Image
Product
Price
- Includes Muffler And Tailpipe;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Muffler And Tailpipe;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1993 - Jeep Wrangler | L | - | 6 Cyl 4.0L | Sahara | 242 |
- Includes Complete Kit;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Complete Kit;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1993 - Jeep Wrangler | L | - | 4 Cyl 2.5L | Base | 150 |
- 2 in.; Includes Connecting Pipes/Mufflers/Hardware/2.5 in. Round x 7.5 in. Long Single Round Angle-Cut Intercooled Tip; Rear Exit;50 State Legal / California Emissions Compliant T-304 Stainless Steel
- S-Type Cat-Back™ Exhaust System; 2 in.; Includes Connecting Pipes/Mufflers/Hardware/2.5 in. Round x 7.5 in. Long Single Round Angle-Cut Intercooled Tip; Rear Exit;
- S-Type Cat-Back™ Exhaust System
- Product Attributes:
- Tubing Diameter: 2.000 In.
- Exhaust Type:
- Axle-back
- Single
- Muffler Type: Turbo
- WARNING CA Proposition 65: Yes
- Exit Style: Straight
- Inlet Inside Diameter: 2.000 In.
- Outlet Outside Diameter: N/a
- Tail Pipe Material: Stainless Steel
- Tail Pipe Diameter: 2.000 In.
- Exit Position: Single Rear
- Tip Diameter: 2.500 In.
- System Type: Cat Back
-
Features:
- Straight-Through Technology
- Unleash Hidden Horsepower
- Distinctive Borla Sound Of Power
- Absolute Best In Performance And Durability
- Ensure Maximum Flow And Power
- CNC Manufacturing Ensures An Accurate Fit
- Million Mile Warranty
- The BORLA(R) sound of power. Its been described as asonic shot of adrenaline. An intoxicating concert ofsteel, gears and combustion that echoes from thespeedways, deserts and highways of the world.The sound of more victory laps than any otherbrand, the BORLA(R) exhaust note has become the quintessentioal soundtrack of high-performance motoring. And like all good automotive designs there is function behing the form. As any driving enthusiast knows, the sound of an exhaust provides more than just ear candy. Its a communications conduit between car and driver. A link between human and machine. The exhaust sound provides accoustic feedback of engine rpm to aid the driver in critical decisions such as gear selection or throttle input in rev-match shifting. At BORLA(R), we understand this concept better than any exhaust manufacturer. Combining patented technology with computer modeling, extensive prototyping and advanced sound analysis tools. BORLA(R) engineers spend countless hours tuning exhaust systems to best reflect the personality and performance of vehicle applications. The result is an enhanced driving experience. With unrivaled clarity, the BORLA(R) exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensory feedback of sound. With unrivaled clarity the Borla exhaust note can help a driver stay within the powerband through a difficult section, using the exciting sensry feedback of sound.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Mazda Miata | L | 1597 | 4 Cyl 1.6L | - |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Dual Split Rear
- Tip Type: Welded;single Wall;angle Cut;cut Edge
- Inlet Connection Type: Bolt-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Pontiac Firebird | V | - | 8 Cyl 5.7L | 350 |
- Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series(TM) Big Block II Muffler;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series™ Big Block II Muffler;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 0
- Exhaust Type: Single
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: 70 Series Big Block
- Inlet Inside Diameter: N/a
- Exit Position: Single Side
- Tip Diameter: N/a
- Muffler Count: 1
- Single or Dual: Single
- System Type: Cat Back
- Muffler Part Number: 53070
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Mild Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
619656, 817135
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1993 - Ford F-150 | V | 5753 | 8 Cyl 5.8L | 96.0 | XL | 351 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Tip Finish: Polished
- Exit Style: Single Straight Passenger Side Rear
- Tip Length: 6.5
- Tip Type: Welded;single Wall;straight Cut;cut Edge
- Muffler Quantity: 2
- Subtitle: Cat-back
- Main Piping Diameter: 2.25
- Tip Diameter: 4
- Muffler Finish: Satin
- Tip Shape: Round
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1588 | 4 Cyl 1.6L | Coupe | 98 |
- Single Straight Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 2.75
- Muffler Finish: Satin
- Tip Finish: Polished
- Tip Shape: Round
- Exit Style: Single Straight Passenger Side Rear
- Tip Length: 9
- Tip Type: Welded;single Wall;turndown;cut Edge
- Inlet Connection Type: Clamp-on
- Subtitle: Cat-back
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 242 |
- Single Passenger Side Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Tip Finish: Polished
- Exit Style: Single Straight Passenger Side Rear
- Tip Length: 4.25
- Tip Type: Welded;single Wall;straight Cut;cut Edge
- Muffler Quantity: 2
- Subtitle: Cat-back
- Main Piping Diameter: 2.25
- Tip Diameter: 4
- Muffler Finish: Satin
- Tip Shape: Round
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 1993 - Honda Civic | L | 1493 | 4 Cyl 1.5L | VX | Hatchback | - |
- Includes Complete Kit;Not Legal For Sale Or Use In California
- Exhaust Kit; Includes Complete Kit;
- Exhaust Kit
- Product Attributes:
- Exhaust Type: Single
- Exit Position: Oem
- Tip Diameter: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: N/a
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1993 - Jeep Wrangler | L | - | 6 Cyl 4.0L | Renegade | 242 |
- DynoMax Exhaust System
- 2.25 in. System; Includes Super Turbo Muffler/Tail Pipe/Hardware; Aluminized Steel
- DynoMax Exhaust System
- Super Turbo Single Cat-Back System
- Product Attributes:
- Muffler Type: Turbo
- Muffler Type Included: Super Turbo
- WARNING CA Proposition 65: No
- Class: Pb
- Clamp Count: 2
- Outlet Quantity: 1
- Max Year Covered: 1997
- Most Popular Year: 1997
- Muffler Body Finish: Aluminized
- Single or Dual: Single
- Total Part VIO: 280106
- Most Popular Make/Model: Jeep Grand Cherokee
- Tubing Diameter: 2.250 In.
- Exhaust Type: Single
- Pipe Finish: Aluminized
- Exit Style: Straight
- Inlet Inside Diameter: 2.250 In.
- Outlet Outside Diameter: 2.250 In.
- Product Grade: Economy
- Bend Type: Mandrel
- Min Year Covered: 1993
- Tail Pipe Diameter: 2.250 In.
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Clamp Type: U-bolt
- Pipe Material: Steel
-
Features:
- Includes The Dynomax Super Turbo Dyno Proven Muffler
- Flows Up To 700 SCFM And Supports Up To 636 HP
- Combine State Of The Art Engineering w/Quality Material
- Provides Exceptional Strength And Durability
- Continuous Roving Fiberglass Technology
- CRF Absorbs Unwanted Interior Resonance
- Manufactured w/Precision Benders
- Fixture Checked
- Insures Every Part Fits Perfectly w/Quick And Easy Installation
- Pipe Diameter Are Increased From OEM Sizes To Improve Flow
- Pipe Diameter Are Increased From OEM Sizes To Increase Power
- Proudly Manufactured In The USA
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM). All Dynomax(R) Performance Exhaust Systems bolt on for easy installation. Your vehicle's complete exhaust can be quickly and easily customized with an emissions-legal premium performance system from Dynomax(R).
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Jeep Grand Wagoneer |
Showing 1 - 10 of 38 products
Loading...