Image
Product
Price
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -06/01/1992
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1993 - Nissan D21 | L | 2389 | 4 Cyl 2.4L | - | To:06-01-92 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 07/01/1992-, with Federal Emissions
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1993 - Nissan D21 | L | 2389 | 4 Cyl 2.4L | - | Fr:07-01-92 |
- Production: -08/1993, with Blue Mark
- Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. This Standard Motor Products injector can be used to replace an OE injector with either a blue mark or a black mark.
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1993 - Nissan 300ZX | Naturally Aspirated | To:08-00-93 |
- Production: -08/1993, with Black Mark
- Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective. This Standard Motor Products injector can be used to replace an OE injector with either a blue mark or a black mark.
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1993 - Nissan 300ZX | Naturally Aspirated | To:08-00-93 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- with Seals
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Nissan NX | L | 1998 | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: -07/31/1993
- with Seals
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|
| 1993 - Nissan Sentra | L | 1998 | 4 Cyl 2.0L | 122 | To:07-31-93 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 04/1992-, with Black Mark
- Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1993 - Nissan 300ZX | Turbocharged | Fr:04-00-92 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 04/1992-, with Blue Mark
- Because of the position of these injectors in relation to the fuel rail, extreme care should be taken during installation so as not to damage the seal rings. Problems with new injectors immediately after installation are almost always due to improper installation which can ruin the seal rings. Always inspect the seal ring for damage before considering the injector itself to be defective.
Additional Fitment Information:
| Vehicle | Aspiration | Prod. Date Range |
|---|---|---|
| 1993 - Nissan 300ZX | Turbocharged | Fr:04-00-92 |
- Always replace fuel filter when injector is replaced.
- Reman Multi Port Fuel Injector
- GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Nissan Maxima | V | 2960 | VG30E | 6 Cyl 3.0L | 181 |
- Always replace fuel filter when injector is replaced.
- Reman Multi Port Fuel Injector
- GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1993 - Nissan Sentra | L | 1597 | 4 Cyl 1.6L | 97 |
Showing 1 - 10 of 15 products
Loading...