Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Lancer | L | 1998 | 4 Cyl 2.0L | Evolution MR | 122 |
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Lancer | L | 1998 | 4 Cyl 2.0L | ES | 122 |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|
| 2010 - Mitsubishi Lancer | L | 1998 | 4B11 | 4 Cyl 2.0L | ES | U | Naturally Aspirated | 122 |
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Fuel Type | Engine | Fuel Delivery Type | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 2010 - Mitsubishi L200 | L | 2351 | 4G64 | GAS | 4 Cyl 2.4L | FI | Base | Turbocharged | - |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.69
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Class: A
- Outlet: 0.00
- Burst Pressure: 363
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Cellulose
- Inlet: 0.00
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1356, 1357, 164, 1717156, 21356, 21356MP, 31356, 5001200182, 51356, 51356XP, 51357, 61356, 61356BP, 618-51356, 618-51356MP, 8-51356, 84356HD, 85356...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Outlander | L | 2360 | Mexico | 4 Cyl 2.4L | 144 |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.243
- Burst Pressure: 330
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20-6/20
- Bypass Relief Valve Setting: 14
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
183, 27092, 27092MP, 57092, 618-57092, 618-57092MP, 67092, 67092BP, 7092, 8-57092, 84092, B4612, B4612MP, CF565, CF565AP, FDL9688, FPP9688, HM9688...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Galant | L | 2378 | Canada | 4 Cyl 2.4L | - |
- PRO-TEC Spin-On Lube Filter
- Master Pack Version; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.243
- Burst Pressure: 330
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20-6/20
- Bypass Relief Valve Setting: 14
- Flow Rate: 9-11 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
183, 27092, 27092MP, 57092, 618-57092, 618-57092MP, 67092, 67092BP, 7092, 8-57092, 84092, B4612, B4612MP, CF565, CF565AP, FDL9688, FPP9688, HM9688...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Eclipse | L | 2378 | Canada | 4 Cyl 2.4L | - |
- Spin-on Oil Filter Supersedes DL3593A (Consolidation)
- DEFENSE
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.125
- Height: 3.14
- Non Slip Grip: No
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 3
- Grade: Advanced
- Gasket Outside Diameter: 2.415
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Mitsubishi Outlander | L | 2351 | 4 Cyl 2.4L | - |
- Spin-on Oil Filter
- DEFENSE
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.125
- Height: 3.14
- Non Slip Grip: No
- Gasket Thickness: 0.200
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: White
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 12
- Inlet Type: Threaded
- Outside Diameter: 3
- Grade: Advanced
- Gasket Outside Diameter: 2.415
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
102703301, 122-0827, 1301, 1334, 15208-AA031, 15208-AA100, 15208-AA130, 15208-AA170, 15241-32092, 15410-ZJA-99AH, 16271-32090, 16271-32092, 16546-65F0E, 17-1706-8, 17-1723-6, 17-1741-2, 17-1893-0, 183...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2010 - Mitsubishi Lancer | L | 1998 | 4 Cyl 2.0L | Turbocharged | 122 |
- Spin-on Oil Filter
- Tough Guard
- Product Attributes:
- Reusable: No
- Grade Type: Premium
- Replacable Filter: Yes
- Gasket Inside Diameter: 2.266
- Height: 2.625
- Non Slip Grip: Yes
- Gasket Thickness: 0.203
- Torque Nut: No
- Attachment Type: Spin-on
- Gasket Type: Base
- Housing Color: Silver
- Inside Thread Diameter: M20x1.5
- Bypass Relief Valve Setting: 13
- Inlet Type: Threaded
- Outside Diameter: 2.690
- Grade: Premium
- Gasket Outside Diameter: 2.531
- Bypass Relief Valve: Yes
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
This Part Fits the Following OEM/Substitute Numbers:
041-8136, 0B631-14-302, 115010-6370, 119305-35150, 119305-35151, 1230A040, 124450-35100, 132 180 0010, 1365, 150-1008, 150-1011, 15208-31U0C, 15208-65F00, 15208-65F01, 15208-65F0A, 15208-65F0B, 15208-65F0C, 15208-65F0D...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Mitsubishi Outlander | V | 2998 | 6 Cyl 3.0L | 182 |
Showing 1 - 10 of 48 products
Loading...