Image
Product
Price
- Includes Muffler And Tailpipe; w/Flange;Not Legal For Sale Or Use In California Built On Or After 1-24-2000
- Exhaust Kit; Includes Muffler And Tailpipe; w/Flange;
- Exhaust Kit
- Product Attributes:
- Exit Position: Oem
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
- Exit Style: Turn Out
-
Features:
- Exhaust Kit
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2000 - Jeep Wrangler | L | - | 6 Cyl 4.0L | Sahara | 242 |
- Cat-Back Exhaust System - S-Type Classic
- S-Type Classic Cat-Back Exhaust System For 1997-2004 Chevrolet Corvette (C5/ C5 Z06) 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive Coupe/ Convertible.
- Cat-Back Exhaust System - S-Type Classic - Dual Round Tips - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: C5 Corvette/ C5 Corvette Z06 1997-2004 Cat-back Exhaust System S-type Classic Part # 140038
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.000 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- System Type: Cat Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- System features the S-Type Classic sound and 4" round polished T-304 stainless steel tips.. BORLA Performance has once again proven why we've have led the aftermarket performance exhaust industry for over 40 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA's knowledge of both the vehicle dynamics and the power-plant engineering. The C5 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C5, and C5 Z06 play right into that wheelhouse. With an experienced R&D staff, the BORLA team has given the C5 the attention it deserves by rolling out several systems for the Corvette. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. BORLA offers a variety of options for the C5, and C5 Z06. Choose from several tip styles and muffler designs. BORLA Performance Industries, the original pioneers of premium, high quality T-304 austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy - all with an easy bolt-on installation. Best of all, BORLA street products carry an unsurpassed written million-mile warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Cat-Back Exhaust System - S-Type
- S-Type Cat-Back Exhaust System For 1998-2002 Chevrolet Camaro SS/ Camaro Z28/ Pontiac Firebird/ Trans-Am 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
- Cat-Back Exhaust System - S-Type - Dual Square Tips - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 3.000 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: Camaro Ss/ Camaro Z/28/ Trans-am/ Firebird/ Formula Firebird 1998-2002 Cat-back Exhaust System S-type Part # 14780
- Inlet Inside Diameter: 3.000 In.
- Outlet Outside Diameter: 3.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 3.000 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 3.800 In.
- Off Road Use Only: No
- System Type: Cat Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- This Borla system is unique in the industry with an adjustable sound level. By changing the block off plates you can adjust the SPL (Sound Pressure Level) to your taste. System features polished T-304 stainless steel tips. Borla Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Camaro | V | - | 8 Cyl 5.7L | 350 |
- Cat-Back Exhaust System - S-Type Classic
- S-Type Classic Cat-Back Exhaust System For 1997-2004 Chevrolet Corvette (C5/ C5 Z06) 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive Coupe/ Convertible.
- Cat-Back Exhaust System - S-Type Classic - Dual Oval Tips - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: C5 Corvette/ C5 Corvette Z06 1997-2004 Cat-back Exhaust System S-type Classic Part # 140039
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4.250 In.
- Off Road Use Only: No
- System Type: Cat Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- S-Type Classic sound. Borla Performance has once again proven why we've have led the aftermarket performance exhaust industry for over 40 years. Borla has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced Borla's knowledge of both the vehicle dynamics and the power-plant engineering. The C5 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. Borla has always used the transfer of technology from racing to the street as a tool, and the C5, and C5 Z06 play right into that wheelhouse. With an experienced R&D staff, the Borla team has given the C5 the attention it deserves by rolling out several new systems for the Corvette. Airflow management and exhaust engineering is a science with which Borla has more experience than anyone in the exhaust aftermarket. Borla offers a variety of options for the C5, and C5 Z06. Choose from several tip styles and muffler designs. Cat-Back and Axle-Backs are available with either the highly popular S-Type muffler or the Touring muffler. The S-Type has a more aggressive sound. For those who prefer it on the milder side, we have the Touring muffler with a less aggressive sound. Both sound level system options feature polished T-304 stainless steel tips. Borla Performance Industries, the original pioneers of premium, high quality T-304 austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. Best of all, Borla street products carry an unsurpassed written million-mile warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- Cat-Back Exhaust System - S-Type Classic
- S-Type Classic Cat-Back Exhaust System For 1997-2004 Chevrolet Corvette (C5/ C5 Z06) 5.7L V8 Automatic/ Manual Transmission Rear Wheel Drive Coupe/ Convertible.
