16700-634-672, 16700-634-673, 19162977, 2126 087, 2421 110, 3621 674, 3700900, 3700901, 599-1011, 602-1249, 6472381, 69404...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1983 - Buick Riviera V 3800 In-Line 6 Cyl 3.8L 231

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle
1983 - Renault LeCar

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1983 - Dodge 600

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle Block CC Engine CID
1983 - Chevrolet K30 V - 8 Cyl 5.7L 350

Mr Gasket
  • For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 3.5
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Free Flow GPH: 28
    • Item Weight: 1.200 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1983 - Volkswagen Rabbit L 1715 4 Cyl 1.7L GL -

Delphi
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Lifetime Warranty

Additional Fitment Information:
Vehicle
1983 - Chevrolet Celebrity

Delphi
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Lifetime Warranty

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1983 - Volvo 760 V 2849 In-Tank 6 Cyl 2.8L -

Delphi
  • Electric Fuel Pump
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 6
    • Voltage: 14
    • Fuel Type: Gas
    • Pump Type: Electric
    • Outlet Outside Diameter: 0.313
    • Terminal Quantity: 2
    • Wiring Harness Included: Yes
    • Position(s): In-tank
    • System Pressure: 12 Psi
    • Terminal Type: Blade
    • Terminal Gender: Male
    • Average Flow Rating: 28
    • Strainer Included: No
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

This Part Fits the Following OEM/Substitute Numbers:
1AMFP00035, 25028889, 25115057, 25115097, 25115462, 25115463, 25115764, 25115951, 25115981, 25116164, 25116279, 25116280, 25116281, 25116285, 25116286, 25116562, 25117505, 25117506...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1983 - Oldsmobile Firenza L - In-Tank 4 Cyl 2.0L 122
Showing 1 - 10 of 57 products

Loading...