Image
Product
Price
- Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman Multi Port Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217-1941, 4612402
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Plymouth Voyager | V | 3301 | 6 Cyl 3.3L | 201 |
- Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman Multi Port Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0280150998, 217-3384, 53031151
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge B2500 | V | 3906 | 6 Cyl 3.9L | 239 |
- Fuel Injector;
- Fuel Injector
- Product Attributes:
- Fuel Rate: Oem
-
Features:
- Fuel Injector
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Jeep TJ | L | - | 6 Cyl 4.0L | Sahara | 242 |
- Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman Multi Port Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
217-1942, 4663376
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Eagle Vision | V | 3301 | 6 Cyl 3.3L | 201 |
- Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman Multi Port Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0280150837, 217-2318, 217-2328, 53030518
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | Sub Model | Engine VIN | CID |
|---|---|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | 5211 | CNG | 8 Cyl 5.2L | Laramie | T | 318 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Volkswagen EuroVan | V | 2771 | 6 Cyl 2.8L | - |
- Injector Set 45HP - Dodge 1994-1998 5.9L 12-Valve
- 12-Valve engine; Set of 6-injectors; 45 hp;
- Injector Set 45HP - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Perfromance Injector Set
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 45 Hp
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040187
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Flow-enhanced exchange fuel injectors
- Highest degree of accuracy
- Comes with boost orifice elbow fitting
- VCO Type 145-degree 5 Hole
- Replace your stock injectors with BD's flow-enhanced exchange fuel injectors with new VCO Type 145-degree 5 Hole nozzles and Highest degree of accuracy.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Injector Set 120HP - Dodge 1994-1998 5.9L 12-Valve
- 12-Valve engine; Set of 6-injectors; 120 hp;
- Injector Set 120HP - Dodge RAM 2500/3500 1994-1998 5.9L 12-Valve Engine
- Perfromance Injector Set
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 120 Hp
- Engine: 5.9l Cummins 94-98 12 Valve
- Suggested Product: 1040187
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Flow-enhanced exchange fuel injectors
- Highest degree of accuracy
- Comes with boost orifice elbow fitting
- SAC Type 145-degree 5 Hole
- Replace your stock injectors with BD's flow-enhanced exchange fuel injectors with new VCO Type 145-degree 5 Hole nozzles and Highest degree of accuracy.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
- Remanufactured Diesel Fuel Injector
- wo/California Emissions
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Retainer Clips Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Maximum Outside Diameter: 40
- Fuel Injection Type:
- Direct Injection
- Inyección Directa
- Terminal Quantity: 2
- Body Material:
- Acero
- Steel
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Inyector
- Terminal Gender:
- Macho
- Male
- Attachment Method:
- Bolt On
- Con Perno
- Connector Gender:
-
Features:
- Ideal replacement - this remanufactured hydraulic electric unit injector (HEUI) restores lost performance from a fouled original equipment injector
- Thoroughly remanufactured - this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- This hydraulic electric unit injector (HEUI) has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.
This Part Fits the Following OEM/Substitute Numbers:
1836AA, 27190, 722-501, 800-1607, DE501, F4TZ9VE527AARM, F7TZ9E527ARM, F8IZ9E527DRM, F8Z9E527DRM, FJ595
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-Super Duty | V | - | 8 Cyl 7.3L | 445 |
- Remanufactured Diesel Fuel Injector
- wo/California Emissions
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Retainer Clips Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Maximum Outside Diameter: 40
- Fuel Injection Type:
- Direct Injection
- Inyección Directa
- Terminal Quantity: 2
- Body Material:
- Acero
- Steel
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Inyector
- Terminal Gender:
- Macho
- Male
- Attachment Method:
- Bolt On
- Con Perno
- Connector Gender:
-
Features:
- Ideal replacement - this remanufactured hydraulic electric unit injector (HEUI) restores lost performance from a fouled original equipment injector
- Thoroughly remanufactured - this fuel injector has been completely disassembled, cleaned, inspected, reassembled with new internal components and tested to be leak-free
- Cost-effective solution - offers original equipment quality at competitive price
- Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
- This hydraulic electric unit injector (HEUI) has been thoroughly remanufactured using an exclusive process to ensure optimum quality and reliability. Critical components are replaced and clearances are verified after cleaning, reassembly and testing.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1997 - Ford F-59 Commercial Stripped Chassis | V | - | DIESEL | 8 Cyl 7.3L | 445 |
Showing 1 - 10 of 66 products
Loading...