Image
Product
Price
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 13-19
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 001 181, 0 451 103 089, 0 451 103 106, 0 451 103 224, 0 451 105 191, 0 986 452 006, 0 986 452 016, 0 986 452 916, 0000230370, 00013505381, 0324-14300, 041-8086, 0410571, 0410639, 0410724, 0410736, 0410738, 0410784...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1986 - Mitsubishi Mighty Max | L | 1997 | United States | 4 Cyl 2.0L | 122 |
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Montero |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Spin-On
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Starion |
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Starion |
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Starion |
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Tredia |
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Starion |
- Engine Oil Filter
- Engine Oil Filter
- Engine Oil Filter - FTF Engine Oil Filter
- Product Attributes:
- Gasket Inside Diameter: 57.0
- Gasket Outside Diameter: 65.0
- Height: 85.0
- Bypass Relief Valve: Yes
- Filter Media Material: Paper
- Inside Thread Size:
- 0.79
- 0.80
- Anti-Drain Back Valve: Yes
- Working with various manufacturers, DENSO - already a global OEM leader in engine filtration components - continues to be an innovator and keeps DENSO ahead of the competition. First Time Fit Oil Filters are engineered to meet Denso's high quality standards delivering exemplary quality and performance. Quality assurance is guarenteed for Denso's First TIme Fit Oil Filters. You can be assured you're providing the best for your vehicle.
This Part Fits the Following OEM/Substitute Numbers:
12582255, 15208 AA15A, 15208 AA160, 15208-31U00, 15208-31U01, 15208-31U0A, 15208-31U0B, 15208-31U0C, 15208-7B000, 15208-9E000, 15208-9E01A, 152089E01A, 15208AA15A, 15400-PLM-A01, 15400-PLM-A02, 15400-PR3-305, 15400-RTA-003, 15400-RTA-004...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Mitsubishi Mirage |
- Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.469
- Height: 3.688
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 310.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 3.656
- Grade: Advanced
- Gasket Outside Diameter: 2.750
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-0739, 041-0752, 041-8086, 041-8092, 041-8122, 1-8A, 10-00918, 10-01238, 10-01287, 10-51287, 10-51477, 10068, 10238, 11-18303, 11-18305, 11-18501, 11-18505, 110951...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Mitsubishi Mighty Max | L | 1997 | 4 Cyl 2.0L | 122 |
- Oil Filter
- H-3.406 in.; OD-3.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Filter Material: High Flow Premium Media
- Removal Nut Size: 1.000 In.
- Gasket Material: Viton Rubber
- Product Box Width: 3.810 In. (97 Mm)
- Package Material: Paperboard
- Product Box Length: 3.810 In. (97mm)
- PSI Relief Valve: 11-17
- Item Height: 3.406 In. (87mm)
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Package Type: Box
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
006000789B91, 108566, 12915035150, 14501673990, 14501673991, 43820003, 51381, 6632745, 909213, 918648, E602132443, E620132443, FL403, L10193, M1105, M801209, MD013661, MD031805...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Mitsubishi Tredia | L | 1795 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 12 products
Loading...