2012 Ford Exhaust Muffler Parts
Choose a Model for your 2012 Ford
Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes Resonator
- Rear
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford Escape | L | 2488 | Rear | 4 Cyl 2.5L | 152 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2012 - Ford Escape | Front | GAS |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes Resonator
- Rear
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford Escape | V | 2968 | Rear | 6 Cyl 3.0L | 181 |
- 3.0 in. Inlet/Outlet; 4 in. Case Diameter x 16.75 in. Case Length; [Available While Supplies Last] Not Direct Fit-Some Adaptation Required
- Outlaw Series™ Race Muffler; 3.0 in. Inlet/Outlet; 4 in. Case Diameter x 16.75 in. Case Length; [Available While Supplies Last];
- Outlaw Series™ Race Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Muffler Series: Outlaw Delta Force
- Shape: Round
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16 Gauge Aluminized Steel
- Round Case Allows Install In Limited Space Apps
- Designed for Maximum Horsepower and Torque
- Minimal Decibel Reduction
- Race Application Where Muffler Rules are in Effect
- No Internal Packing To Blow Out
- Premium Flowmaster Quality
- Outlaw mufflers are designed to be connected directly to the header collectors or can be added into an existing exhaust system. Recommended for racing applications where a muffler is required without a set decibel limit to be met.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT | 302 |
- Outlaw Series™ Race Muffler
- 3.0 in. Inlet/Outlet; 4 in. Case Diameter x 16.75 in. Case Length; [Available While Supplies Last] Not Direct Fit-Some Adaptation Required
- Outlaw Series™ Race Muffler; 3.0 in. Inlet/Outlet; 4 in. Case Diameter x 16.75 in. Case Length; [Available While Supplies Last];
- Outlaw Series(TM) Race Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Muffler Series: Outlaw Delta Force
- Shape: Round
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16 Gauge Aluminized Steel
- Round Case Allows Install In Limited Space Apps
- Designed for Maximum Horsepower and Torque
- Minimal Decibel Reduction
- Race Application Where Muffler Rules are in Effect
- No Internal Packing To Blow Out
- Premium Flowmaster Quality
- Outlaw mufflers are designed to be connected directly to the header collectors or can be added into an existing exhaust system. Recommended for racing applications where a muffler is required without a set decibel limit to be met.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 4951 | 8 Cyl 5.0L | GT | 302 |
- 3.0 in. Center Inlet/Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 70 Series™ Big Block II Muffler; 3.0 in. Center Inlet/Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel;
- 70 Series™ Big Block II Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: 70 Series Big Block
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Stock to Mild Exterior Exhaust Tone
- Minimal Interior Resonance
- Recommended For SUV/Trucks/Motorhomes/Tow Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The 70 series utilizes Flowmaster's Delta Flow(R) technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | FX4 | 302 |
- 70 Series™ Big Block II Muffler
- 3.0 in. Center Inlet/Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 70 Series™ Big Block II Muffler; 3.0 in. Center Inlet/Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel;
- 70 Series(TM) Big Block II Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Center
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 10.000 In.
- Muffler Series: 70 Series Big Block
- Inlet Position: Center
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- 3 Year Limited Warranty
- Stock to Mild Exterior Exhaust Tone
- Minimal Interior Resonance
- Recommended For SUV/Trucks/Motorhomes/Tow Vehicles
- Improved HP/TQ and Potential Mileage Improvement
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- The 70 series utilizes Flowmaster's Delta Flow(R) technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV's, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | FX2 | 302 |
- 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Aggressive Sound Exterior Exhaust Tone
- Noticeable Interior Resonance
- Excellent Street/Strip And Off Road Application
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | Base | 227 |
- 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required
- FlowFX Muffler; 2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel;
- FlowFX Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 20.000 In.
- Muffler Type: Absorption
- Outlet Connection Type: Clamp-on
- Outlet Position: Offset (opposite)
- WARNING CA Proposition 65: Yes
- Muffler Body Width: 9.000 In.
- Muffler Series: Flow Fx
- Inlet Inside Diameter: 2.250 In.
- Muffler Body Length: 14.000 In.
- Main Piping Diameter: 2.250 In.
- Outlet Quantity: 1
- Inlet Quantity: 1
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Clamp-on
-
Features:
- Not A Direct Fit
- Moderate Sound
- Straight Through Style
- Fully Welded Steel Case
- Flowmaster's Flow FX series mufflers deliver a moderate performance tone for the enthusiast looking for an exhaust note that is different from the "chambered" muffler sound. The interior features a large 3.00-inch "straight-through" stainless steel perforated core, surrounded with high-temperature sound absorption materials delivering a deep traditional mellow tone. The internal flow design is reversible, so the muffler can be installed in either direction to best suit the vehicle application and offsets needed. Features include fully MIG-welded "bright" 409 stainless steel construction with the Flow FX logo embossed on both sides of the case. The Flow FX line of mufflers is perfect for the person looking for a show quality performance muffler at an economical price point and in a compact sized case.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | Base | 227 |
- 2.25 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required
- 40 Series™ Muffler; 2.25 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel;
- 40 Series™ Muffler
- Product Attributes:
- Tip Quantity: 0
- Automotive Item Grade: High Performance
- Muffler Type: Reflection
- Outlet Connection Type: Pipe
- Outlet Position: Offset
- Inlet Diameter: 2.250 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Muffler Series: 40 Series
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Main Piping Diameter: Oem
- Inlet Position: Offset
- Inlet Outside Diameter: 2.250 In.
- Inlet Connection Type: Pipe
-
Features:
- Durable Fully Welded 16ga Aluminized Steel
- Aggressive And Powerful Exterior Exhaust Tone
- Notable Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- The Original Two Chamber Design
- Premium Flowmaster Quality
- The Original 40 series muffler delivers an aggressive exterior and interior tone. If you're looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ford Mustang | V | 3726 | 6 Cyl 3.7L | Base | 227 |
Showing 1 - 10 of 42 products
Loading...