2008 Chevrolet Exhaust System Kit Parts
Choose a Model for your 2008 Chevrolet
Image
Product
Price
- Axle-Back
- Dual Rear Exit; 2.5 in.; Includes Mufflers/Pipes/Clamps/Dual 4.5 in. Black PVD Pro Series Tips
- 2.5in. Axle-Back Dual Rear Exit with Twin 4.5in. Black PVD Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Dual Rear
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Flows 35 Percent Better Than Stock
- Dual Walled Black PVD Stainless Steel Tips
- Kit Replaces PN 14959
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- 3 Inch Inlet Diameter
- 3-1/2 Inch Diameter Black Powder Coated 304 Stainless Steel Tips
- MaxFlow Xtreme Cat Back System
- Product Attributes:
- Exhaust Tip Style: 3-1/2 Inch Round
- Includes Exhaust Pipe Muffler Delete: No
- Exhaust Type: Single
- Required Welding: No
- Sound Level: Aggressive
- Includes Hardware: Yes
- Diameter (IN): 2-1/2 Inch
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Configuration: Single Inlet, Dual Outlet
- Exit Position: Rear/ Side Exit
- Prop 65 Y/N: Y
- Includes Muffler: Yes
- Includes Exhaust Tip: Yes
- Type: Cat Back
- Material: Stainless Steel
- Muffler Brand: Maxflow Xtreme
- Outlet Type: Dual
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- Smooth Mandrel Bent Angles Ensure Maximum Air Flow For The Very Best Sound And Performance
- CNC Manufacturing To Exacting Tolerances Creates Precise Fitment That Reduces Installation Time
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The System
- Optional Dual Side Or Dual Rear Exits On Applicable Systems Provides Optional System Set Up
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme exhaust systems by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust. 300 series stainless steel weld filler supports the overall quality and durability of the system. Smooth mandrel bend angle ensure maximum air flow for the very best sound and performance. CNC manufacturing creates precise fitment and reduces installation times. The MaxFlow Xtreme muffler provides a rich, aggressive tone that will turn heads and make you smile. Dual side or dual rear exit options are included on applicable systems. MaxFlow Xtreme exhaust systems are covered by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Bed Length | Body |
|---|---|---|
| 2008 - Chevrolet Silverado 1500 | 78.7 | Extended Cab Pickup |
- Axle-Back
- Dual Rear Exit; 2.5 in.; Includes Mufflers/Pipes/Clamps/Dual 4.5 in. Black PVD Pro Series Tips
- 2.5in. Axle-Back Dual Rear Exit with Twin 4.5in. Black PVD Pro-Series Tips
- Xtreme Axle-Back Exhaust System
- Product Attributes:
- Tail Pipe Diameter: 2.500 In.
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back
- Exit Position: Dual Rear
- Tip Diameter: 4.500 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
- Inlet Inside Diameter: 2.500 In.
-
Features:
- Patented No Drone Reflective Sound Cancellation RSC Technology
- Custom Tuned - Aggressive Exhaust Note
- No Drone At Cruise
- 304 Stainless Steel Construction
- Flows 35 Percent Better Than Stock
- Dual Walled Black PVD Stainless Steel Tips
- Kit Replaces PN 14959
- Easy Bolt-On Installation
- Detailed Printed Instructions Includes Full-Color Available Online
- No Welding Required
- Limited Lifetime Warranty
- Made in the U.S.A.
- CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- Axle-Back Exhaust System - S-Type
- S-Type Axle-Back Exhaust System For 2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible. Borla System Does Not Contain NPP Valves.
- Axle-Back Exhaust System - S-Type - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: Borla Cat-back Exhaust System - S-type
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
- S-Type Classic sound. This system will fit vehicles with and without NPP. Borla system does NOT include NPP valves. Features polished T-304 stainless steel tips. Borla Performance has once again proven why we have led the aftermarket performance exhaust industry for over 40 years. Borla has an exalted heritage with Chevrolet performance vehicles. From the C5R Le Mans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced Borla's knowledge of both the vehicle dynamics and the power-plant engineering. The C6 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. Borla has always used the transfer of technology from racing to the street as a tool, and the C6 and C6 Z06 play right into that wheelhouse. With an experienced R&D staff, the Borla team has given the C6 the attention it deserves by rolling out several systems for the Corvette. Airflow management and exhaust engineering is a science with which Borla has more experience than anyone in the exhaust aftermarket. Borla offers a variety of options for the C6, and C6 Z06. Choose from several tip styles and muffler designs. Cat-Back and Axle-Backs are available with either the highly popular S-Type muffler or the Touring muffler. The S-Type has a more aggressive sound. For those who prefer it on the milder side, we have the Touring muffler with a less aggressive sound. Some come with an assortment of tip designs. Borla Performance Industries, the original pioneers of premium, high-quality T-304 austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy all with an easy bolt-on installation. All Borla street products carry an unsurpassed written Million-Mile warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- Axle-Back Exhaust System - ATAK
- ATAK Axle-Back Exhaust System 2006-2013 Chevrolet Corvette (C6) Z06/ ZR1 7.0L/ 6.2L V8 Manual Transmission ONLY Rear Wheel Drive 2 Door Coupe.
