Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 30.3
- 770
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22863, 26474X, 4L34 8B274 DC, 4L3Z 8260 DA, 62903, 66009, 72248, 7L3Z 8260 A, 9498, E72248, KM 4917, KM-4739
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | Upper | GAS | 8 Cyl 5.4L | 330 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 23.7
- 602
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
22859, 26471X, 4L3Z 8286 BC, 62904, 72419, 9494, E72419, KM4738
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Lincoln Mark LT | V | - | Lower | GAS | 8 Cyl 5.4L | 330 |
- Radiator Coolant Hose
- Product Attributes:
- Grade Type: Regular
- Contains Spring:
- No
- Non
- Maximum Bend Angle: 80
- Componentes modulares incluidos: No
- Angle: 80
- Bending Radius: 4
- Protective Sleeve Attached:
- No
- Non
- End 2 Inside Diameter: 1.5
- Quick Connect Fitting Quantity: 0
- Branch Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Black
- Negro
- Noir
- Modular Components Included:
- No
- Non
- Construction:
- Ensamble Moldeado
- Molded Assembly
- Axis 1 Length: 16
- Molded:
- Oui
- Sí
- Yes
- Centerline Length: 16
- Contenidos del paquete: 1 Manguera De Refrigerante Del Radiador
- End 1 Inside Diameter: 1.44
- Maximum Working Pressure: 100
- Arm Length: 16
- Hose Shape:
- Ensamble Moldeado
- Molded Assembly
- Material:
- Caucho
- Élastomère
- Rubber
- Modular:
- No
- Non
-
Features:
- Upgraded material - this replacement radiator coolant hose features an aluminum connector for added durability over the plastic factory design
- Application specific - designed to match the original fit and function of the factory coolant hose on certain vehicle years, makes and models
- Complete replacement - hose comes with necessary clamps for easy installation
- Quality engineering - designed in the United States and backed by more than a century of automotive aftermarket experience
- Original equipment radiator coolant hoses often fail due to cracks in the plastic connectors. This Dorman OE FIX replacement features an upgraded aluminum connector to help prevent similar failures in the future and provide greater reliability.
This Part Fits the Following OEM/Substitute Numbers:
24023, 3W4Z8260BC
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Lincoln LS | V | - | Upper | 8 Cyl 3.9L | 242 |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Mark LT | Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Mark LT | Lower |
- Molded
- w/o Oil Cooler;with Un-Detachable Rubber Cooling Hose (Long)
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Town Car | Lower |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Molded
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Zephyr | Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Mark LT | Lower |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Zephyr | Upper |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Lincoln Town Car | Upper |
Showing 1 - 10 of 11 products
Loading...