Image
Product
Price
- Cat-Back Exhaust System - S-Type
- S-Type Cat-Back Exhaust System For 1986-1991 Chevrolet Corvette (C4) 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive Coupe/ Convertible (EXCEPT ZR1).
- Cat-Back Exhaust System - S-Type - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 3.000 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Single Split Rear Exit
- Title Extended: C4 Corvette 1986-1991 Cat-back Exhaust System S-type Part # 140082
- Inlet Inside Diameter: 3.000 In.
- Outlet Outside Diameter: 2.500 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 6.600 In.
- Off Road Use Only: No
- System Type: Cat Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- Borla Performance Industries Cat-Back system for the celebrated 1986-1991 C4 Corvette equipped with a 5.7L V-8 engine has been engineered to work with either the popular manual transmission or the automatic. The premium, high-quality, T-304 Austenitic stainless steel system is easy to bolt on, is a direct replacement for the much heavier (by some 20lbs.!) stock system. A 3" diameter front pipe is mounted just after the catalytic converter leading to a Y-pipe, which splits into two 2-1/2" pipes exiting on each side of the rear. The muffler and tip assemblies use a 10"x 5" diameter round muffler on each side of the vehicle, with polished T-304 stainless steel rectangular, rolled edge, angle cut tailpipe tip at each split rear exit. Tests have shown an exciting 41% increase in flow for dramatic improvement in power or fuel economy. That now famous, aggressive Borla growl and sexy look proclaim this block may be small, but it means all business we guarantee it for a Million-Miles! With race-bred technology that has been transferred from the many successful Borla race programs, it was no accident that this Borla system has won several major Corvette exhaust shootouts. Included in this great and storied past are such famous efforts as the C5-R Race Team that has dominated LeMans along with the Bondurant Corvette program at the Bob Bondurant School of High Performance Driving. Only what you would expect from Borla, the most winning exhaust in racing.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Tip Type: Welded;single Wall;angle Cut;cut Edge
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Camaro | V | - | 8 Cyl 5.0L | 305 |
- Quad Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Quad Split Rear
- Tip Type: Welded;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1989 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Single; Dual Rear Exit; Includes 3.0 in. Tailpipes/2.5 in. Flanged Cat/80 Series(TM) Crossflow Muffler/3.0 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant Only Fits Vehicles w/Single 2.5 in. Flanged Converter
- American Thunder Cat Back Exhaust System; Single; Dual Rear Exit; Includes 3.0 in. Tailpipes/2.5 in. Flanged Cat/80 Series™ Crossflow Muffler/3.0 in. Logo Embossed Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Exhaust Type: Single
- Sound Level: Moderate
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: 80 Series Crossflow
- Inlet Inside Diameter: N/a
- Exit Position: Dual Rear
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Moderate Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster Cat-back exhaust system provides. This dual out American Thunder cat-back exhaust system is the perfect choice with a 2.50-inch flanged pipe connecting directly to the catalytic converter and quickly transitioning to a full 3.00-inch mandrel-bent aluminized steel inlet tube flowing into a large case 80 Series Cross-flow performance muffler for a deep powerful sound. The system uses the factory hanger locations for an easy installation and features dual 3.00-inch mandrel-bent tailpipes exiting out the back and are finished off with dual 3.00-inch polished stainless steel tips for a muscular look and sound. American Thunder systems deliver a moderate to aggressive exterior tone with a mild-moderate interior tone and are best suited for the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Comes with our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1989 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | Iroc-Z | 350 |
- Dual; Dual Rear Exit; Includes 3.0 in./2.25 in. Rear Y-Pipe/50 Series(TM) Delta Flow Mufflers w/4 2.5 in. Stainless Tips;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Dual; Dual Rear Exit; Includes 3.0 in./2.25 in. Rear Y-Pipe/50 Series™ Delta Flow Mufflers w/4 2.5 in. Stainless Tips;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 4
- Tubing Diameter: 2.500 In.
- Exhaust Type: Dual
- Sound Level: Mild
- Inlet Diameter: 2.250 In.
- WARNING CA Proposition 65: Yes
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: 50 Series Delta Flow
- Inlet Inside Diameter: N/a
- Tail Pipe Diameter: 2.250 In.
- Exit Position: Dual Rear
- Tip Diameter: 2.500 In.
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: 9424501-l; 9424501-r
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Stock to Mild Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Connects After Factory Catalytic Converter
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- This Force II(R) system is specifically designed for 1986-1990 Chevrolet Corvette's with the 5.7L engine. The system starts at the factory ball flange at the rear of the car flowing into a Scavenger Series(R) Y-collector splitting the system into duals. The 2.50-inch mandrel-bent aluminized steel tubing flows into a pair of specially designed 60 Series(TM) Delta Flow(R) mufflers keeping the interior tone down to a minimum, with a deep mellow performance exterior tone. The system is finished off with dual 2.50-inch brushed stainless steel tips on each muffler and uses the factory hanger locations making installation a breeze. Force II systems deliver a moderate exterior tone and a mild interior tone, and are suited to customers looking for efficiency improvements without a lot of interior noise. Like all Flowmaster(R) systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1989 - Chevrolet Corvette |
Showing 1 - 5 of 5 products
Loading...