Image
Product
Price
- Fuel Injector;
- Fuel Injector
- Product Attributes:
- Fuel Rate: Oem
-
Features:
- Fuel Injector
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2013 - Chrysler 300 | V | - | 8 Cyl 5.7L | S | 345 |
- Cylinders 1,2,7,8 | Includes fuel injector high pressure fuel line and hold-down bolt. Always replace fuel filter when injector is replaced.
- Reman Diesel Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes fuel injector high pressure fuel line
- Includes injector hold-down bolt
- Includes copper combustion seal
- Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
- GB premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0445117023, 0445117024, 0986435415, BC3Z9H529A, BC3Z9H529C, BC3Z9H529E
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ford F-350 Super Duty | V | 6651 | 8 Cyl 6.7L | 406 |
- with PZEV emissions | Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman GDI Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12633789, 217-3444
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Buick LaCrosse | L | 2384 | 4 Cyl 2.4L | 145 |
- Recommend replacement of fuel filter when injector is replaced (where applicable).
- Reman Multi Port Fuel Injector
-
Features:
- Each unit is 100% tested to OE specifications
- Includes new o-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
- The GB line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
16450R5AA01
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2013 - Honda CR-V | EX |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Direct Injection
- with EU5 Fuel Injectors and with Bosch High-Pressure Fuel Pump
- IMPORTANT: Per BMW Service Bulletin S1 B13 03 15 the injectors in the vehicle may not match what is listed in the BMW ETK. Identify the injector installed in the vehicle using ISTA / D 4.04 or later test plan using the following path: Vehicle Management - Service Functions - Powertrain - Engine Electronics - Injector Determination. Test Plan will state "This engine requires EU# Injectors" - Also Required: (1) 13 53 7 577 649 Decoupling Element
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - BMW X6 | L | 2979 | 6 Cyl 3.0L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Direct Injection
- with EU5 Fuel Injectors
- IMPORTANT: Per BMW Service Bulletin S1 B13 03 15 the injectors in the vehicle may not match what is listed in the BMW ETK. Identify the injector installed in the vehicle using ISTA / D 4.04 or later test plan using the following path: Vehicle Management - Service Functions - Powertrain - Engine Electronics - Injector Determination. Test Plan will state "This engine requires EU# Injectors" - Also Required: (1) 13 53 7 577 649 Decoupling Element
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - BMW X1 | L | 1997 | 4 Cyl 2.0L | 122 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Incl.O-Rings,Retainers and Seals
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Chevrolet Equinox | V | 3564 | 6 Cyl 3.6L | 217 |
- Injector - Chevy 6.6L Duramax 2011-2016 LML Stock Replacement
- Individual injector; LML;
- Injector - Chevy/GMC 6.6L Duramax 2011-2016 LML Stock Replacement
- Replacement Injector
- Product Attributes:
- Category: Stock Injectors
- Engine: Duramax 6.6l 11-16 Lml-lgh
- Suggested Product: 1045830
- Make: Chevy/gm
- Prop 65 (C, R or CR): Cr
-
Features:
- Bosch Individual exchange injectors
- Bosch's Remanufactured Diesel Injectors are produced at the same Bosch facility as the new diesel injectors. All wearable parts and critical components are replaced with genuine Bosch parts, and the latest original equipment production technology is used. Bosch remanufactured injectors include all OE updates, so they can often be superior to the OE injectors that they replace.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - GMC Sierra 2500 HD | V | 6599 | 8 Cyl 6.6L | 403 |
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018
- BD-Built 6.7L Cummins Injector Stock Reman (0986435621) Dodge/RAM 2013-2018 Pick-up
- Performance Injector
- Product Attributes:
- Premium Option: Standard
- Category: Stock Injectors
- Power Level: Stock
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1057932
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench. Over 8 operating conditions tested.
- Manufactured by Bosch trained technician
- BD-Built Stock replacement injectors are OE quality, assembled using OE procedures, and fully calibrated and tested to ensure perfect operation.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
- Injectors + Install Dodge/Ram 6.7L Cummins C&C 2013-2018
- Cab and Chassis; Bosch equivalent 0986435573;
- Injectors + Install Dodge/Ram 6.7L Cummins Cab & Chassis 2013-2018
- Injector Set with Install Kit
- Product Attributes:
- Category: Parts & Accessories
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1050106
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Manufactured by Bosch trained technician
- Every injector receives a new Bosch nozzle and control valve.
- All injectors tested and validated on a Bosch 815 test bench
- Over 8 operating conditions tested
- Includes BD's OEM fit fuel lines
- High quality gaskets
- All in one kit for doing an injector install on a 6.7L Cummins engine. Includes BD-Built stock replacement injectors (6), injector lines (6), and Bosch fuel injector supply tubes (6). Injectors are OE quality, assembled using OE procedures, and fully calibrated/tested to ensure perfect operation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 144 products
Loading...