2017 Ram Exhaust Muffler Parts
Image
Product
Price
- Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel Fits Models w/Factory Dual Tailpipes Only
- FlowFX Direct Fit Muffler Kit; Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel;
- FlowFX Direct Fit Muffler Kit
- Product Attributes:
- Tip Quantity: 0
- Tubing Material: 409s Stainless Steel
- Muffler Overall Length: 39.300 In.
- Muffler Type: Absorption
- Catalytic Converter Included: No
- Outlet Position: Dual
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: Flow Fx
- Heat Shield Attached: No
- Muffler Color: Natural
- Tip Type: Not Included
- Muffler Series: Flow Fx
- Muffler Inlet Location: Center
- Muffler Body Length: 14.000 In.
- Exit Position: Dual Out Rear
- Muffler Count: 1
- Muffler Finish: Brushed
- System Type: D-fit Muffler
- Muffler Body Material: 409s Stainless Steel
- Inlet Position: Dual
- Muffler Part Number: Kit Only
- Muffler Outlet Location: Dual Outlet
-
Features:
- Dyno-Tuned For Maximum Performance
- Bright Stainless Steel Mandrel Bent Tubing
- Moderate/Aggressive Sound
- Made in the USA
- Limited Lifetime Warranty
- Designed as a economical solution to a cat-back exhaust system, this direct-fit replacement muffler is for all 2009-2023* (*Classic body) RAM 1500 with the 5.7L Hemi engine and factory dual tailpipes. This easy to install direct-fit muffler delivers a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep powerful exhaust note. Features include 3.00-inch mandrel-bent stainless steel tubing flowing into a specially designed dual 3.00-inch inlet/outlet Flow FX "straight-through" muffler for great sound and maximum performance. Utilizes the factory hangers and connections without any cutting or welding and installs in about 25 minutes. Includes all necessary parts, hardware and easy to follow installation instructions. Notes: Fits all 2/4 wheel drives and wheelbases with factory dual tailpipes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | 76.3 | SLT | 345 |
- Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel
- FlowFX Direct Fit Muffler Kit; Dual; Dual Out Rear Exit; Includes 3 in. Tubing/Straight Through Mufflers; No Tip; 409 Stainless Steel;
- FlowFX Direct Fit Muffler Kit
- Product Attributes:
- Tip Quantity: 0
- Tubing Material: 409s Stainless Steel
- Muffler Overall Length: 39.300 In.
- Muffler Type: Absorption
- Catalytic Converter Included: No
- Outlet Position: Dual
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: Flow Fx
- Heat Shield Attached: No
- Muffler Color: Natural
- Tip Type: Not Included
- Muffler Series: Flow Fx
- Muffler Inlet Location: Center
- Muffler Body Length: 14.000 In.
- Exit Position: Dual Out Rear
- Muffler Count: 1
- Muffler Finish: Brushed
- System Type: D-fit Muffler
- Muffler Body Material: 409s Stainless Steel
- Inlet Position: Dual
- Muffler Part Number: Kit Only
- Muffler Outlet Location: Dual Outlet
-
Features:
- Dyno-Tuned For Maximum Performance
- Bright Stainless Steel Mandrel Bent Tubing
- Moderate/Aggressive Sound
- Made in the USA
- Limited Lifetime Warranty
- Designed as a economical solution to a cat-back exhaust system, this direct-fit replacement muffler is for all 2009-2023* (*Classic body) RAM 1500 with the 5.7L Hemi engine and factory dual tailpipes. This easy to install direct-fit muffler delivers a moderate to aggressive interior and exterior sound level that will appeal to anyone looking for a deep powerful exhaust note. Features include 3.00-inch mandrel-bent stainless steel tubing flowing into a specially designed dual 3.00-inch inlet/outlet Flow FX "straight-through" muffler for great sound and maximum performance. Utilizes the factory hangers and connections without any cutting or welding and installs in about 25 minutes. Includes all necessary parts, hardware and easy to follow installation instructions. Notes: Fits all 2/4 wheel drives and wheelbases with factory dual tailpipes.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | 67.4 | Special Service | 345 |
- Dual Rear Exit; 3.0 in. Inlet; 2.25 Outlet; Oval; 3 in. Tubing; Welded Baffle; Black; Stainless Steel With Factory Dual Tailpipes Only
- Outlaw® Series Direct Fit Muffler; Dual Rear Exit; 3.0 in. Inlet; 2.25 Outlet; Oval; 3 in. Tubing; Welded Baffle; Black; Stainless Steel;
- Outlaw® Series Direct Fit Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Welded Baffle
- Outlet Position: Dual Rear
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Heat Shield Attached: No
- Muffler Series: Outlaw
- Exit Position: Dual Rear
- Muffler Count: 1
- System Type: D-fit Muffler
- Inlet Position: Offset
- Muffler Part Number: Kit Only
-
Features:
- Stainless Steel Construction
- Dyno Tuned for Maximum Performance
- Race Proven Outlaw Muffler Technology
- Made in the USA
- Limited Lifetime Warranty
