Image
Product
Price
- Dual Center Rear Exit For Vehicles without Underbody Catalytic Converter
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 6
- Exhaust Tip Length: 4.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Center Rear
- Muffler Body Width: 6
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2013-2017 Hyundai Veloster Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.6L 2013-2017 Hyundai Veloster with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hyundai Veloster exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hyundai Veloster's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15215 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15215 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbocharged | 97 |
- Quad Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 4
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Quad Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 18
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2010-2016 Hyundai Genesis Coupe Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.8L 2010-2016 Hyundai Genesis Coupe with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hyundai Genesis Coupe exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hyundai Genesis Coupe's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16507 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16507 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Hyundai Genesis Coupe | V | 3778 | 6 Cyl 3.8L | 231 |
- Street Series Stainless Cat-Back System
- Quad Split Rear Exit
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Muffler Body Length Position Front: 14
- Exhaust Tip Quantity: 4
- Muffler (Rear) Body Height: 5
- Muffler (Front) Body Height: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Clamps Included: Yes
- Exhaust Tip Length: 7.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Height Position Rear: 5
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Muffler Body Length Position Rear: 18
- Exit Style: Quad Split Rear
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler (Front) Body Length: 14
- Muffler Body Material: Stainless Steel
- Muffler (Rear) Body Length: 18
- Title: Magnaflow 2010-2016 Hyundai Genesis Coupe Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Muffler Body Height Position Front: 4
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2010-2016 Hyundai Genesis Coupe Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.8L 2010-2016 Hyundai Genesis Coupe with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hyundai Genesis Coupe exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hyundai Genesis Coupe's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16507 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16507 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Hyundai Genesis Coupe | V | 3778 | 6 Cyl 3.8L | 231 |
- Street Series Stainless Cat-Back System
- Dual Center Rear Exit For Vehicles without Underbody Catalytic Converter
- Magnaflow Street Series Stainless Cat-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Folded Edge
- Exhaust Tip Quantity: 2
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 18
- Clamps Included: Yes
- Muffler Body Height: 6
- Exhaust Tip Length: 4.5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Type: Cat-back
- Series: Street
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Dual Center Rear
- Muffler Body Width: 6
- Main Piping Diameter: 2.5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow 2013-2017 Hyundai Veloster Street Series Cat-back Performance Exhaust System
- Exhaust Tip Diameter: 4
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Dyno-proven performance
- The MagnaFlow 2013-2017 Hyundai Veloster Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.6L 2013-2017 Hyundai Veloster with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Hyundai Veloster exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Hyundai Veloster's to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15215 features a cat-back layout that replaces your ride's stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15215 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbocharged | 97 |
- 2.5in. Cat-Back. Dual Rear Exit. T304
- Without Underbody Catalytic Converter
- 2.5in. Cat-Back. Dual Rear Exit. T304 Stainless Steel.
- MBRP Armor Pro 2.5 Inch Cat Back Dual Exit
- Product Attributes:
- Major: Sport Compact
- Tail Pipe Quantity: 2
- Exhaust Tip Quantity: 0
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Muffler Quantity: 1
- Muffler Body Length: 20
- Clamps Included: Yes
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Side Rear
- Muffler Body Width: 4
- Cutting Required: No
- Vehicle Profile: Race Profile
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Flow Increase (%): 28
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- MBRP Series: Armor Pro
- Pipe Material: T304 Stainless Steel
-
Features:
- Durable T304 Stainless Steel Construction. Bolt-on Installation. Improved Horsepower and Torque. Improved Throttle Response. Lowers Exhaust Gas Temperatures.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo | E | Turbocharged | 97 |
- 2.5in. Cat-Back. Dual Rear Exit. T304
- Without Underbody Catalytic Converter
- 2.5in. Cat-Back. Dual Rear Exit. T304 Stainless Steel.
- MBRP Armor Pro 2.5 Inch Cat Back Dual Exit with Polished Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Sport Compact
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 20
- Clamps Included: Yes
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 7.75
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Side Rear
- Muffler Body Width: 4
- Cutting Required: No
- Vehicle Profile: Race Profile
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Flow Increase (%): 28
- Muffler Body Material: T304 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T304 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Durable T304 Stainless Steel Construction. Easy to Clean and Maintain. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo | E | Turbocharged | 97 |
- 2.5in. Cat-Back. Dual Rear Exit. AL
- Without Underbody Catalytic Converter
- 2.5in. Cat-Back. Dual Rear Exit. Aluminized Steel.
