1997 Ignition Coil Parts
Image
Product
Price
- Ignition Coil;
- Ignition Coil
-
Features:
- Ignition Coil
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Jeep Grand Cherokee |
- Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;CARB E.O. D-40-37 0.68 ohms Primary Resistance/4.8k ohms Secondary Resistance~GM Dual Connector Coil Use PN[8876] Harness For Direct Plug-in
- GM Dual Connection Ignition Coil; Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;
- GM Dual Connection Ignition Coil
- Product Attributes:
- Spark Duration: 300 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- Inductance: 5.6 Mh
- Maximum Voltage: 44000
- Peak Current: 220 Ma
- Primary Resistance: .680 Ohms
- Secondary Resistance: 4.8k Ohms
-
Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, install an MSD Ignition Control with a PN 8876 Harness for a direct plug-in installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet C3500 | V | - | 8 Cyl 5.7L | 350 |
- Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;CARB E.O. D-40-37 GM Dual Connector Coil Use PN[8876] Harness For Direct Plug-in~0.68 ohms Primary Resistance/4.8k ohms Secondary Resistance
- GM Dual Connection Ignition Coil; Direct Replacement; 5.6 mH Inductance; 44000 Max Voltage; 220 ma Peak Current; 300 uS Spark Duration; 100:1 Turns Ratio; Red; Single;
- GM Dual Connection Ignition Coil
- Product Attributes:
- Spark Duration: 300 Us
- WARNING CA Proposition 65: Yes
- Turns Ratio: 100:1
- Inductance: 5.6 Mh
- Maximum Voltage: 44000
- Peak Current: 220 Ma
- Primary Resistance: .680 Ohms
- Secondary Resistance: 4.8k Ohms
-
Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory-style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. The MSD Blaster GM Coil is designed to produce increased voltage and energy over the stock GM Coil. To get even more ignition performance, install an MSD Ignition Control with a PN 8876 Harness for a direct plug-in installation.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Chevrolet C3500 | V | - | 8 Cyl 5.7L | 350 |
- Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;CARB E.O. D-40-37
- Blaster Ignition Coil; Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;
- Blaster Ignition Coil
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- Inductance: 3.9 Mh
- Peak Current: N/a
- Secondary Resistance: 13.7k Ohms
-
Features:
- Direct performance replacement for late model Dodge vehicles
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Bolt-on more output voltage to your late model Chrysler/Dodge ignition. The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring with an MSD Ignition, use the Universal Harness, PN 8873.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | - | 8 Cyl 5.9L | LT | 360 |
- Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;CARB E.O. D-40-37
- Blaster Ignition Coil; Direct Performance Replacement; 2 Pin; 3.9 mH Inductance; 13.7 ohms Secondary Resistance; 70:1 Turns Ratio; Red;
- Blaster Ignition Coil
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 70:1
- Inductance: 3.9 Mh
- Peak Current: N/a
- Secondary Resistance: 13.7k Ohms
-
Features:
- Direct performance replacement for late model Dodge vehicles
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- Bolt-on more output voltage to your late model Chrysler/Dodge ignition. The MSD Blaster Dodge Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD Ignition Control. To ease the wiring with an MSD Ignition, use the Universal Harness, PN 8873.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | 5211 | 8 Cyl 5.2L | ST | 318 |
- 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;CARB E.O. D-40-37
- Ignition Coil; 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;
- Ignition Coil
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Turns Ratio: 77:1
- Inductance: 7 Mh
- Maximum Voltage: 36000
- Primary Resistance: .510 Ohms
- Secondary Resistance: 12k Ohms
-
Features:
- Performance replacement for Mitsubishi 2.0L 1996 to early 1999
- Performance replacement for Dodge 2.0L from mid 1997 to 2002
- 77:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- Flat terminal connection only
- CARB E.O. Approved
- MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep. This MSD Blaster Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS-2 Ignition Control, PN 62112. There are two types of 4-tower coils used on the Eclipse, Neon, Talon, and other vehicles. The MSD Coil, PN 8239 has flat terminal pins, if you require a coil with round terminal pins, an Adapter can be ordered from Mopar Dealers as PN M04897087AA, or call the MSD Customer Service line at (915) 855-7123, ask for Adapter, ASY30160.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Avenger | L | 1996 | 4 Cyl 2.0L | 122 |