- The Flowmaster Outlaw(R) direct-fit muffler for 2009-2023* (*Classic body) RAM 1500 trucks with the 5.7L Hemi and factory dual tailpipes, is perfect for the person looking for a very deep and aggressive sound level inside and outside the vehicle. This system is not for the faint of heart! This bolt-on stainless steel system gives you all the performance benefits and sound that you've come to expect from Flowmaster(R) and features a 3.00-inch mandrel-bent inlet tube flowing into a specially designed Outlaw muffler and exits into dual 2.50-inch outlet pipes which connect perfectly to the factory dual tailpipes. The system uses the factory hanger locations for a quick and easy installation you can do at home. Includes all necessary parts, hardware and easy to follow instructions. Covered by our Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | Laramie Longhorn | 345 |
- Outlaw® Series Direct Fit Muffler
- Dual Rear Exit; 3.0 in. Inlet; 2.25 Outlet; Oval; 3 in. Tubing; Welded Baffle; Black; Stainless Steel With Factory Dual Tailpipes Only
- Outlaw® Series Direct Fit Muffler; Dual Rear Exit; 3.0 in. Inlet; 2.25 Outlet; Oval; 3 in. Tubing; Welded Baffle; Black; Stainless Steel;
- Outlaw(R) Series Direct Fit Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Type: Welded Baffle
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Dual Rear
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Heat Shield Attached: No
- Muffler Series: Outlaw
- Exit Position: Dual Rear
- Muffler Count: 1
- System Type: D-fit Muffler
- Inlet Position: Offset
- Muffler Part Number: Kit Only
-
Features:
- Stainless Steel Construction
- Dyno Tuned for Maximum Performance
- Race Proven Outlaw Muffler Technology
- Made in the USA
- Limited Lifetime Warranty
- The Flowmaster Outlaw(R) direct-fit muffler for 2009-2023* (*Classic body) RAM 1500 trucks with the 5.7L Hemi and factory dual tailpipes, is perfect for the person looking for a very deep and aggressive sound level inside and outside the vehicle. This system is not for the faint of heart! This bolt-on stainless steel system gives you all the performance benefits and sound that you've come to expect from Flowmaster(R) and features a 3.00-inch mandrel-bent inlet tube flowing into a specially designed Outlaw muffler and exits into dual 2.50-inch outlet pipes which connect perfectly to the factory dual tailpipes. The system uses the factory hanger locations for a quick and easy installation you can do at home. Includes all necessary parts, hardware and easy to follow instructions. Covered by our Lifetime Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | Special Service | 345 |
- 50 Series™ Heavy Duty Muffler
- 3.0 in. Offset Inlet/2.25 in. Dual Outlet; Moderate Sound; 409 Stainless Steel With Factory Dual Tailpipes Only
- 50 Series™ Heavy Duty Muffler; 3.0 in. Offset Inlet/2.25 in. Dual Outlet; Moderate Sound; 409 Stainless Steel;
- 50 Series(TM) Heavy Duty Muffler
- Product Attributes:
- Tip Quantity: 0
- California Proposition 65 Chemical Name 2: Chromium (hexavalent Compounds)
- California Proposition 65 Chemical Name 1: Nickel (metallic)
- Outlet Position: Dual
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Body Width: Oem
- Muffler Series: 50 Series Hd
- Body Height: Oem
- Outlet Outside Diameter: 2.250 In.
- Muffler Count: 1
- System Type: D-fit Muffler
- Inlet Position: Offset
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Limited Lifetime Warranty
- Moderate Exterior Exhaust Tone
- Reduced Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- Dyno Tuned for Maximum Performance
- Stainless Steel Construction
- This Flowmaster(R) American Thunder(R) direct-fit muffler fits all 2009-2023* (*Classic body) RAM 1500 trucks equipped with the 5.7L Hemi and factory dual tailpipes. Features include full stainless steel construction, a 3.00-inch mandrel-bent inlet pipe flowing into a 50 Series HD(TM) muffler with large 4.00-inch internals and a built-in resonator helping keep the interior sound down to a minimum, while still delivering a deep moderate aggressive tone outside the vehicle. The system attaches to the factory hanger locations and includes all necessary hardware for a quick and easy installation that you can do at home. Covered by our Lifetime Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | 76.3 | Tradesman | 345 |
- 3.0 in. Offset Inlet/2.25 in. Dual Outlet; Moderate Sound; 409 Stainless Steel With Factory Dual Tailpipes Only
- 50 Series™ Heavy Duty Muffler; 3.0 in. Offset Inlet/2.25 in. Dual Outlet; Moderate Sound; 409 Stainless Steel;
- 50 Series™ Heavy Duty Muffler
- Product Attributes:
- Tip Quantity: 0
- Outlet Position: Dual
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Body Width: Oem
- Muffler Series: 50 Series Hd
- Body Height: Oem
- Outlet Outside Diameter: 2.250 In.