- MBRP Armor Lite 2.5 Inch Cat Back Dual Exit with Polished Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Sport Compact
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 20
- Clamps Included: Yes
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 7.75
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Side Rear
- Muffler Body Width: 4
- Cutting Required: No
- Vehicle Profile: Race Profile
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Flow Increase (%): 28
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Lite
- Exhaust Tip Diameter: 4
- Pipe Material: Aluminized Steel
- Exhaust Tip Finish: Polished
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo | E | Turbocharged | 97 |
- 2.5in. Cat-Back. Dual Rear Exit. AL
- Without Underbody Catalytic Converter
- 2.5in. Cat-Back. Dual Rear Exit. Aluminized Steel.
- MBRP Armor Lite 2.5 Inch Cat Back Dual Exit
- Product Attributes:
- Major: Sport Compact
- Tail Pipe Quantity: 2
- Exhaust Tip Quantity: 0
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Muffler Quantity: 1
- Muffler Body Length: 20
- Clamps Included: Yes
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Side Rear
- Muffler Body Width: 4
- Cutting Required: No
- Vehicle Profile: Race Profile
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Flow Increase (%): 28
- Muffler Body Material: Aluminized Steel
- Muffler Body Shape: Round
- MBRP Series: Armor Lite
- Pipe Material: Aluminized Steel
-
Features:
- Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Bolt-on Installation. Lower Exhaust Gas Temperatures. Signature MBRP Styling and Sound.
- THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo | E | Turbocharged | 97 |
- 2.5in. Cat-Back. Dual Rear Exit. T409. CF Tips
- Without Underbody Catalytic Converter
- 2.5in. Cat-Back. Dual Rear Exit. T409 Stainless Steel with Carbon Fiber Tips.
- MBRP Armor Pro 2.5 Inch Cat Back Dual Exit with Carbon Fiber Tips
- Product Attributes:
- Exhaust Tip Wall: Dual
- Major: Sport Compact
- Tail Pipe Quantity: 2
- Exhaust Tip Edge: Straight
- Exhaust Tip Quantity: 2
- Fuel Type: Gasoline
- Minor: Dual
- Tail Pipe Outlet Outside Diameter: 2.5
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 1
- Muffler Body Length: 20
- Clamps Included: Yes
- Vehicle Segment: Car
- Tail Pipe Tapered Outlet: No
- Bolt-On Yes/No: Yes
- Muffler Body Height: 4
- Exhaust Tip Length: 6.5
- Muffler Finish: Polished
- UPS Able: Yes
- Prop 65 (C, R or CR): Cr
- Tubing Diameter: 2.5 Inch
- Exhaust Tip Cut: Angled
- Exhaust Tip Connection: Bolt-on
- Hangers Included: Yes
- Exit Style:
- Dual Rear Exit
- Dual Side Rear
- Muffler Body Width: 4
- Cutting Required: No
- Vehicle Profile: Race Profile
- Main Piping Diameter: 2.5
- Clamping Type: Round Band
- Muffler Yes/No: Yes
- Flow Increase (%): 28
- Muffler Body Material: T409 Stainless Steel
- Muffler Body Shape: Round
- Tip Shape: Round
- MBRP Series: Armor Pro
- Exhaust Tip Diameter: 4
- Pipe Material: T409 Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Rugged 16-Gauge T409 Construction. Improved Horsepower and Torque. Bolt-on Installation. Increased Throttle Response.
- THE ONLY EXHAUST YOU"LL EVER NEED - MBRP Armor Pro Series exhaust systems are backed by a Lifetime Warranty and crafted out of T304 Stainless Steel - the most durable material grade that money can buy. The T304 Stainless Steel tubing is easy to clean and maintain. It’s the obvious choice for you if you operate your vehicle in extreme conditions. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine VIN | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2013 - Hyundai Veloster | L | 1591 | 4 Cyl 1.6L | Turbo | E | Turbocharged | 97 |
Showing 1 - 9 of 9 products
Loading...