Image
Product
Price
- Oil Filter
- H-5.063 in.; OD-3 in.; 3/4 In. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 5.630 In. (143mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.250 In. (83mm)
- Package Material: Paperboard
- Product Box Length: 3.250 In. (83mm)
- PSI Relief Valve: 11-14
- Removal Nut: Yes
- Item Height: 5.063 In. (129mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1113566, 1220323, 1220445, 1220469, 1220800, 122A323, 122B323, 276217536, 276513, 277233, 4209146, 42532250, 47352, 480704, 507107, 507631, 51516, 51762...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Toyota Van | L | 1998 | 4 Cyl 2.0L | 122 |
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Height: 3.430
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 2.984
- Grade: Advanced
- Gasket Outside Diameter: 2.760
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130, 11-10103...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Toyota Cressida | L | 2754 | 6 Cyl 2.8L | - |
- Spin-on Oil Filter
- Ultra Synthetic
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.450
- Height: 3.430
- Non Slip Grip: Yes
- Gasket Thickness: 0.191
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Gold
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 2.984
- Grade: Ultimate
- Gasket Outside Diameter: 2.760
- Bypass Relief Valve: Yes
- Filter Media Material: Synthetic
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
000361, 00120-00012, 030 115 561F, 041-8077, 041-8097, 041-8162, 04E 115 561AC, 04E 115 561B, 04E 115 561H, 08922-02004, 08922-02010, 08922-02011, 10-01337, 10-01352, 10-01402, 10-50389, 10130, 11-10103...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Toyota Cressida |
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.420
- Height: 3.688
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 3.656
- Grade: Premium
- Gasket Outside Diameter: 2.797
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
00120-00005, 00120-00007, 00120-00011, 0128889-1A, 02 04 495, 039306, 041-0743, 041-8060, 041-8092, 041-8096, 041-8098, 041-8148, 041-8159, 041-8160, 041-8731, 041-8749, 050487, 05281090...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Toyota Corolla | L | 1839 | 4 Cyl 1.8L | - |
- High Performance Spin-on Oil Filter
- FRAM HIGH PERFORMANCE
- Product Attributes:
- Gasket Inside Diameter: 2.460
- Height: 5.535
- Non Slip Grip: No
- Gasket Thickness: 0.0354
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Inlet Type: Threaded
- Marine Approved: No
- Outside Diameter: 3.677
- Grade: Advanced
- Gasket Outside Diameter: 2.814
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-8144, 105000603000, 15590, 185515, 3120MP, 33120, 3609251, 3690251, 85622, 86120MP, 92622, B2-HPG, B252, B253, BF7613, BF992, BT8328, BT8434...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1984 - Toyota Land Cruiser | L | 3431 | 4 Cyl 3.4L | 209 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Inlet: 0.00
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Pickup | L | 2446 | United States | 4 Cyl 2.4L | - |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Capacity: 0.00
- Burst Pressure: 290
- Duty Type: Ld
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Synthetic
- Class: A
- Outlet: 0.00
- Inlet: 0.00
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Pickup | L | 2446 | Canada | 4 Cyl 2.4L | - |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Burst Pressure: 400
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 986 452 017, 0 986 452 028, 0 986 452 035, 0 986 452 038, 0 986 452 060, 0 986 452 558, 0 986 452 907, 0 986 452 917, 0 986 452 928, 0 986 AF0 061, 0 986 AF0 149, 0 986 AF1 028, 0 986 B00 048, 0060290915005, 0082115, 0410670, 0410750, 0410759...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | CID |
|---|---|---|---|---|---|---|
| 1984 - Toyota Corolla | L | 1587 | 4AC | United States | 4 Cyl 1.6L | - |
- Oil Filter
- H-4 in.; OD-3.656 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 1.100 Lbs. (0.5 Kg)
- Product Box Height: 4.100 In. (104mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.810 In. (97 Mm)
- Package Material: Paperboard
- Product Box Length: 3.900 In. (99mm)
- PSI Relief Valve: 8-11
- Removal Nut: No
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
1220185, 1220325, 122B185, 51068, 51084, 51085, 51362, 51521, AFL5071, EFL037, EFL039, EFL090, EFL37, FL137A, FL173A, FL228, FL259, FL264...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1984 - Toyota Pickup | L | 2366 | 4 Cyl 2.4L | Base | - |
- Engine Oil Filter
- Engine Oil Filter
- Engine Oil Filter - FTF Engine Oil Filter
- Product Attributes:
- Gasket Inside Diameter: 64.0
- Gasket Outside Diameter: 70.0
- Height: 85.0
- Bypass Relief Valve: Yes
- Filter Media Material: Paper
- Inside Thread Size: 0.75
- Anti-Drain Back Valve: Yes
- Working with various manufacturers, DENSO - already a global OEM leader in engine filtration components - continues to be an innovator and keeps DENSO ahead of the competition. First Time Fit Oil Filters are engineered to meet Denso's high quality standards delivering exemplary quality and performance. Quality assurance is guarenteed for Denso's First TIme Fit Oil Filters. You can be assured you're providing the best for your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
15600-25010, 15601-44011, 1S7Z 6731-DA, 21000872, 25014441, 25322837, 25325406, 31017520, 4105 409, 4105 409AB, 4105 409AC, 4105 409BB, 4105409AC, 4273 810, 4419 970, 4781 452AA, 4781452BB, 51068...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1984 - Toyota Land Cruiser |
Showing 1 - 10 of 60 products
Loading...