Image
Product
Price
- Reuse OEM Connector w/o Quick Connect Cut to Fit
- Curved Radiator Hose
- Product Attributes:
- : 1.31
- Trunk Height: 11 3/4
- Color: Black
- Contains Heat Shield: N
- Centerline Length: 11.75
- End 1 Inside Diameter:
- 1 5/16
- 1.31
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r4 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- Material: Epdm
- End 2 Inside Diameter: 1 5/16
This Part Fits the Following OEM/Substitute Numbers:
22369M, 22524, 22647232, 62443, 9157, D71980
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine Designation | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Volkswagen Jetta | L | 1896 | Automatic | Upper - Pipe To Radiator | ALH | 4 Cyl 1.9L | 116 |
- W/O Quick Connect Fitting; Cut to fit; Not exact duplicate
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Volkswagen Golf | L | 1781 | Automatic | Upper - Tee-1 To Tee-2 | GAS | 4 Cyl 1.8L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2004 - Volkswagen Jetta | V | 2771 | Upper - Radiator To Tee | GAS | 6 Cyl 2.8L | - |
- W/Aux. W.P.; Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2004 - Volkswagen Jetta | L | 1781 | Automatic | Upper - Tee-1 To Tee-2 | GAS | 4 Cyl 1.8L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- Radiator to Expansion Tank and Adapter
- Lower
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Volkswagen Passat | L | 1967 | Lower | 4 Cyl 2.0L | 120 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- Upper
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Volkswagen Golf | L | 1781 | Upper | 4 Cyl 1.8L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- Thermostat to Radiator -Models in Warm Countries/Regions w/Temp Sender Orifice in Hose
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Volkswagen Passat | V | 2771 | Lower | 6 Cyl 2.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2004 - Volkswagen Jetta | L | 1781 | Upper | 4 Cyl 1.8L | GLI | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2004 - Volkswagen Golf | L | 1781 | Lower | 4 Cyl 1.8L | - |
- W/O Quick Connect Fitting; Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
14-2129-2, 1657107030, 1657162070, 1657207030, 1657207040, 1657262070, 1657262090, 1785152D00, 191121101F, 21534, 22198M, 54-06115, 560, 61647, 62430, 62727, 66032, 66033...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine Designation | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|---|
| 2004 - Volkswagen Golf | L | 1896 | Automatic | Upper - Radiator To Tee-1 | ALH | DIESEL | 4 Cyl 1.9L | 116 |
Showing 1 - 10 of 34 products
Loading...