1999 Engine Cooling Fan Clutch Parts
Choose a Make for your 1999 vehicle
Image
Product
Price
- Reverse Rotation; Tempatrol
- Fan Clutch; Reverse Rotation; Tempatrol;
- Fan Clutch
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fan Clutch
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1999 - Jeep Wrangler | L | - | 4 Cyl 2.5L | SE | 150 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch Includes Heavy Duty Tow Pkg. with AC
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
This Part Fits the Following OEM/Substitute Numbers:
067206, 11136973, 11146023, 140062, 15022299, 15022300, 15049054, 15073014, 15073580, 15089746, 15090986, 15154901, 15166906, 1540111, 154632, 154637, 154640, 154642...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - GMC K1500 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Optional Duty Thermal Fan Clutch with AC
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Savana 2500 | V | - | 8 Cyl 5.0L | 305 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Chevrolet P30 | V | - | 6 Cyl 4.3L | 262 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch with Trailer Tow Pkg.; with 4.10 Rear Axle Ratio with AC
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Chevrolet Silverado 2500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch w/o Trailer Tow Pkg.; with 3.08, 3.42, or 3.73 Rear Axle Ratio with AC
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - Chevrolet Silverado 2500 | V | 5328 | 8 Cyl 5.3L | 325 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch with Trailer Tow Pkg.; with 4.10 Rear Axle Ratio
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Sierra 1500 | V | - | 8 Cyl 4.8L | 294 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Optional Duty Thermal Fan Clutch Severe Duty Thermal Fan Clutch
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1999 - GMC Sierra 2500 | V | 5967 | 8 Cyl 6.0L | 364 |
- Reverse Rotation Severe Duty Thermal Fan Clutch
- ; Reverse Rotation Severe Duty Thermal Fan Clutch with AC
- Reverse Rotation Severe Duty Thermal Fan Clutch
- Fan Clutch
- Product Attributes:
- Overall Height IN: 3.77
- Performance Rated?: Yes
- Pilot Depth MM: 17.8
- Pilot Dia. MM: 30
- Rotation: Rev
- Clutch Type: D - Severe Duty & Truck Fan Drive
- Bolt Quantity: 4
- Use Type: Severe
- Meets / Exceeds OEM?: Yes
- New or Reman: New
- Fan Bolt Circle MM: 82.6
- Electronic Clutch?: Non Electronic
- Overall Height MM: 95.8
- Pilot Dia. IN: 1.18
- Fan Bolt Circle IN: 3.25
- Pilot Depth IN: 0.7
- Dia. IN: 6.45
- Description: Fan Clutches
- Overall Dia. MM: 163.8
- Clutch Maximum Diameter: 6.45
- Bolt Hole Quantity: 4
- Style: Severe Duty
- Mounting Hole Quantity: 4
- Mounting Hardware?: Not Included
- SDS Required: No (135233618)
- Bolt Thread: M10 X 1.5 Hole
- Distance From Clutch To Mounting Flange: 1.75
- Mounting Type: Hex
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - Oldsmobile Bravada |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1999 - BMW 323is |
Showing 1 - 10 of 42 products
Loading...