- Axle-Back Exhaust System - ATAK - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 3.000 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: C6 Corvette Z06/ C6 Corvette Zr1 2006-2013 Axle-back Exhaust System Atak Part # 11822
- Inlet Inside Diameter: 3.000 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 3.000 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Dual Split Rear
- Tip Diameter: 4.250 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- Fits Manual Transmission ONLY
- System will fit vehicles with and without NPP
- BORLA system does NOT include NPP valves
- See below for additional Product Features & Benefits
- This system will fit vehicles with and without NPP. BORLA system does NOT include NPP valves. System features 4.25" polished T-304 stainless steel tips. ATAK, Acoustically-Tuned Applied Kinetics, technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. This is our most aggressive sound. Even though the sound on the exterior is uncompromising, the sound in the cabin is devoid of harsh resonance, a product of painstaking engineering and over 40 years of experience. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 7011 | 8 Cyl 7.0L | Z06 | 427 |
- Axle-Back Exhaust System - ATAK
- 2006-2013 Chevrolet Corvette Z06 (C6) 7.0L V8/ Corvette ZR1 (C6) 6.2L V8 Manual Transmission ONLY Rear Wheel Drive 2 Door Coupe. Will Fit Vehicles With And Without NPP. BORLA System Does Not Contain NPP Valves.
- Axle-Back Exhaust System - ATAK - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: C6 Corvette 2005-2008 Axle-back Exhaust System Atak Part # 11816
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.000 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Split Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- System will fit vehicles with and without NPP
- BORLA system does NOT include NPP valves
- This system will fit vehicles with and without NPP. BORLA system does NOT include NPP valves. System features 4" polished T-304 stainless steel tips. ATAK, Acoustically-Tuned Applied Kinetics, technology is based on specifically-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. This is our most aggressive sound. Even though the sound on the exterior is uncompromising, the sound in the cabin is devoid of harsh resonance, a product of painstaking engineering and over 40 years of experience. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- Axle-Back Exhaust System - S-Type ll
- S-Type II Axle-Back Exhaust System 2005-2008 Chevrolet Corvette (C6) 6.0L/ 6.2L V8 Automatic/ Manual Transmission Rear Wheel Drive 2 Door Coupe/ Convertible.
- Axle-Back Exhaust System - S-Type ll - Polished Stainless Steel Tip
- Product Attributes:
- Tip / Outlet Finish: Polished T-304 Stainless Steel
- Tubing Diameter: 2.500 In.
- Exhaust Type: Axle-back System
- Muffler Type: Straight-through
- Grade Type: Performance
- Exit Style: Dual Split Rear Exit
- Title Extended: C6 Corvette 2005-2008 Axle-back Exhaust System S-type Ii Part # 11815
- Inlet Inside Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Prop 65 - Long Label: Warning: This Product In The Physical Form It Is Sold Does Not Present A Hazard. However, Operations Including, But Not Limited To Welding, Brazing, Or Thermal Cutting Can Expose You To Chemicals Including Chromium, Nickel, Cobalt, Arsenic, Cadmium And Le
- Tail Pipe Diameter: 2.500 In.
- Tail Pipe Material: Stainless Steel
- Exit Position: Dual Rear
- Tip Diameter: 4 In.
- Off Road Use Only: No
- System Type: Axle Back
- Construction: All Welded
- Prop 65 (C, R or CR): Cr
-
Features:
- BORLA system does NOT include NPP valves
- S-Type II sound level
- System will fit vehicles with and without NPP
- See below for additional Product Features & Benefits
- The S-Type II systems use the latest muffler design to eliminate sound frequencies are often associated with resonance or drone. This system will fit vehicles with and without NPP. BORLA system does NOT include NPP valves. System features 4" polished T-304 stainless steel tips. BORLA Cat-Back & Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium, high-quality T-304 austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Corvette | V | 6162 | 8 Cyl 6.2L | Base | 376 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 3
- Muffler Type: Straight-through
- Tip Diameter: 3.5
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Tip Length: 18
- Tip Type: Clamp-on;single Wall;angle Cut;rolled Edge
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2008 - Chevrolet Silverado 1500 | V | 5328 | 8 Cyl 5.3L | 78.7 | Extended Cab Pickup | 325 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Single Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 18
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Inlet Type: Bolt-on
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Clamp-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 8
- Mounting Bracket Included: No
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3.5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16741 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck's to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16741 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16741 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2008 - Chevrolet Silverado 1500 | V | - | 8 Cyl 4.8L | 78.7 | Extended Cab Pickup | 294 |
- Dual Split Rear Exit
- Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Main Piping Diameter: 2.5
- Muffler Type: Straight-through
- Tip Diameter: 4
- Muffler Finish: Satin
- Exit Style: Dual Split Rear
- Tip Length: 7.25
- Tip Type: Welded;double Wall;angle Cut;rolled Edge;resonated
- Muffler Quantity: 3
- Inlet Connection Type: Bolt-on
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Chevrolet Impala | V | 5328 | 8 Cyl 5.3L | SS | 325 |
Showing 1 - 10 of 47 products
Loading...