Image
Product
Price
- High Performance Oil Pump
- Stock Volume +10 PSI Higher Pressure Over Stock Pressure, High Performance Oil Pump Hard Coat Anodized Aluminum Housing Exclusive Rotor Design For Improved Strength Phosphate Coated Cast Iron Cover Includes Optional Standard And +25 PSI Pressure Springs Threaded Pressure Relief Nut Uses 7/8 Inch Stock Bolt-On Oil Pickup Tube Includes O-Ring For Oil Pickup Tube
- 10295 High Performance, Standard Volume, High Pressure, Anodized Hardcoat Oil Pump With Gasket
- Performance
- Product Attributes:
- Oil Pump Pressure Type: High Pressure
- Adjustable Bypass Pressure: Yes
- Alternate Pressure Springs Included: Yes
- Grade Type: Performance
- Mounting Hole Diameter:
- 0.340
- 9.00
- Manufactured For: Gm Ls
- Screen Information: 7/8" Bolt On
- Rotor Material: Steel
- Mounting Hole Quantity: 4
- Upgrade for Pump Number: M295
- Additional Pressure Over Stock Percentage: 10 Psi
- Oil Pump Volume Type: Standard Volume
- Manufactured Pressure: (red) 70 Psi
- Optional Spring Pressure 1: (blue) 60 Psi
- Gasket Or Seal Included: Yes
- Optional Spring Pressure 2: Copo 85 Psi
- Drive Type: Crankshaft
- Pickup Tube Diameter:
- 0.875
- 22.00
- Oil Pump Type: Rotary
-
Features:
- Includes optional +25 psi high pressure spring for the COPO Camaro engines.
- Stock Volume, 10 PSI increase in pressure over M295 oil pump.
- Uses 7/8" diameter standard bolt on screen
- Cast iron cover is CNC machined and phosphate coated.
- Cast aluminum housing is CNC machined and hardcoat anodized.
- The relief valve features a screw in valve plug.
- High pressure performance upgrade for M295.
- Includes o-rings for screen assembly.
- Made in USA. Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling 10295 high performance oil pump is a high pressure, standard volume upgrade of the M295. The cast aluminum housing is CNC machined and hardcoat anodized. The cast iron cover is CNC machined and phosphate coated for improved pump performance and durability. The relief valve features a screw in valve plug with the optional lower stock pressure spring supplied. The oil pump and screen seals are included. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
10295
Additional Fitment Information:
| Vehicle | Engine VIN |
|---|---|
| 1997 - Chevrolet Corvette | G |
- High Performance Oil Pump
- 18% Higher Volume High Performance Oil Pump 10 PSI Higher Pressure Hard Coat Anodized Aluminum Housing Exclusive Rotor Design For Improved Strength Phosphate Coated Cast Iron Cover Includes Optional Standard And +25 PSI Pressure Springs Threaded Pressure Relief Nut Uses 7/8 Inch Stock Bolt-On Oil Pickup Tube Includes O-Ring For Oil Pickup Tube
- 10296 High Performance, High Volume, Standard Pressure, Anodized Hardcoat Oil Pump With Gasket
- Performance
- Product Attributes:
- Oil Pump Pressure Type: Standard Pressure
- Additional Volume Over Stock Percentage: 18%
- Adjustable Bypass Pressure: Yes
- Alternate Pressure Springs Included: Yes
- Grade Type: Performance
- Mounting Hole Diameter:
- 0.360
- 9.00
- Manufactured For: Gm Ls
- Screen Information: 7/8" Bolt On
- Rotor Material: Steel
- Mounting Hole Quantity: 4
- Upgrade for Pump Number: M295hv
- Oil Pump Volume Type: High Volume
- Manufactured Pressure: (red) 70 Psi
- Optional Spring Pressure 1: (blue) 60 Psi
- Gasket Or Seal Included: Yes
- Optional Spring Pressure 2: Copo 85 Psi
- Drive Type: Crankshaft
- Pickup Tube Diameter:
- 0.875
- 22.00
- Oil Pump Type: Rotary
-
Features:
- 18% increase in volume over M295 and 10295 oil pump.
- Cast aluminum housing is CNC machined and phosphate coated.
- Uses 7/8" diameter standard bolt on screen.
- High volume performance upgrade for M295HV.
- Cast aluminum housing is CNC machined and hardcoat anodized.
- Includes O-rings for screen assembly installation.
- The relief valve features a screw in valve plug.
- Includes installed +10 psi higher pressure relief spring and optional lower standard pressure relief spring.
