2006 Chrysler Exhaust Muffler Parts
Choose a Model for your 2006 Chrysler
Image
Product
Price
- DynoMax Ultra-Flo Welded Muffler
- Oval; 3 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Offset; Reversible; Stainless Steel LH - Drivers Side
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler 300 | V | 6059 | 8 Cyl 6.1L | C SRT8 | 370 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- w/o Stow and Go
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Town & Country | V | 3301 | 6 Cyl 3.3L | 201 |
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Chrysler Pacifica |
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Chrysler Pacifica |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Town & Country | V | 3301 | 6 Cyl 3.3L | 201 |
- 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- Super 44™ Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Offset Outlet
-
Features:
- Durable Fully Welded 16ga Stainless Steel
- Limited Lifetime Warranty
- Deep Aggressive Exhaust Note
- Noticeable Interior Resonance
- Recent Two Chamber Improvement
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- Flowmaster's Super 44 muffler uses the same Delta Flow(R) technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we've ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
11235, 14235, 14335
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- 2.25 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Offset Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler 300 | V | - | 8 Cyl 5.7L | C | 345 |
- 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
- Outlet Type: Single Outlet
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler 300 | V | 3497 | 6 Cyl 3.5L | Touring | 215 |
- 40 Series™ Muffler
- 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series(TM) Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Aggressive Exterior Exhaust Tone
- Noticeable Interior Resonance
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler PT Cruiser | L | 2429 | 4 Cyl 2.4L | 148 |
- Super 44™ Delta Flow Muffler
- 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- Super 44™ Delta Flow Muffler; 2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- Super 44(TM) Delta Flow Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Type: Single Offset
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
- Outlet Type: Single Center Outlet
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Deep Aggressive Exhaust Note
- Noticeable Interior Resonance
- Recent Two Chamber Improvement
- Race Proven Patented Delta Flow® Technology
- No Internal Packing To Blowout
- Premium Flowmaster Quality
- Flowmaster's Super 44 muffler uses the same Delta Flow(R) technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we've ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler PT Cruiser | L | 2429 | 4 Cyl 2.4L | 148 |
Showing 1 - 10 of 33 products
Loading...