- 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;CARB E.O. D-40-37
- Ignition Coil; 4-Tower; Bolt-On; 7 mH Inductance; 36000 Max Voltage; 0.51 ohms Primary/12k ohms Secondary Resistance; 77:1 Turns Ratio; Red;
- Ignition Coil
- Product Attributes:
- WARNING CA Proposition 65: Yes
- Turns Ratio: 77:1
- Inductance: 7 Mh
- Maximum Voltage: 36000
- Primary Resistance: .510 Ohms
- Secondary Resistance: 12k Ohms
-
Features:
- Performance replacement for Mitsubishi 2.0L 1996 to early 1999
- Performance replacement for Dodge 2.0L from mid 1997 to 2002
- 77:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- Flat terminal connection only
- CARB E.O. Approved
- MSD offers these 4-tower coils as higher performance replacements for a variety of years ranging from 1994-2003 on vehicles from Dodge/Plymouth/Chrysler/Mitsubishi/Eagle/Jeep. This MSD Blaster Coil is designed as a replacement coil and produces a high voltage spark. To get even more ignition performance, install an MSD DIS-2 Ignition Control, PN 62112. There are two types of 4-tower coils used on the Eclipse, Neon, Talon, and other vehicles. The MSD Coil, PN 8239 has flat terminal pins, if you require a coil with round terminal pins, an Adapter can be ordered from Mopar Dealers as PN M04897087AA, or call the MSD Customer Service line at (915) 855-7123, ask for Adapter, ASY30160.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Stratus | L | 1996 | 4 Cyl 2.0L | 122 |
- 4-Tower; Bolt-On; 3.9 mH Inductance; 40000 Max Voltage; 0.53 ohms Primary/13.7k ohms Secondary Resistance; 83:1 Turns Ratio; Red;CARB E.O. D-40-37
- Ford DIS Coil Pack; 4-Tower; Bolt-On; 3.9 mH Inductance; 40000 Max Voltage; 0.53 ohms Primary/13.7k ohms Secondary Resistance; 83:1 Turns Ratio; Red;
- Ford DIS Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 83:1
- Inductance: 3.9 Mh
- Maximum Voltage: 40000
- Peak Current: N/a
- Primary Resistance: .530 Ohms
- Secondary Resistance: 13.7k Ohms
-
Features:
- Designed to use w/late model Ford waste spark ignition systems
- 83:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Secondary towers designed for snap on spark plug terminals
- Primary terminals require Ford style connector
- CARB E.O. Approved
- This MSD Ford4-Tower Coil is designed as a replacement coil and produces a high-voltage spark. To get even more ignition performance, install an MSD DIS Series Ignition Control. Note: If the Coil Pack is being installed on a 99-04 Ford Focus Zetec, the spark plug wires will require replacement. MSD offers a set under Part Number 32939.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Ford Explorer | V | - | 8 Cyl 5.0L | Eddie Bauer | 302 |
- 4-Tower; Bolt-On; 3.9 mH Inductance; 40000 Max Voltage; 0.53 ohms Primary/13.7k ohms Secondary Resistance; 83:1 Turns Ratio; Red;CARB E.O. D-40-37
- Ford DIS Coil Pack; 4-Tower; Bolt-On; 3.9 mH Inductance; 40000 Max Voltage; 0.53 ohms Primary/13.7k ohms Secondary Resistance; 83:1 Turns Ratio; Red;
- Ford DIS Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 83:1
- Inductance: 3.9 Mh
- Maximum Voltage: 40000
- Peak Current: N/a
- Primary Resistance: .530 Ohms
- Secondary Resistance: 13.7k Ohms
-
Features:
- Designed to use w/late model Ford waste spark ignition systems
- 83:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Secondary towers designed for snap on spark plug terminals
- Primary terminals require Ford style connector
- CARB E.O. Approved
- This MSD Ford4-Tower Coil is designed as a replacement coil and produces a high-voltage spark. To get even more ignition performance, install an MSD DIS Series Ignition Control. Note: If the Coil Pack is being installed on a 99-04 Ford Focus Zetec, the spark plug wires will require replacement. MSD offers a set under Part Number 32939.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Ford Mustang | V | - | 8 Cyl 4.6L | GT | 281 |
- Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;CARB E.O. D-40-37
- Coil Pack; Direct Replacement; 4.2 mH Inductance; 0.35 ohms Primary/7.8k ohms Secondary Resistance; 80:1 Turns Ratio; Red;
- Coil Pack
- Product Attributes:
- Spark Duration: N/a
- WARNING CA Proposition 65: Yes
- Turns Ratio: 80:1
- Inductance: 4.2 Mh
- Peak Current: N/a
- Primary Resistance: .350 Ohms
- Secondary Resistance: 7.8k Ohms
-
Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
- MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Buick LeSabre |
Showing 1 - 10 of 334 products
Loading...