- Muffler Count: 1
- System Type: D-fit Muffler
- Inlet Position: Offset
-
Features:
- Durable Fully Welded 409 Stainless Steel
- Limited Lifetime Warranty
- Moderate Exterior Exhaust Tone
- Reduced Interior Resonance
- Excellent Street/Strip And Off Road Application
- No Internal Packing To Blowout
- Race Proven Patented Delta Flow® Technology
- Premium Flowmaster Quality
- Dyno Tuned for Maximum Performance
- Stainless Steel Construction
- This Flowmaster(R) American Thunder(R) direct-fit muffler fits all 2009-2023* (*Classic body) RAM 1500 trucks equipped with the 5.7L Hemi and factory dual tailpipes. Features include full stainless steel construction, a 3.00-inch mandrel-bent inlet pipe flowing into a 50 Series HD(TM) muffler with large 4.00-inch internals and a built-in resonator helping keep the interior sound down to a minimum, while still delivering a deep moderate aggressive tone outside the vehicle. The system attaches to the factory hanger locations and includes all necessary hardware for a quick and easy installation that you can do at home. Covered by our Lifetime Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16870, 39480, 49-42013
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | 67.4 | Big Horn | 345 |
- 3in. Single In. 2.25in. Dual Out. Muffler Replacement. T409
- Factory Dual Replacement.
- 3in. Dual In. 2.25 Dual Out. Muffler Replacement. High Flow. T409 Stainless Steel.
- MBRP Hi-Flow Muffler Replacement
- Product Attributes:
- Muffler Type: Performance
- Major: Performance Gas
- Exhaust Tip Quantity: 0
- Fuel Type: Gasoline
- Body Width: 5
- Minor: Direct Fit Muffler
- Body Height: 5
- Body Material: 409 Stainless Steel
- Clamps Included: Yes
- Outlet Quantity: 2
- Vehicle Segment: Truck
- Bolt-On Yes/No: Yes
- Profile: Street Profile
- Core Diameter: 3
- UPS Able: Yes
- Inlet Outside Diameter: 3
- Prop 65 (C, R or CR): Cr
- Body Diameter:
- 5
- 8.25
- Engine Fuel Type: Gasoline
- Cutting Required: No
- Hanger Included: Yes
- Outlet Outside Diameter: 2.25
- Clamping Type: Band Clamp
- Single-in Diameter: 3 Inch
- Inlet Quantity: 1
- Muffler Yes/No: Yes
- Reversible: No
- MBRP Series: Armor Plus
- Dual-out Diameter: 2.5 Inch
-
Features:
- Rugged T409 Stainless Steel Construction. Mandrel Bent Tubing. Chambered Muffler Design. High Flow. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Bed Length | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | Center | 8 Cyl 5.7L | 67.4 | Big Horn | Crew Cab Pickup | 345 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2017 - Ram 1500 | V | - | 8 Cyl 5.7L | Laramie | 345 |
- Chambered
- 16 Inch Overall Length
- MaxFlow Xtreme Muffler
- Product Attributes:
- Internal Construction: Chambered
- Outlet Position: Offset Dual
- Tip Finish: No Tip
- Case Length (IN): 10 Inch
- Includes Tip: No
- Tip Diameter (IN): No Tip
- Tip Length (IN): No Tip
- Color/ Finish: Electropolished
- Prop 65 Y/N: Y
- Tip Material: No Tip
- Inlet Position: Center Single
- Material: Stainless Steel
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- All T-304 Stainless Steel Internal Components Which Will Not Pit Or Rust From The Inside Out
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The Muffler
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme Mufflers by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust, including all internal parts. 300 series stainless steel weld filler supports the overall quality and durability of the muffler. The chambered muffler delivers a rich, aggressive tone that will turn heads and make you smile.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Ram 1500 | Lone Star |
- Black
- For Applications With Factory Dual Tailpipe Option
- Single 3 Inch Inlet
- Exhaust Muffler
- Product Attributes:
- Tip Length (IN): No Tip
- Internal Construction: Chambered
- Outlet Position: Dual
- Color/ Finish: Black
- Prop 65 Y/N: Y
- Tip Finish: No Tip
- Tip Material: No Tip
- Includes Tip: No
- Material: Stainless Steel
- Tip Diameter (IN): No Tip
-
Features:
- Heavy Gauge Steel Construction
- Deep, Rich Sound
- High Temperature Red Painted Finish
- SpeedFX offers quality 409SS black mufflers in the most popular sizes and configurations. SpeedFX muffler are fully welded and enhances the factory exhaust system with an aggressive tone. SpeedFX mufflers are great for the street or the strip and offer.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Ram 1500 | Laramie |
Showing 1 - 10 of 13 products
Loading...