Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.3
- 363
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
165710H100, 165710V060, 1657128240, 1657136050, 22578M, 23178, 66197, 66332, 72418, 9839, C91439, D72418
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2009 - Toyota Camry | L | 2362 | Upper | GAS | 4 Cyl 2.4L | - |
- Molded Coolant Hose
- Product Attributes:
- End 3 Inside Diameter: .30
- Branch Quantity: 1
- Modular Components Included: Branch
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 24.6
- 625
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.45
- 37
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
16037, 1605736010, 16571-0V020, 165710V020, 1657128250, 23299, 26585X, 626-674, 66210, 66212, 72496, E72496, R44102
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2009 - Toyota RAV4 | L | 2494 | Upper | GAS | 4 Cyl 2.5L | 152 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.3
- 363
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.3
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2009 - Toyota Venza | L | 2672 | Upper | GAS | 4 Cyl 2.7L | 163 |
- Engine Heater Hose Assembly
- Built in U.S.A.
- Product Attributes:
- Grade Type: Regular
- Contains Spring:
- No
- Non
- Maximum Bend Angle: 90
- Angle:
- 49 Deg
- 49 Grados
- End 2 Inside Diameter: 25
- Color:
- Black
- Negro
- Noir
- Branch Quantity: 2
- Molded:
- Oui
- Sí
- Yes
- Maximum Working Pressure: 75
- Hose Shape:
- Ensamble Moldeado
- Molded Assembly
- Material:
- Epdm
- Metal
- Plastic
- Plástico
- Modular:
- No
- Non
- End 3 Inside Diameter: 37
- Componentes modulares incluidos: No
- Bending Radius: 3
- Protective Sleeve Attached:
- Oui
- Sí
- Yes
- Quick Connect Fitting Quantity: 0
- Modular Components Included:
- No
- Non
- Construction:
- Ensamble Moldeado
- Molded Assembly
- Axis 1 Length: 680
- Centerline Length: 3627.86
- Contenidos del paquete: 1 Ensamble De Manguera Del Calentador
- End 1 Inside Diameter: 40
- Axis 2 Length: 1247.49
- Arm Length: 947
-
Features:
- Upgraded material - this replacement engine heater hose assembly features aluminum Y-connectors for added durability
- Application specific - designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement - hoses come with necessary clamps for easy installation
- Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience
- Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic Y-connector. This Dorman OE FIX replacement features an upgraded aluminum Y-connector to prevent similar failures in the future.
This Part Fits the Following OEM/Substitute Numbers:
165710V020, 23299, 66210, 72496
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota RAV4 | L | 2494 | Left | 4 Cyl 2.5L | 152 |
- Molded
- Production: -03/31/2009, Inlet
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|---|
| 2009 - Toyota Sequoia | V | 4663 | Upper | 8 Cyl 4.7L | 285 | To:03-31-09 |
- Molded
- Production: 08/01/2008-, JAPAN MADE MODELS
Inlet - Outlet
- Upper
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|---|
| 2009 - Toyota RAV4 | L | 2494 | Upper | 4 Cyl 2.5L | 152 | Fr:08-01-08 |
- Molded
- Production: 11/01/2008-, North American Made Models
- Outlet
- Upper
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|---|
| 2009 - Toyota RAV4 | L | 2494 | Upper | 4 Cyl 2.5L | 152 | Fr:11-01-08 |
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Tundra | V | 3956 | Upper | 6 Cyl 4.0L | 241 |
- Molded
- Production: -07/31/2009, Inlet
- Inlet
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID | Prod. Date Range |
|---|---|---|---|---|---|---|
| 2009 - Toyota 4Runner | V | 4663 | Upper | 8 Cyl 4.7L | 285 | To:07-31-09 |
- Molded
- North American Made Models
- Outlet
- Lower
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Corolla | L | 1798 | Lower | 4 Cyl 1.8L | 110 |
Showing 1 - 10 of 77 products
Loading...