Image
Product
Price
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-18241, 7240-180, 74080, 97240180, NI, P7240-180, SS180-0427
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
- Fail-Safe Thermostat-170 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 170F Includes seal Alternate Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Gasket/Seal Material: Rubber
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.37 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7228-170, 72870, 97228170, NI, P7228-170, SS170-8227
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- High Flow Thermostat-170 Degrees
- Temperature 170F Alternate Temp
- High Flow
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.40 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12TP7C, 13967, 15397, 1601-24216, 2028-170, 212000C811, 2120040F00, 2120053J00, 2120053J10, 3, 33747, 33747S, 34011, 35967, 45967, 48447, 65287, 65967...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- Thermostat-170 Degrees
- Temperature 170F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.37 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19CJ, 170-822, 228-170, 22870, 3397, 9228170, NI, P3397
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.05 In
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T25E, 13859, 15859, 1601-290210, 204, 21200AA100, 21200AA120, 21200P7906, 21200V0105, 21200V0205, 21200V0206, 241-192, 24192, 317534302, 33479, 34020, 35859, 3859...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | DIESEL | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- (88°C/191°F)
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda 626 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 82C
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Mazda GLC |
- Thermostat-195 Degrees
- Temperature 195F Higher Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.37 In
- Temperature (Degree): 195
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19E, 131-151, 13399, 13779, 15119, 15399, 1601-24110, 228-195, 22895, 239, 33189, 3399, 35399, 8134146, 9228195, P3399, S339195, TX10987D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.12
- Flange Thickness: 0.06 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T19D, 13398, 13778, 139, 15118, 15398, 228-180, 22880, 33188, 3398, 35398, 9228180, MD094120, P3398, S339180
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Mazda RX-7 | R | 1146 | 2 Cyl 1.1L | - |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Jiggle Pin Weep Hole: Yes
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
022315171D, 101, 12T24D, 13868, 15868, 1601-24241, 17600-60814, 1760060811, 1760060812, 1760060813, 1760083811, 1760083821, 1760085830, 1760085831, 1767083000, 19300611005, 19300657003, 19300657812...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1985 - Mazda 626 | L | 1998 | GAS | 4 Cyl 2.0L | 122 |
Showing 1 - 10 of 12 products
Loading...