Image
Product
Price
- 3 Inch Inlet Diameter
- 3-1/2 Inch Diameter Black Powder Coated 304 Stainless Steel Tips
- MaxFlow Xtreme Cat Back System
- Product Attributes:
- Exhaust Tip Style: 3-1/2 Inch Round
- Includes Exhaust Pipe Muffler Delete: No
- Exhaust Type: Single
- Required Welding: No
- Sound Level: Aggressive
- Includes Hardware: Yes
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Configuration: Single Inlet, Dual Outlet
- Exit Position: Rear/ Side Exit
- Prop 65 Y/N: Y
- Includes Muffler: Yes
- Includes Exhaust Tip: Yes
- Type: Cat Back
- Material: Stainless Steel
- Muffler Brand: Maxflow Xtreme
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- Smooth Mandrel Bent Angles Ensure Maximum Air Flow For The Very Best Sound And Performance
- CNC Manufacturing To Exacting Tolerances Creates Precise Fitment That Reduces Installation Time
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The System
- Optional Dual Side Or Dual Rear Exits On Applicable Systems Provides Optional System Set Up
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme exhaust systems by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust. 300 series stainless steel weld filler supports the overall quality and durability of the system. Smooth mandrel bend angle ensure maximum air flow for the very best sound and performance. CNC manufacturing creates precise fitment and reduces installation times. The MaxFlow Xtreme muffler provides a rich, aggressive tone that will turn heads and make you smile. Dual side or dual rear exit options are included on applicable systems. MaxFlow Xtreme exhaust systems are covered by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Bed Length | Body |
|---|---|---|
| 2009 - Chevrolet Silverado 1500 | 69.3 | Extended Cab Pickup |
- 3 Inch Pipe
- Single Exhaust With Single Exit
- MaxFlow Xtreme Cat Back System
- Product Attributes:
- Exhaust Tip Style: No Tip
- Includes Exhaust Pipe Muffler Delete: No
- Exhaust Type: Single
- Required Welding: No
- Sound Level: Aggressive
- Includes Hardware: Yes
- Exhaust Tip Material: No Tip
- Muffler Quantity: 1
- Muffler Configuration: Single Inlet, Single Outlet
- Exit Position: Over Axle
- Prop 65 Y/N: Y
- Includes Muffler: Yes
- Includes Exhaust Tip: No
- Type: Cat Back
- Material: Stainless Steel
- Muffler Brand: Maxflow Xtreme
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- Smooth Mandrel Bent Angles Ensure Maximum Air Flow For The Very Best Sound And Performance
- CNC Manufacturing To Exacting Tolerances Creates Precise Fitment That Reduces Installation Time
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The System
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme exhaust systems by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust. 300 series stainless steel weld filler supports the overall quality and durability of the system. Smooth mandrel bend angle ensure maximum air flow for the very best sound and performance. CNC manufacturing creates precise fitment and reduces installation times. The MaxFlow Xtreme muffler provides a rich, aggressive tone that will turn heads and make you smile. Dual side or dual rear exit options are included on applicable systems. MaxFlow Xtreme exhaust systems are covered by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Bed Length | Sub Model | Body |
|---|---|---|---|
| 2009 - Ford F-150 | 97.4 | XLT | Crew Cab Pickup |
- 2-1/2 Inch Inlet Diameter
- 4 Inch Diameter Black Powder Coated 304 Stainless Steel Tips
- MaxFlow Xtreme Cat Back System
- Product Attributes:
- Exhaust Tip Style: 4 Inch Round
- Includes Exhaust Pipe Muffler Delete: No
- Exhaust Type: Dual
- Required Welding: No
- Sound Level: Aggressive
- Includes Hardware: Yes
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Configuration: Dual Inlet, Dual Outlet
- Exit Position: Rear/ Side Exit
- Prop 65 Y/N: Y
- Includes Muffler: Yes
- Includes Exhaust Tip: Yes
- Type: Cat Back
- Material: Stainless Steel
- Muffler Brand: Maxflow Xtreme
-
Features:
- Built From Premium T-304 Austenitic Stainless Steel Which Will Not Pit Or Rust
- Smooth Mandrel Bent Angles Ensure Maximum Air Flow For The Very Best Sound And Performance
- CNC Manufacturing To Exacting Tolerances Creates Precise Fitment That Reduces Installation Time
- 300 Series Stainless Steel Weld Filler Supports The Overall Quality And Durability Of The System
- Optional Dual Side Or Dual Rear Exits On Applicable Systems Provides Optional System Set Up
- Rich, Aggressive Tone From The MaxFlow Xtreme Muffler Adds A Powerful Sound To The Vehicle
- MaxFlow Xtreme exhaust systems by SpeedFX are built using T-304 austenitic stainless steel which will not pit or rust. 300 series stainless steel weld filler supports the overall quality and durability of the system. Smooth mandrel bend angle ensure maximum air flow for the very best sound and performance. CNC manufacturing creates precise fitment and reduces installation times. The MaxFlow Xtreme muffler provides a rich, aggressive tone that will turn heads and make you smile. Dual side or dual rear exit options are included on applicable systems. MaxFlow Xtreme exhaust systems are covered by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Bed Length | Body |
|---|---|---|
| 2009 - Toyota Tundra | 97.6 | Standard Cab Pickup |
- Street Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Muffler Body Length Position Front: 18
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 4
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 3
- Clamps Included: Yes
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 4
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 11
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 18
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 11
