Image
Product
Price
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Male
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Gasket Or Seal Material: Nitrile Rubber
- Connector Shape: Terminals
- Minimum Pressure: 44
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 125.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.375
- 9.5
- Terminal Quantity: 2
- Gasket Or Seal Included: Yes
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Threaded
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
15101-61B03, 15110-61B00, 15110-61BT0, 152-0822, 152-0919, 1520922, 17040-SD4-000, 17040-SH5-A30, 17040-SK7-A70, 17040-SL0-A30, 17040-SL0-A31, 17040-SL0-L30, 17040-SL5-A30, 17040-SM4-A30, 17040-SP0-A30, 17040-SS0-A30, 17040-SS0-V30, 17708-SE0-935...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Toyota Cressida | L | 2754 | In-Tank | 6 Cyl 2.8L | - |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | LE Limited | - |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1985 - Toyota Corolla | L | 1587 | 4 Cyl 1.6L | LE | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Toyota Tercel |
Showing 1 - 10 of 36 products
Loading...