Image
Product
Price
- Fail-Safe Thermostat-170 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 170F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.66 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-291436, 7302-170, 73027, 97302170, NI, P7302-170, SS170-2037
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda S2000 | L | 2157 | 4 Cyl 2.2L | - |
- Thermostat-170 Degrees
- Temperature 170F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.04
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T26C, 15877, 1601-24243, 170-242, 19300PE0013, 19300PE0024, 19300PH7024, 19300PJ7003, 19300PL2004, 242-170, 24270, 3877, 9242170, P3877, TX14478D
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1339 | 4 Cyl 1.3L | - |
- Thermostat-180 Degrees
- Temperature 180F Alternate Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.04
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
105, 12T26D, 13878, 15878, 1601-24885, 19300PH7004, 19301P07316, 19301P07A00, 242-180, 24280, 33568, 33986, 35878, 3878, 48158, 9242180, P3878, QRT32...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1339 | 4 Cyl 1.3L | - |
- Thermostat-192 Degrees
- Temperature 192F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.38 In
- Temperature (Degree): 192
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T120E, 192-644, 19301PHM305, 19301RMX306, 34818, 446-192, 44692, 54692, 9446192, NI, P44692
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Insight | L | 995 | 3 Cyl 1.0L | 61 |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F Alternate Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.04
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.37 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-290997, 7242-180, 74280, 97242180, NI, P7242-180, SS180-2427
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1339 | 4 Cyl 1.3L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 78°C/172°F - OE Temp - The rubber thermostat gasket is serviced separately.
- (78°C/172°F)
- OE Temp - 78°C/172°F
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1700 | 4 Cyl 1.7L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- (78°C/172°F)
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Honda S2000 |
- Thermostat-170 Degrees
- Temperature 170F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.66 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12581519, 12T40C, 1305A237, 14127, 14337, 1601-24032, 19301P13000, 19301P13305, 19301P13306, 19301P8CA10, 19301P8EA10, 19301PR7305, 19301PR7307, 302-170, 30270, 33877, 33877S, 33914...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Pilot | V | 3475 | 6 Cyl 3.5L | - |
- Thermostat-170 Degrees
- Temperature 170F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.41 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T75C, 15187, 1601-24096, 170-823, 19300P08003, 19300PH7014, 19300PR3004, 19300PT0003, 19300PT0004, 19301P08000, 19301P08305, 19301P08315, 19301P08316, 19301P10307, 19301PAA305, 19301PAA306, 19301PLC315, 3187...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1700 | 4 Cyl 1.7L | - |
- Fail-Safe Thermostat-170 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 170F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.05
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.09 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.41 In
- Temperature (Degree): 170
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
7328-170, 73287, 97328170, NI, P7328-170, SS170-8237
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Honda Civic | L | 1700 | 4 Cyl 1.7L | - |
Showing 1 - 10 of 20 products
Loading...