- Cat-Back Exhaust System - S-Type Classic - Single Round Tips- Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Cat-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Center Rear Exit
- Title Extended: C5 Corvette/ C5 Corvette Z06 1997-2004 Cat-back Exhaust System S-type Classic Part # 140017
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4.500 In.
- Off Road Use Only: No
- System Type: Cat Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- System features S-Type Classic sound and polished T-304 stainless steel tips. Borla Performance has created quite a buzz with Vette owners! This incredibly popular 2-tip Cat-Back (PN140017 - dubbed the Stinger on the Internet) features "S-Type" mufflers, giving a more aggressive sound. Borla offers a variety of options for the C5, and C5 Z06. Choose from several tip styles and muffler designs. Cat-Back and Axle-Backs are available with either the highly popular S-Type muffler or the Touring muffler. The S-Type is a more aggressive sound. For those who prefer it on the milder side, we have the Touring muffler with a less aggressive sound. Across the country engine builders, Corvette shops and enthusiasts have proclaimed the S-Type by Borla as the system no one can beat. Borla has once again set the pace in the Corvette performance exhaust world. Others only wish they were genuine Borla. The horsepower is incredible, but the Borla growl similar to a NASCAR backing off for a hard turn at Daytona is the part that puts a smile on everyone's face. It just says POWER. Make no mistake -- this is an aggressive exhaust system. Borla the original pioneers of premium, high quality T-304 austenitic stainless steel (superior to 400 series and aluminized steel) free flow exhaust utilizes its patented, award and race winning technology to deliver quality, durability, sound, performance gains and enhanced fuel economy. All Borla street products are assembled in the USA and carry the famous Borla written Million-Mile Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Chevrolet Corvette | V | - | 8 Cyl 5.7L | 350 |
- 4in. Turbo Back
- Made On Or After June 1998~Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single-No Muffler. T409 Stainless Steel.
- MBRP Armor Plus Turbo Back 4 Inch Single Side Exit , No Tip or Muffler
- Product Attributes:
- Muffler Type: No Muffler
- Tail Pipe Quantity: 1
- Exhaust Tip Quantity: 0
- Minor: Single
- Restrictions: Not For Use On Vehicles Equipped With A Catalytic Converter
- Tail Pipe Outlet Outside Diameter: 4
- Muffler Quantity: 0
- Clamps Included: Yes
- Vehicle Segment: Truck
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Exhaust Tip Intercooled: No
- Valve Included: No
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Muffler Yes/No: No
- Tip Shape: No Tip
- MBRP Series: Armor Plus
- Pipe Material: T409 Stainless Steel
-
Features:
- Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
- RELIABILITY AND DURABILITY - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed with a 5-Year Warranty on Part Numbers ending in SLM. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 96.0 | Standard Cab Pickup | 359 |
- Overland Series Stainless Cat-Back System
- Single Passenger Side Rear Exit
- Magnaflow Overland Series Stainless Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through;tuned Chamber
- Muffler Type Position Left: Straight-through
- Exhaust Tip Quantity: 0
- Muffler Body Length Position Left: 18
- Muffler Body Height Position Right: 4
- Muffler Quantity: 2
- Clamps Included: Yes
- Muffler (Left) Body Height: 5
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Muffler (Right) Body Length: 14
- Series: Overland
- Hangers Included: Yes
- Muffler (Left) Type: Straight-through
- Exit Style: Single Passenger Side Rear
- Muffler Body Width Position Right: 4
- Muffler Body Length Position Right: 14
- Main Piping Diameter: 2.5
- Muffler Type Position Right: Tuned Chamber
- Clamping Type: Band Clamp
- Gasket Or Seal Included: Yes
- Muffler Body Height Position Left: 5
- Muffler (Right) Body Height: 4
- Muffler (Right) Body Width: 4
- Prop 65 Y/N: No
- Muffler (Right) Type: Tuned Chamber
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 1996-2002 Toyota 4runner Overland Series Cat-back Performance Exhaust System
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Muffler (Left) Body Length: 18
-
Features:
- No-Drone-Technology (NDT) allows for a quiet cabin
- Dyno proven performance
- High clearance exit
- The MagnaFlow Toyota 4Runner Overland Series Cat-Back Performance Exhaust System #19538 empowers your 1996-2002 Toyota 4Runner overland rig with MagnaFlow’s deep signature exhaust note and dyno-proven performance. MagnaFlow #19538 has been weight optimized and designed to provide improved ground clearance thanks to its undercarriage-hugging, mandrel bent 2.5” main piping paired with a no-tip, high-clearance passenger side exit. These features improve ground clearance, departure angles and overall utility. MagnaFlow exhaust kit #19538 was developed to be compatible with the most common bolt-on aftermarket modifications. The single straight-through muffler is augmented by a quarter-wave NDT resonator, which utilizes MagnaFlow’s No Drone Technology to cancel out the undesirable frequencies of your Toyota 4Runner. This feature preserves the character of your motor’s exhaust while allowing for long distance highway cruising to overland destinations without dealing with tiresome interior droning noises. Exhaust system #19538 was produced using CNC precision robotic manufacturing, enabling precise fitment and easy, bolt-on installation. The entire exhaust kit features durable, 100% stainless steel construction and is covered by MagnaFlow’s limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2000 - Toyota 4Runner | V | 3378 | 6 Cyl 3.4L | - |
- 2.5in. Cat-Back. Single Side Exit. AL
- 2.5in. Cat-Back. Single Side Exit. Aluminized Steel.
