2005 Ford Radiator Coolant Hose Parts
Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .75
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18.81
- 19
- 478
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
22366M, 22505, 62199, 62289, 71936, 9138, D71936, F7DE 8286 DA, F7DE 8286 EA, F7DE 8286 HA, F7DZ 8286 DA, JF1Z 8286 A, KM-3261, KM-4516, XF12 8B273 AA, XF1Z 8286 AA
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Taurus | V | 2986 | Lower | OHV | GAS | 6 Cyl 3.0L | 182 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 15.6
- 396
- End 1 Inside Diameter:
- 1.48
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.48
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1L2Z 8286 BA, 22478M, 22793, 62344, 71957, 9428, F10109
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Explorer | V | - | Lower | FLEX | 6 Cyl 4.0L | Limited | 245 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 213
- 8.4
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20376S, 22448, 2S7Z 8A567 AA, 2S7Z 8A567 AD, 4F22 8261 AA, 62732, 71728, 71984, 72385, 9081, B71728, B71984, B72385, F5RZ 8A567 A, GY0115536, KH337, KM-4392, XF22 8291 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Freestar | V | - | Lower | GAS | 6 Cyl 4.2L | 256 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30.3
- 770
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22863, 26474X, 4L34 8B274 DC, 4L3Z 8260 DA, 62903, 66009, 72248, 7L3Z 8260 A, 9498, E72248, KM 4917, KM-4739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford F-350 | V | - | Upper | GAS | 8 Cyl 5.4L | 330 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 17.5
- 445
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22474M, 22779, 3C34 8B274 A, 3C34 8B274 AF, 3C3Z 8260 AC, 3C3Z 8260 AG, 62733, 72256, 9414, C2779, E72256, KM-4696, KM4783
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford F-250 Super Duty | V | - | Upper | DIESEL | 8 Cyl 6.0L | 363 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 236
- 9.3
- End 1 Inside Diameter:
- 1.51
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.51
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1F1Z 8286 AB, 1F1Z 8B273 AB, 20399S, 22811, 66140, 72168, 9446, C72168, KM-4547
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Taurus | V | 2968 | Lower | DOHC | GAS | 6 Cyl 3.0L | 181 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 22.8
- 579
- End 1 Inside Diameter:
- 1.47
- 37
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.47
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22242, 24346L, 62138, 71840, 8882, C2242, E71840, F6DE 8B274 DB, F6DZ 8260 A, KM-3026
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Taurus | V | 2986 | Upper | OHV | GAS | 6 Cyl 3.0L | 182 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 23.7
- 602
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22859, 26471X, 4L3Z 8286 BC, 62904, 72419, 9494, E72419, KM4738
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford F-350 | V | - | Lower | GAS | 8 Cyl 5.4L | 330 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 19.21
- 488
- End 1 Inside Diameter:
- 1.45
- 37
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.45
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
1L24 8B274 BC, 1L2Z 8260 BA, 22691, 24481L, 62343, 72517, 9324, E72517, KM-4545
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Explorer | V | - | Upper | FLEX | 6 Cyl 4.0L | XLS | 245 |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: 1.51
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 20.5
- 38
- 521
- End 1 Inside Diameter: .3
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.23
- 31
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
23089, 24547L, 3F13 8A520 BB, 3F1Z 8A520 BA, 3F1Z8A520BA, 66457, 72336, 9754, E72336, R16349
Additional Fitment Information:
| Vehicle | Block | CC | Position | Cylinder Head Type | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Ford Taurus | V | 2968 | Upper | DOHC | GAS | 6 Cyl 3.0L | 181 |
Showing 1 - 10 of 59 products
Loading...