1985 Merkur Engine Oil Filter Parts
Image
Product
Price
- PROTEC-NEW Spin-On Lube Filter
- Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 0410365, 0410423, 0410563, 0418038, 0418159, 0451103325, 0451104065, 1 986 452 001, 1 986 452 002...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | Canada | 4 Cyl 2.3L | Turbocharged | 140 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | Canada | 4 Cyl 2.3L | Turbocharged | 140 |
- WIX Spin-On Lube Filter
- Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Burst Pressure: 290
- Duty Type: Ld
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Synthetic
- Class: A
- Outlet: 0.00
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 063, 0 451 203 001, 0 451 203 001-850, 0 451 203 153, 0 451 203 176, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 03 141 914, 00 03 563 591, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | Canada | 4 Cyl 2.3L | Turbocharged | 140 |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
- Turbo VIN Code "W"
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
Additional Fitment Information:
| Vehicle |
|---|
| 1985 - Merkur XR4Ti |
- FRAM, HP1, Oil Filter
- High Performance Spin-on Oil Filter
- FRAM HIGH PERFORMANCE
- Product Attributes:
- Gasket Inside Diameter: 2.460
- Non Slip Grip: No
- Gasket Thickness: 0.0354
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 500.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 3/4-16
- Bypass Relief Valve Setting: 22.000
- Marine Approved: No
- Grade: Advanced
- Gasket Outside Diameter: 2.814
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Low-restriction synthetic blend racing media designed for high oil flow. The media features 94% efficiency @20 microns for excellent engine protection**
- Silicone anti-drain back valve.
- Recommended maximum oil flow: 10-18gpm, depending on model***
- Maximum burst pressure: 350-500psi, depending on model***
- Maximum operating pressure: 200psi on all models***
- Compatible with all oil types, this filter is optimized for racing and high-performance street cars
- FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.**
This Part Fits the Following OEM/Substitute Numbers:
041-8144, 105000603000, 15590, 185515, 3120MP, 33120, 3609251, 3690251, 85622, 86120MP, 92622, B2-HPG, B252, B253, BF7613, BF992, BT8328, BT8434...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1985 - Merkur XR4Ti | L | - | 4 Cyl 2.3L | 140 |
Showing 1 - 10 of 13 products
Loading...