- Armor Lite Cat Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: No
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Yes
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 3.5
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Manuf. Body Code | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2000 - Jeep TJ | L | - | 6 Cyl 4.0L | TJ | Sport | 242 |
- 2.5in. Cat-Back. Single Side. BLK.
- 2.5in. Cat-Back. Single Side. Black Coated Aluminized Steel.
- Armor BLK Cat Back Exhaust System
- Product Attributes:
- Exhaust Tip Wall: Single
- Major: Performance Gas
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Rolled End
- Exhaust Tip Quantity: 1
- Fuel Type: Gasoline
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: No
- Profile: Street Profile
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Cutting Required: Yes
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Spring Bolt Kit Included: No
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Blk
- Exhaust Tip Diameter: 3.5
- Pipe Material: Black-coated Aluminized Steel
- Exhaust Tip Finish: Black-coated
-
Features:
- Black Coated. Fully Sealed Seams for Rust Resistance. MBRP Signature Styling and Sound.
- STYLE THAT'S WORTH A SECOND LOOK - ARMOR BLK Series exhaust systems crank your vehicle’s style dial to 11. The ARMOR BLK series offers the same performance as the other series with an engineered, high-heat black powder coating on the tailpipe(s) and tip(s). Manufactured using heavy-gauge Aluminized Steel tubing throughout the whole system, everything but the tailpipe and tip are left as mill-finish steel for better resistance of damage under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. The black powder coating features a 1-year warranty against factory defects, and the remaining parts feature an industry leading 3-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Manuf. Body Code | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2000 - Jeep Wrangler | L | - | 6 Cyl 4.0L | TJ | Sport | 242 |
- 4in. Turbo Back. Single Side Exit. T304
- Made On Or After June 1998~Not For Use In Vehicles Equipped With Catalytic Converter
- 4in. Turbo Back. Single Side Exit. T304 Stainless Steel.
- MBRP Armor Pro Turbo Back 4 Inch Single Side Exit with Polished Tip
- Product Attributes:
- Exhaust Tip Wall: Dual
- Tail Pipe Quantity: 1
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 1
- Muffler Flanged Inlet: No
- Minor: Single
- Tail Pipe Outlet Outside Diameter: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Outlet Quantity: 1
- Clamps Included: Yes
- Vehicle Segment: Truck
- Muffler Flanged Outlet: No
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 6
- Exhaust Tip Intercooled: No
- Muffler Finish: Polished
- Muffler Outlet Connection: Slip-fit
- UPS Able: Yes
- Muffler Inlet Connection: Slip-fit
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 4 Inch
- Exhaust Tip Cut: Straight
- Exhaust Tip Connection: Slip-on
- Hangers Included: Yes
- Exit Style:
- Single Side
- Single Side Exit
- Muffler Body Width: 6
- Cutting Required: Cutting May Be Required
- Main Piping Diameter: 4
- Clamping Type: Round Band
- Exhaust Tip Resonated: No
- Muffler Yes/No: Yes
- Exhaust Tip Shape: Round
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 5
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Easy to Clean and Maintain. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2000 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 96.0 | Standard Cab Pickup | 359 |
Showing 1 - 10 of 152 products
Loading...