- Title: Magnaflow 2006-2010 Dodge Charger Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Muffler Body Height Position Front: 4
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2006-2010 Dodge Charger Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L, 3.5L 2006-2010 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16936 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16936 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Dodge Charger | V | 2736 | 6 Cyl 2.7L | 167 |
- Dual Split Rear Exit For Vehicles with Factory Dual Exhaust
- Magnaflow Street Series Black Cat-Back System
- Street Series Black Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Clamps Included: Yes
- Muffler Body Height: 5
- Exhaust Tip Length: 13
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Muffler Body Width: 11
- Main Piping Diameter: 3
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 5
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Black Coated
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2009 - Dodge Ram 1500 | V | - | 8 Cyl 5.7L | 96.3 | Standard Cab Pickup | 345 |
- Quad Split Rear Exit
- Magnaflow Street Series Stainless Axle-Back System
- Street Series Stainless Axle-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: No
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Quad Split Rear
- Main Piping Diameter: 2.5
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2008-2009 Pontiac G8 Street Series Axle-Back Performance Exhaust System 16883 brings enhanced engine sound and dyno-proven performance to your 6.0L, 6.2L 2008-2009 Pontiac G8 with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Pontiac G8 exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Pontiac G8's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16883 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Pontiac G8 | V | 6162 | 8 Cyl 6.2L | 376 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 4
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 3
- Clamps Included: Yes
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 18
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 11
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2006-2010 Dodge Charger Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L, 3.5L 2006-2010 Dodge Charger with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge Charger exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Charger's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16936 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16936 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Dodge Charger | V | 2736 | 6 Cyl 2.7L | 167 |
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler (Front) Body Width: 4
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16871 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16871 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16871 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Lincoln MKX | V | 3496 | 6 Cyl 3.5L | 213 |
- Street Series Stainless Cat-Back System
- Dual Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Muffler Body Length Position Front: 14
- Exhaust Tip Quantity: 2
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.25
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 5
- Type: Cat-back
- Muffler (Front) Body Width: 4
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Muffler Body Width Position Front: 4
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 14
- Exit Style: Dual Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: Yes
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 14
- Title: Magnaflow Street Series Cat-back Performance Exhaust System 16871
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Muffler Body Height Position Front: 4
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow Street Series Cat-Back Performance Exhaust System 16871 brings out the personality of your SUV with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this SUV exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other SUV's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16871 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16871 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2009 - Lincoln MKX | V | 3496 | 6 Cyl 3.5L | 213 |
- Dual; Dual Rear Exit; Includes 3.0 in. Tubing/Super 40 Series(TM) Mufflers/Scavenger X-Pipe/4.0 in. Logo Embossed Stainless Tips;50 State Legal / California Emissions Compliant 409S Stainless Steel
- American Thunder Cat Back Exhaust System; Dual; Dual Rear Exit; Includes 3.0 in. Tubing/Super 40 Series™ Mufflers/Scavenger X-Pipe/4.0 in. Logo Embossed Stainless Tips;
- American Thunder Cat Back Exhaust System
- Product Attributes:
- Tip Quantity: 2
- Exhaust Type: Dual
- Sound Level: Moderate/aggressive
- WARNING CA Proposition 65: Yes
- Exhaust Series: American Thunder
- Heat Shield Attached: No
- Exit Style: Straight
- Muffler Series: Super 40 Series
- Exit Position: Dual Rear
- Muffler Count: 2
- System Type: Cat Back
- Muffler Part Number: Kit Only
-
Features:
- Mandrel Bent 16 Gauge 409 Stainless Tubing
- Includes Hangers And Hardware For Easy Installation
- Dyno Tuned for Maximum Performance
- Premium Flowmaster Quality
- 3 Year Limited Warranty
- Made in the USA
- For the person who is looking for a complete Cat-back dual exhaust system with an aggressive tone. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Delivers an aggressive exterior and moderate interior tone and is well suited to the enthusiast owner. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
140296, 16885, 39484, S7102409
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2009 - Dodge Challenger | V | 6059 | 8 Cyl 6.1L | SRT8 | 370 |
Showing 1 - 10 of 354 products
Loading...