Image
Product
Price
- Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series(TM) Big Block II Muffler;50 State Legal / California Emissions Compliant
- Force II Cat Back System; Single; Single Side Exit; Includes 3 in. Tailpipe/70 Series™ Big Block II Muffler;
- Force II Cat Back System
- Product Attributes:
- Tip Quantity: 0
- Exhaust Type: Single
- Sound Level: Mild
- WARNING CA Proposition 65: No
- Exhaust Series: Force Ii
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: 70 Series Big Block
- Inlet Inside Diameter: N/a
- Exit Position: Single Side
- Tip Diameter: N/a
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: 53070
-
Features:
- Mandrel Bent 16 Gauge Aluminized Tubing
- Mild Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- For the person who wants a subtle custom appearance with all the benefits that a Flowmaster(R) Cat-back exhaust system provides. S.O.S. (Single out side) systems are the perfect choice. Our Force II(R) systems delivers a moderate exterior tone and mild to moderate interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. This system is constructed from large 3.00-inch mandrel-bent aluminized steel tubing flowing into a 70 Series Big Block II(TM) muffler for a deep mellow tone. The 3.00-inch tailpipe uses the factory hangers for a quick and easy installation and is finished off with a turn down style tip cut into the tubing. This exit location is especially recommended for towing applications since it will not be blowing exhaust on your boat or trailer. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation. Notes: Fits 2/4 wheel drive models and all wheelbases. Covered by our 3-year Limited Warranty.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
619656, 817135
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 1996 - Ford F-150 | L | 4917 | 6 Cyl 4.9L | 81.0 | 300 |
- 4in. Turbo Back. Single Side Exit. Retains Stock Cat. AL
- Not for sale in California.
- 4in. Turbo Back. Single Side Exit. Retains Stock Catalytic Converter. Automatic Only. Aluminized Steel.
- MBRP Armor Lite 4 Inch Turbo Back Single Side Exit, 3 Inch downpipe, with Polished Tip, Utilizes Stock Catalytic Converter
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 15.75
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Bed Length | Sub Model | Body | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1996 - Ford F-250 | V | - | Automatic | 8 Cyl 7.3L | 81.0 | XLT | Extended Cab Pickup | Power-Stroke | 445 |
- Competition Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Competition
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1994-1998 Ford Mustang Competition Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- Turn Down In Front of Rear Tire Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 2.75
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1986-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System 17118 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L, 5.8L 1986-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Turndown In Front Of Rear Tire exit with 2.75in. Polished Clamp-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 17118 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 17118's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- Dual Split Rear Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1994-1998 Ford Mustang Competition Series Cat-Back Performance Exhaust System 15677 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L 1994-1998 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 15677 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 15677's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- Competition Series Stainless Cat-Back System
- Turn Down In Front of Rear Tire Exit
- Magnaflow Competition Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Competition
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 4
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1986-2004 Ford Mustang Competition Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 2.75
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Crafted from 409 stainless steel with all mandrel-bent tubing
- Increased horsepower and torque
- Aggressive exterior sound
- The MagnaFlow 1986-2004 Ford Mustang Competition Series Cat-Back Performance Exhaust System brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This exhaust kit is designed to enhance your 4.6L, 5.0L, 5.8L 1986-2004 Ford Mustang with dyno-proven performance made possible thanks to fast-flowing mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Turndown In Front Of Rear Tire exit with 2.75in. Polished Clamp-On Single Wall Turndown Cut Edge tips featuring a sporty finish. The exhaust system's cat-back layout replaces your ride's exhaust system from near the catalytic converter on back. Exhaust system 17118 is engineered to make your vehicle's engine produce Aggressive exterior and Moderate interior sound levels, befitting its competition-oriented design. 17118's direct-fit design makes installation a breeze thanks to the use of advanced 3D scanning techniques. This performance exhaust system is made of 100% durable and corrosion-resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- Street Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 16
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1994-1998 Ford Mustang Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 1994-1998 Ford Mustang Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.6L, 5.0L 1994-1998 Ford Mustang with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Cut Edge tips, this Ford Mustang exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Ford Mustang's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15638 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1996 - Ford Mustang | V | - | 8 Cyl 4.6L | 281 |
- 4in. Turbo Back. Single Side Exit. Retains Stock Cat. T409
- Not for sale in California.
- 4in. Turbo Back. Single Side Exit. Retains Stock Catalytic Converter. Automatic Only. T409 Stainless Steel.
- MBRP Armor Plus 4 Inch Turbo Back Single Side Exit, 3 Inch downpipe, with Polished Tip, Utilizes Stock Catalytic Converter
- Product Attributes:
- Exhaust Tip Wall: Single
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 15.75
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Plus
- Exhaust Tip Diameter: 5
- Pipe Material: T409 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Bed Length | Sub Model | Body | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1996 - Ford F-250 | V | - | Automatic | 8 Cyl 7.3L | 81.0 | XL | Extended Cab Pickup | Power-Stroke | 445 |
- 4in. Turbo Back. Single Side Exit. Retains Stock Cat. AL
- Not for sale in California.
- 4in. Turbo Back. Single Side Exit. Retains Stock Catalytic Converter. Automatic Only. Aluminized Steel.
- MBRP Armor Lite 4 Inch Turbo Back Single Side Exit, 3 Inch downpipe, No Tip, Utilizes Stock Catalytic Converter
- Product Attributes:
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Muffler Quantity: 1
- Muffler Body Length: 15.75
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Profile: Street Profile
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: No Tip
- MBRP Series: Armor Lite
- Pipe Material: Aluminized Steel
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Seams for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Bed Length | Sub Model | Body | Engine Version | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1996 - Ford F-250 | V | - | Automatic | 8 Cyl 7.3L | 96.0 | XL | Extended Cab Pickup | Power-Stroke | 445 |
Showing 1 - 10 of 10 products
Loading...