2000 Chevrolet Radiator Coolant Hose Parts


Showing 1 - 10 of 62 products
Image
SKU
Product
Rating
Price

Dayco
  • Curved Radiator Hose
  • Product Attributes:
    • : 1.31
    • Trunk Height: 11 3/4
    • Color: Black
    • Contains Heat Shield: N
    • Centerline Length: 11.75
    • End 1 Inside Diameter:
      • 1 5/16
      • 1.31
    • Hose Type: Single I.d. Hose
    • SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
    • Contains Protective Sleeve: N
    • Material: Epdm
    • End 2 Inside Diameter: 1 5/16

This Part Fits the Following OEM/Substitute Numbers:
22369M, 22524, 22647232, 62443, 9157, D71980

Additional Fitment Information:
Vehicle Position
2000 - Chevrolet Malibu Lower

Dayco
  • Curved Radiator Hose
  • Product Attributes:
    • : 1.31
    • Trunk Height: 11
    • End 3 Inside Diameter: 3/4
    • Hose Type: Branched Hose
    • End 2 Inside Diameter: 1 5/16
    • Color: Black
    • Axis 1 Length: 13
    • Contains Heat Shield: N
    • Centerline Length: 11
    • End 1 Inside Diameter:
      • 1 5/16
      • 1.31
    • SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
    • Contains Protective Sleeve: N
    • Material: Epdm

This Part Fits the Following OEM/Substitute Numbers:
1250, 22343, 22640552, 22671575, 22679467, 24376L, 62277, 8976, D71944

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2000 - Chevrolet Cavalier L 2190 Lower 4 Cyl 2.2L 134

Dayco
  • Curved Radiator Hose
  • Product Attributes:
    • : 1.31
    • Trunk Height: 12 1/2
    • Color: Black
    • Contains Heat Shield: N
    • Centerline Length: 12.50
    • End 1 Inside Diameter:
      • 1 5/16
      • 1.31
    • Hose Type: Single I.d. Hose
    • SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
    • Contains Protective Sleeve: N
    • Material: Epdm
    • End 2 Inside Diameter: 1 5/16

This Part Fits the Following OEM/Substitute Numbers:
1195, 21226, 22137M, 22342, 22595552, 22595553, 22618825, 22656323, 26345X, 62236, 7937, 8975, D71943

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2000 - Chevrolet Cavalier L 2190 Upper 4 Cyl 2.2L 134

Dayco
  • 15,000 GVW
  • Curved Radiator Hose
  • Product Attributes:
    • : 1.50
    • Trunk Height: 16 1/2
    • Color: Black
    • Contains Heat Shield: N
    • Centerline Length: 16.50
    • End 1 Inside Diameter:
      • 1 1/2
      • 1.75
    • Hose Type: Dual I.d. Hose
    • SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
    • Contains Protective Sleeve: N
    • Material: Epdm
    • End 2 Inside Diameter: 1 3/4

This Part Fits the Following OEM/Substitute Numbers:
036, 064, 10001775, 15005693, 15072792, 20687, 24034L, 3231929, 328988, 345348, 360647, 3733157, 3970122, 410669, 415451, 467417, 497533, 551137...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2000 - Chevrolet K3500 V - Lower 8 Cyl 7.4L 454

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 18
      • 457
    • End 1 Inside Diameter:
      • 1.52
      • 39
    • Material: Epdm, Plastic
    • Modular: No
    • End 2 Inside Diameter:
      • 1.52
      • 39
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
15031305, 15037656, 15710112, 15769077, 15792826, 15907960, 19130015, 22437, 22742967, 22827735, 22861887, 24403L, 25891043, 62261, 71990, 9070, C2437, E71990...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Silverado 1500 V 5328 Lower GAS 8 Cyl 5.3L 325

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 13.7
      • 348
    • End 1 Inside Diameter:
      • 1.3
      • 33
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.3
      • 33
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
22369M, 22524, 22647232, 62443, 71980, 9157, C2524, D71980

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Malibu V - Lower GAS 6 Cyl 3.1L 189

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length: 394
    • End 1 Inside Diameter:
      • 1.25
      • 32
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.25
      • 32
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
10284401, 10347833, 10410467, 22345, 22661206, 24377L, 62549, 71950, 72039, 8978, D71950, D72039

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Monte Carlo V - Lower GAS 6 Cyl 3.4L 207

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 216
      • 8.5
    • End 1 Inside Diameter:
      • 1.27
      • 32
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.27
      • 32
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
10403194, 20795743, 215013NT0D, 215013TA0A, 21501JA000, 21501JA100, 21501JA800, 22353, 26348X, 62914, 62915, 66303, 66653, 66654, 8986, A91427, B90295, B90747...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Camaro V - Upper - Radiator To Power Steering Cooler GAS 8 Cyl 5.7L 350

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 1214
      • 47.8
    • End 1 Inside Diameter:
      • 1.27
      • 32
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.27
      • 32
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
10379176, 15041305, 15045504, 15057981, 15076028, 15078028, 15179498, 22436, 26390X, 62262, 62634, 71989, 9069, C2436, D92675, E71989

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Suburban 2500 V 5967 Upper GAS 8 Cyl 6.0L 364

Gates
  • Molded Coolant Hose
  • Product Attributes:
    • Branch Quantity: 0
    • Contains Spring: No
    • Molded: Yes
    • Centerline Length:
      • 21.2
      • 538
    • End 1 Inside Diameter:
      • 1.25
      • 32
    • Material: Epdm
    • Modular: No
    • End 2 Inside Diameter:
      • 1.25
      • 32
    • Quick Connect Fitting Quantity: 0
  • Features:
    • Specifically-engineered materials resist collapse under vacuum
    • Engineered to resist electrochemical degradation, the leading cause of hose failure
    • Pre-shaped to fit and to ensure perfectly sealed conditions
    • EPDM tube
    • synthetic fiber knit reinforcement
    • heat-, ozone- and chemical coolant-resistant EPDM cover
    • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
    • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
    • Caution: Do not use for fuel or oil transfer applications
  • Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.

This Part Fits the Following OEM/Substitute Numbers:
10285951, 10401339, 10401999, 10421339, 22344, 26346X, 8977, C2344, F11072, PCH114840

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
2000 - Chevrolet Impala V - Upper GAS 6 Cyl 3.4L 207
Showing 1 - 10 of 62 products

Loading...