Image
Product
Price
- Fuel Injector;
- Fuel Injector
- Product Attributes:
- Fuel Rate: Oem
-
Features:
- Fuel Injector
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | V | - | 8 Cyl 5.7L | ST | 345 |
- Includes fuel inlet tube o-ring. Required Replacement: fuel inlet tube, use P/N 522-043. Always replace fuel filter when injector is replaced.
- Reman Diesel Fuel Injector
-
Features:
- Includes 100% new nozzle to ensure precise fuel delivery under all operating parameters
- Includes copper combustion seal
- Includes fuel inlet tube o-ring
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
- GB premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated automated flow bench under multiple operating parameters to meet or exceed OE specifications.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0445120050, 0445120185, 0445120193, 0986435518, 68027067AA, 68027067AB, 68069384AA, R8069384AA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | Extended Crew Cab Pickup | 408 |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | SLT | Extended Crew Cab Pickup | 408 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Includes O-Ring Seals
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | 8 Cyl 4.7L | 287 |
- BD-Built 6.7L Cummins Injector Stock Reman (0986435518) Dodge/RAM 2007.5-2012
- Individual injector;
- BD-Built 6.7L Cummins Injector Stock Reman (0986435518) Dodge/RAM 2007.5-2012 2500/3500
- Replacement Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050106
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built Performance 6.7L Cummins CR Injector Dodge 2007.5-2018 Stage 2 43%/90hp
- Stage 2; 90 hp Increase;
- BD-Built Performance 6.7L Cummins CR Injector Dodge 2007.5-2018 - Stage 2 - 43% / 90hp
- Performance Injector
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 43% (90hp)
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050071
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 43% over - approximately 90hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-53%, which equates to approximately 60hp-120hp.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Injectors + Install Dodge/Ram 6.7L Cummins 2007.5-2012
- Injectors + Install Dodge/RAM 6.7L Cummins 2007.5-2012 2500/3500/4500/5500
- Injector Set with Install Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050106
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Manufactured by Bosch trained technician
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench
- Over 8 operating conditions tested
- Includes BD's OEM fit fuel lines
- High quality gaskets
- All in one kit for doing an injector install on a 6.7L Cummins engine. Includes BD-Built stock replacement injectors (6), injector lines (6), and Bosch fuel injector supply tubes (6). Injectors are OE quality, assembled using OE procedures, and fully calibrated/tested to ensure perfect operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built 6.7L Cummins StockPlus Injector (0986435518) Dodge 2007.5-2012
- Exchange;
- BD-Built 6.7L Cummins StockPlus Injector (0986435518) Dodge/RAM 2007.5-2012 2500/3500
- Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stockplus 5-15 Hp
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050340-wsp
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- BD-Built StockPlus injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. StockPlus injectors increase horsepower by between 5%-15%.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built Performance 6.7L Cummins CR Injector Dodge 2007.5-18 Stage 3 53%/120hp
- Stage 3; 120 hp Increase;
- BD-Built Performance 6.7L Cummins CR Injector Dodge 2007.5-2018 - Stage 6 - 53% / 120hp
- Performance Injector
- Product Attributes:
- Category: Performance Injectors & Nozzles
- Power Level: 53% (120hp)
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050157
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- Precision Calibrated to a flow tolerance of +/-2% versus the OEM at +/-5%
- OE quality nozzles are extrude honed
- 53% over - approximately 120hp
- BD-Built Performance injectors are assembled using OE procedures and fully calibrated and tested to ensure perfect operation. Performance injectors increase fuel quantity between 33%-53%, which equates to approximately 60hp-120hp.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- BD-Built 6.7L Cummins Injector Reman (0986435574) Dodge/RAM 2010.5-2012 Cab/Chas
- Cab and Chassis w/SCR (Selective Catalytic Reduction) or Urea Blue Filler Cap Tank; Bosch equivalent 0986435574;
- BD-Built 6.7L Cummins Injector Stock Reman (0986435574) Dodge/RAM 2010.5-2012 Cab & Chassis w/SCR
- Stock Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Engine: 6.7l Cummins 07.5-12
- Suggested Product: 1050333
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 18 products
Loading...