1986 Ford Exhaust System Kit Parts
Image
Product
Price
- Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44(TM) Delta Flow Mufflers/OEM Style Stainless Tips;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44™ Delta Flow Mufflers/OEM Style Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Sound Level: Aggressive
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Aggressive And Powerful Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- Our American Thunder(R) exhaust system for 1987-1993 Ford Mustang LX with 5.0L engine is a bolt-on emissions legal system features free-flowing 2.50-inch aluminized steel mandrel-bent inlet pipes, aluminized steel tailpipes and uses the factory hanger locations for quick and easy installation. The kit comes with a pair of Super 44(TM) mufflers to complement that iconic deep and powerful Fox body sound. The system is then finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Comes with all necessary hardware and easy to follow instructions. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15630, 17393, 5092R4, 817213, BT9400, BX50935S, M31015
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
- Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44(TM) Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 2.5 in. Tailpipes/Super 44™ Delta Flow Mufflers/OEM Style Stainless Tips; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Inlet Diameter: 2.500 In.
- Sound Level: Aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 44 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- Our American Thunder(R) exhaust system for 1986-1993 Ford Mustang LX (Fox body) with the 5.0L engine is a bolt-on emissions legal system. Features free-flowing 2.50-inch mandrel-bent stainless steel inlet pipes flowing into a pair of Super 44(R) Series mufflers for that deep iconic sound of the 5.0L engine. The 2.50-inch mandrel-bent stainless steel tailpipes use the factory hanger locations for a quick and easy installation and the system is finished off with a pair of long 2.50-inch 304 stainless steel tips for that show car look. Includes all necessary parts, hardware and easy to follow instructions and is covered by our Lifetime Limited Warranty. Note: Fits coupes and convertibles. Also fits 1986 Ford Mustang GT models with 5.0L engine
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15630, 17213, 17393, 5092R4, BT9400, BX50935S, M31015
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | LX | 302 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 1986-1993 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 1986-1993 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15630 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- Turn Down In Front of Rear Tire Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 2.75
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1986-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 17118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L, 5.8L 1986-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Turndown In Front Of Rear Tire exit with 2.75in. Polished Clamp-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 17118 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 17118's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- Street Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1986-1993 Ford Mustang Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 1986-1993 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.0L 1986-1993 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15630 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15630 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
- Competition Series Stainless Cat-Back System
- Turn Down In Front of Rear Tire Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Competition
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1986-2004 Ford Mustang Competition Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 2.75
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1986-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L, 5.8L 1986-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Turndown In Front Of Rear Tire exit with 2.75in. Polished Clamp-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 17118 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 17118's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford Mustang | V | - | 8 Cyl 5.0L | 302 |
Showing 1 - 6 of 6 products
Loading...