Image
Product
Price
- DynoMax Ultra-Flo Welded Muffler
- Oval; 3 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Offset; Reversible; Stainless Steel LH/RH Side
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Challenger | V | 6059 | 8 Cyl 6.1L | SRT8 | 370 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 2.25" ID
Additional Fitment Information:
| Vehicle | Engine Designation |
|---|---|
| 2010 - Dodge Avenger | EDG |
- 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Charger | V | 3497 | 6 Cyl 3.5L | SXT | 215 |
- 2.5 Offset In/2.5 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.5 Offset In/2.5 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.500 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.500 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Dakota | V | - | 6 Cyl 3.7L | Laramie | 226 |
- Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel Fits Models w/Factory Dual Tailpipes Only
- FlowFX Direct Fit Muffler Kit; Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel;
- FlowFX Direct Fit Muffler Kit
- Product Attributes:
- Tip Quantity: 0
- Tubing Material: 409s Stainless Steel
- Muffler Overall Length: 39.300 In.
- Muffler Type: Absorption
- Catalytic Converter Included: No
- Outlet Position: Dual
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: Flow Fx
- Heat Shield Attached: No
- Muffler Color: Natural
- Tip Type: Not Included
- Muffler Series: Flow Fx
- Muffler Inlet Location: Center
- Muffler Body Length: 14.000 In.
- Exit Position: Dual Out Rear
- Muffler Count: 1
- Muffler Finish: Brushed
- System Type: D-fit Muffler
- Muffler Body Material: 409s Stainless Steel
- Inlet Position: Dual
- Muffler Part Number: Kit Only
- Muffler Outlet Location: Dual Outlet
-
Features:
- Dyno-Tuned For Maximum Performance
- Bright Stainless Steel Mandrel Bent Tubing
- Moderate/Aggressive Sound
- Made in the USA
- Limited Lifetime Warranty
- Designed as a economical solution to a cat-back exhaust system, this direct-fit replacement muffler is for all 2009-2023* (*Classic body) RAM 1500 with the 5.7L Hemi engine and factory dual tailpipes. This easy to install direct-fit muffler delivers a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep powerful exhaust note. Features include 3.00-inch mandrel-bent stainless steel tubing flowing into a specially designed dual 3.00-inch inlet/outlet Flow FX "straight-through" muffler for great sound and maximum performance. Utilizes the factory hangers and connections without any cutting or welding and installs in about 25 minutes. Includes all necessary parts, hardware and easy to follow installation instructions. Notes: Fits all 2/4 wheel drives and wheelbases with factory dual tailpipes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Ram 1500 | V | - | 8 Cyl 5.7L | 345 |
- 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Aggressive Sound Exterior Exhaust Tone
- Noticeable Interior Resonance
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Charger | V | 3497 | 6 Cyl 3.5L | SXT | 215 |
- 40 Series™ Muffler
- 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series(TM) Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- Outlet Connection Type: Pipe
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Aggressive Sound Exterior Exhaust Tone
- Noticeable Interior Resonance
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Dodge Charger | V | 3497 | 6 Cyl 3.5L | SE | 215 |
- 50 Series™ SUV Muffler
- 2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ SUV Muffler; 2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series(TM) SUV Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.500 In.
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 50 Series
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Main Piping Diameter: 2.500 In.
- Inlet Position: Center
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice for Large Displacement Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The Super 50 series muffler is a larger version of Flowmaster's 50 series Delta Flow(R) muffler. Originally designed for trucks and SUV's, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Dodge Nitro | V | 3952 | 6 Cyl 4.0L | 241 |
- Chambered
- 16 Inch Overall Length
- MaxFlow Xtreme Muffler
- Product Attributes:
- Internal Construction: Chambered
- Outlet Position: Offset Dual
- Tip Finish: No Tip
- Case Length (IN): 10 Inch
- Includes Tip: No
- Tip Diameter (IN): No Tip
- Tip Length (IN): No Tip
- Color/ Finish: Electropolished
- Prop 65 Y/N: Y
- Tip Material: No Tip
- Inlet Position: Center Single
- Material: Stainless Steel
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- All T-304 Stainless Steel Internal Components Which Will Not Pit Or Rust From The Inside Out
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The Muffler
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme Mufflers by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust, including all internal parts. 300 series stainless steel weld filler supports the overall quality and durability of the muffler. The chambered muffler delivers a rich, aggressive tone that will turn heads and make you smile.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2010 - Dodge Ram 1500 | SLT |
- Dual; Dual Out Rear Exit; Includes 3 in. Tubing/3 in. Round Tip; 409 Stainless Steel; w/Active Valve
- FlowFX Direct Fit Muffler Kit; Dual; Dual Out Rear Exit; Includes 3 in. Tubing/3 in. Round Tip; 409 Stainless Steel; w/Active Valve;
- FlowFX Direct Fit Muffler Kit
- Product Attributes:
- Tip Quantity: 1
- Shape: Round
- Outlet Position: Center
- WARNING CA Proposition 65: Yes
- Inlet Position: Offset
-
Features:
- Deep Performance Tone From Flowfx Muffler
- Very Aggressive Tone With Active By-pass
- Wireless Controlled Actuator Motor
- Includes Two Wireless Remotes
- Featuring W.A.V.E. Technology
- Mandrel-Bent 16 Gauge Tubing
- Direct-fit Replacement Muffler
- Includes A High Quality Valve
- Stainless Steel Construction
- Introducing the new Flow FX(R) Active dual-mode muffler featuring our new W.A.V.E. Technology(TM) (Wireless Active Valve Exhaust(TM)) for all 2009-2023* RAM 1500 (*Classic body) trucks with the 5.7L Hemi engine and factory dual exit exhaust. This direct-fit replacement muffler has split personalities with a nice performance tone over the stock exhaust system, thanks to the Flow FX performance muffler but also features a high quality wireless controlled actuator valve on the Power Chamber(R) redirecting exhaust through the turn down giving you that deep open exhaust sound with just a push of a button. System features include mandrel-bent stainless steel construction leading into the Power Chamber, followed by a round Flow FX performance muffler that easily connects to the factory tailpipes. The Power Chamber houses a wireless controlled valve with a large 3.00-inch turndown dump style tailpipe letting everyone know who the Boss is once activated. Other system features include the actuator motor, a control unit, two wireless key fobs, all necessary wiring, hardware and detailed instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Ram 1500 | V | - | 8 Cyl 5.7L | 67.4 | Crew Cab Pickup | 345 |
Showing 1 - 10 of 58 products
Loading...