- Made in USA. Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling 10296 high performance oil pump is a 18% high volume upgrade of the M296. The cast aluminum housing is CNC machined and hardcoat anodized. The cast iron cover is CNC machined and phosphate coated for improved pump performance and durability. The relief valve features a screw in valve plug with the optional lower stock pressure spring supplied. The oil pump and screen seals are included. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
10296
Additional Fitment Information:
| Vehicle | Engine VIN |
|---|---|
| 1997 - Chevrolet Corvette | G |
- High Performance Oil Pump
- 25% Higher Volume High Performance Oil Pump 10 PSI Higher Pressure Relief Spring Installed Exclusive Billet Steel Shark Tooth Helical Pump Gears Drive & Idler Shafts Extended Into Cover Includes 12550 Chrome Moly Steel Intermediate Shaft With Steel Guide Threaded Pressure Relief Nut Includes Optional Pressure Springs (-10 PSI And +10 PSI) Uses 3/4 Inch Diameter Press-Fit Or Bolt-On Pickup Tube Assembly (Not Included) Includes Oil Pump Pickup Tube Gasket, Assembly Bolts, And Wrench
- 10555ST High Performance, High Volume, High Pressure, Billet Steel Oil Pump With Gasket
- Performance
- Product Attributes:
- Oil Pump Pressure Type: High Pressure
- Additional Volume Over Stock Percentage: 25%
- Adjustable Bypass Pressure: Yes
- Alternate Pressure Springs Included: Yes
- Grade Type: Performance
- Mounting Hole Diameter:
- 0.240
- 6.00
- Anti-Cavitation: No
- Manufactured For: Gm Sbc
- Screen Information: 3/4" Bolt On/press In
- Mounting Hole Quantity: 2
- Upgrade for Pump Number: N/a
- Additional Cover Shaft Support: Yes
- Gear Material: Billet Steel
- Oil Pump Volume Type: High Volume
- Manufactured Pressure: (pink) 70 Psi
- Optional Spring Pressure 1: (yellow) 58 Psi
- Gasket Or Seal Included: Yes
- Gear Type: Shark Tooth Helical Gear
- Optional Spring Pressure 2: (green) 80 Psi
- Drive Shaft Included: Yes
- Drive Type: Drive Shaft
- Pickup Tube Diameter:
- 0.750
- 19.00
- Oil Pump Type: Gear
-
Features:
- Extended drive and idler shaft for additional support in the cover eliminating dynamic shfaft deflection at increased RPM levels.
- Features billet steel "Shark Tooth" helical gears.
- Relief hole in cover uses screw in plug instead of pressed cup plug.
- Housing and Cover are CNC machined and phosphate coated.
- Includes +10PSI higher pressure relief spring and optional -10PSI relief spring.
- Screw in plug retains relief valve spring instead of pin.
- Cover is doweled to the pump housing to assure alignment of the shaft bores.
- Includes 12550 chrome moly intermediate shaft with steel guide.
- Made in USA. Melling high performance oil pumps provide dependable performance every time in every application under the toughest RPM conditions. The Melling high performance cast iron oil pump series features a doweled housing and cover, extended drive and idler shafts for additional support at increased RPM’s, a screw in relief spring plug, CNC machined cover and housing that is manganese phosphate coated, standard volume and high volume patented billet Shark Tooth gears, and a chrome moly drive shaft with steel guide. Includes lower pressure spring and self locking socket head bolts with wrench for use with bolt on screen pumps. Every Melling high performance oil pump is individually tested for pressure and flow under actual engine operating conditions. Melling high performance Shark Tooth oil pumps are recommended for all applications where a high performance oil pump is needed.
This Part Fits the Following OEM/Substitute Numbers:
10555ST
Additional Fitment Information:
| Vehicle | Fuel Type |
|---|---|
| 1997 - Chevrolet K1500 Suburban | GAS |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford E-150 Econoline | V | - | 8 Cyl 4.6L | 281 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Gasket 15066-21001 (pump to engine) is also required. but is not included with the oil pump. Order separately.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Nissan Pickup |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Volkswagen Passat | V | 2771 | 6 Cyl 2.8L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Secondary Pump
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Porsche Boxster |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Volkswagen Jetta | L | 1984 | 4 Cyl 2.0L | 121 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Requires separate gasket part # 15197-74040.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Toyota Camry | L | 2164 | 4 Cyl 2.2L | - |
- Engine Oil Pump Kit;
- Engine Oil Pump Kit
- Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
-
Features:
- Engine Oil Pump Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep TJ |
Showing 1 - 10 of 57 products
Loading...