Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.2
- 488
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710A020, 165710A040, 1657120020, 1657120030, 1657120060, 1657120080, 1657120081, 16571AA010, 22309, 24367L, 62420, 62520, 71797, 72150, 8942, E71797, E72150
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Toyota Sienna | V | 2995 | Upper | GAS | 6 Cyl 3.0L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.1
- 384
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
021920, 046, 09844243, 0A0880, 100899, 101337, 11531711321, 1303X00, 134MFT1, 1365619, 14-1642-4, 142-5775, 142-5930, 1433180, 155613A, 15562826, 1616812, 1616813...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Toyota Tundra | V | 4663 | Upper | GAS | 8 Cyl 4.7L | 285 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.1
- 384
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Toyota Land Cruiser | V | 4663 | Upper | GAS | 8 Cyl 4.7L | 285 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Toyota Tundra | V | 4663 | Upper | 8 Cyl 4.7L | 285 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Toyota Camry | V | 2995 | Upper | 6 Cyl 3.0L | - |
- Cut to Fit
- Curved Radiator Hose
- Product Attributes:
- : 1.19
- Trunk Height: 17
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 17
- End 1 Inside Diameter:
- 1 3/16
- 1.19
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 1 3/16
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Toyota MR2 Spyder | Lower - Pipe To Pipe |
- Curved Radiator Hose
- Product Attributes:
- : 1.19
- Trunk Height: 17
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 17
- End 1 Inside Diameter:
- 1 3/16
- 1.19
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 1 3/16
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2000 - Toyota Solara | L | 2164 | Lower | 4 Cyl 2.2L | - |
- Cut to Fit
- Curved Radiator Hose
- Product Attributes:
- : 1.19
- Trunk Height: 17
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 17
- End 1 Inside Diameter:
- 1 3/16
- 1.19
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 1 3/16
This Part Fits the Following OEM/Substitute Numbers:
16572-03031, 16572-03070, 16572-74180, 16572-74290, 16573-22010, 16574-22010, 21964, 22271, 24277L, 24357L, 62452, 8654, 8904, D71679
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2000 - Toyota MR2 Spyder | Upper - Pipe To Pipe |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Toyota Tacoma | V | 3378 | Lower | GAS | 6 Cyl 3.4L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-2129-2, 1657107030, 1657162070, 1657207030, 1657207040, 1657262070, 1657262090, 1785152D00, 191121101F, 21534, 22198M, 54-06115, 560, 61647, 62430, 62727, 66032, 66033...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2000 - Toyota Tacoma | V | 3378 | Upper | GAS | 6 Cyl 3.4L | - |
Showing 1 - 10 of 61 products
Loading...