2005 Audi Radiator Coolant Hose Parts
Choose a Model for your 2005 Audi
Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Audi TT Quattro | V | 3189 | Upper - Radiator To Tee | GAS | 6 Cyl 3.2L | 195 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Audi TT Quattro | V | 3189 | Lower - Tee-1 To Tee-2 | GAS | 6 Cyl 3.2L | 195 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Audi A4 | L | 1984 | Upper | 4 Cyl 2.0L | 121 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Audi A6 Quattro | V | 3123 | Upper | 6 Cyl 3.2L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
- w/Quick Connect Coupler
- Upper
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Audi A4 Quattro | L | 1781 | Upper | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Audi A6 Quattro | V | 3123 | Lower | 6 Cyl 3.2L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Audi A4 Quattro | L | 1781 | Lower | 4 Cyl 1.8L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Chassis Range | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Audi A4 | V | 2976 | Upper | up to 125000 | 6 Cyl 3.0L | - |
- Molded
- Chas: -125000, Radiator to Pipe and Expansion Tank
- Upper
Additional Fitment Information:
| Vehicle | Block | CC | Position | Chassis Range | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Audi A4 Quattro | V | 2976 | Upper | up to 125000 | 6 Cyl 3.0L | - |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Chassis Range | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Audi A4 | V | 2976 | Upper | 125001 and up | 6 Cyl 3.0L | - |
Showing 1 - 10 of 38 products
Loading...