2010 Ford Exhaust Muffler Parts
Choose a Model for your 2010 Ford
Image
Product
Price
- DynoMax Ultra-Flo Welded Muffler
- Oval; 3 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Center; Reversible; Stainless Steel
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford F-250 Super Duty | V | - | 8 Cyl 5.4L | King Ranch | 330 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes Resonator
- Rear
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Ford Escape | L | 2488 | Rear | 4 Cyl 2.5L | 152 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes Resonator
- Rear
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2010 - Ford Escape | V | 2968 | Rear | 6 Cyl 3.0L | 181 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2010 - Ford Escape | Front | GAS |
- 70 Series™ Big Block II Muffler
- 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 70 Series™ Big Block II Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel;
- 70 Series(TM) Big Block II Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: 70 Series Big Block
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Stock to Mild Exterior Exhaust Tone
- Minimal Interior Resonance
- Recommended For SUV/Trucks/Motorhomes/Tow Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The 70 series utilizes Flowmaster's Delta Flow(R) technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford Expedition | V | - | 8 Cyl 5.4L | Max Eddie Bauer | 330 |
- 3 Offset In/3 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 3 Offset In/3 Center Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Center
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford Expedition | V | - | 8 Cyl 5.4L | King Ranch | 330 |
- 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford Mustang | V | - | 6 Cyl 4.0L | Base | 245 |
- 2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Center
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2010 - Ford Explorer | V | - | 6 Cyl 4.0L | 245 |
- 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ SUV Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series™ SUV Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 50 Series
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice for Large Displacement Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The Super 50 series muffler is a larger version of Flowmaster's 50 series Delta Flow(R) muffler. Originally designed for trucks and SUV's, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford Expedition | V | - | 8 Cyl 5.4L | Max Eddie Bauer | 330 |
- 50 Series™ SUV Muffler
- 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 50 Series™ SUV Muffler; 3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel;
- 50 Series(TM) SUV Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: Super 50 Series
- Inlet Position: Offset
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Mild to Moderate Exterior Exhaust Tone
- Minimal Interior Resonance
- Excellent Choice for Large Displacement Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The Super 50 series muffler is a larger version of Flowmaster's 50 series Delta Flow(R) muffler. Originally designed for trucks and SUV's, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2010 - Ford Expedition | V | - | 8 Cyl 5.4L | King Ranch | 330 |
Showing 1 - 10 of 62 products
Loading...