Image
Product
Price
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Tip Length: 18
- Tip Type: Clamp-on;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Single; Dual Rear Same Side Exit; Includes 2.5 in. Tailpipes/Super 40 Series(TM) Mufflers/3 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Single; Dual Rear Same Side Exit; Includes 2.5 in. Tailpipes/Super 40 Series™ Mufflers/3 in. Logo Embossed Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16ga Aluminized Tubing
- Moderate Exterior Exhaust Tone
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- This Flowmaster American Thunder(R) cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster(R). This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent aluminized steel tubing flowing into a specially designed Super 40(TM) Series performance muffler with dual 2.50-inch aluminized steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all stainless steel construction with a Lifetime Limited Warranty, check out exhaust system #817417. Note: Fits 2/4 wheel drive models all wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16520, 69523, 817417
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 67.0 | 330 |
- Single; Dual Rear Same Side Exit; Includes 2.5in. Outlets/Super 40 Series(TM) Muffler/3in. Logo Embossed Stainless Tips; 409 Stainless Steel;50 State Legal / California Emissions Compliant
- American Thunder Cat Back Exhaust System; Single; Dual Rear Same Side Exit; Includes 2.5in. Outlets/Super 40 Series™ Muffler/3in. Logo Embossed Stainless Tips; 409 Stainless Steel;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Tubing Diameter: 2.500 In.
- Exhaust Type: Single
- Sound Level: Moderate
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Inlet Inside Diameter: N/a
- Outlet Outside Diameter: 2.500 In.
- Tail Pipe Diameter: 2.500 In.
- Exit Position: Dual Rear Same Side
- Muffler Count: 1
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16ga 409S Stainless Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- This Flowmaster American Thunder(R) cat-back exhaust system for the 2004-2008 Ford F-150 and Lincoln Mark LT trucks with the 4.6L or 5.4L engines, is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster(R). This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent stainless steel tubing flowing into a specially designed Super 40(TM) Series performance muffler with dual 2.50-inch stainless steel tailpipes which use the factory hanger locations for an easy installation. The tailpipes exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all aluminized steel construction with a 3-year Limited Warranty, check out exhaust system #17417. Note: Fits 2/4 wheel drive models all wheelbases.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16520, 16523, 16615, 16616, 17417, 69523
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | CID |
|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 67.0 | 330 |
- Dual Same Side Before Passenger Rear Tire Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Same Side Before Passenger Rear Tire
- Tip Length: 14.75
- Tip Type: Welded;single Wall;angle Cut;cut Edge
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Off Road Pro Series Gas Stainless Cat-Back
- Turn Down In Front of Rear Tire Exit
- Magnaflow Off Road Pro Series Gas Stainless Cat-Back
- Off-Road Pro Series Gas Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 1
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 14
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 11
- Exhaust Tip Intercooled: No
- Muffler Finish: Satin
- Valve Included: No
- Inlet Type: Clamp-on
- Exhaust Tip Cut: Turndown
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Turndown In Front Of Rear Tire
- Muffler Body Width: 5
- Mounting Bracket Included: No
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Satin
-
Features:
- Available for gas or diesel trucks and SUV's
- 100% Stainless Steel
- High flow straight through design
- The MagnaFlow Off-Road Pro Series Cat-Back Performance Exhaust System 17107 brings additional off-roading prowess and our deep signature exhaust note to your Truck with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17107 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Truck exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17107's emissions-legal cat-back design replaces all your truck's exhaust components from the catalytic converter on back with its 3in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17107 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 67.0 | Crew Cab Pickup | 330 |
- Off Road Pro Series Gas Stainless Cat-Back
- Turn Down In Front Of Rear Tire Exit
- Off Road Pro Series Gas Stainless Cat-Back
- Off-Road Pro Series Gas Stainless Cat-Back
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3
- Muffler Finish: Satin
- Tip Finish: Satin
- Exit Style: Turndown In Front Of Rear Tire
- Tip Length: 11
- Tip Type: Clamp-on;single Wall;turndown;cut Edge
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 67.0 | Crew Cab Pickup | 330 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 4
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 3
- Clamps Included: Yes
- Muffler (Rear) Body Width: 9
- Exhaust Tip Length: 7
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Inlet Type: Clamp-on
- Muffler (Front) Body Width: 4
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Mounting Bracket Included: No
- Main Piping Diameter: 2.25
- Clamping Type: Band Clamp;u-bolt Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16675 brings out the personality of your Car with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Car exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Car's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16675 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16675 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2006 - Lincoln Zephyr | V | 2968 | 6 Cyl 3.0L | FWD | 181 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 18
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Inlet Type: Clamp-on
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 8
- Mounting Bracket Included: No
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16520 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16520 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16520 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Dual Same Side Before Passenger Rear Tire Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Cut Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 14.75
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Inlet Type: Bolt-on
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Same Side Before Passenger Rear Tire
- Muffler Body Width: 8
- Mounting Bracket Included: No
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16522 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16522 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16522 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | 8 Cyl 5.4L | 330 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.25
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Tip Length: 7
- Tip Type: Welded;double Wall;angle Cut;folded Edge
- Muffler Quantity: 3
- Inlet Connection Type: Clamp-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2006 - Lincoln Zephyr | V | 2968 | 6 Cyl 3.0L | FWD | 181 |
Showing 1 - 10 of 11 products
Loading...