Image
Product
Price
- Molded Coolant Hose
- Product Attributes:
- Modular Components Included: Female Quick Connector
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 37
- 940
- End 1 Inside Diameter:
- 1.3
- 33
- Material: Epdm, Plastic
- Modular: Yes
- End 2 Inside Diameter:
- 1.55
- 39
- Quick Connect Fitting Quantity: 1
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube
- synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
- Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
- Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates is the Automotive Aftermarket leader in the unique modular assembly coolant hose segment. Gates Modular Coolant Hose is manufactured to fit specific applications and are similar to OEM specifications to include specific essential integrated OE components such as hose branches, quick-connectors, sensors, restrictors, etc.
This Part Fits the Following OEM/Substitute Numbers:
25414D3500, 51831, F11309, R40194
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Hyundai Tucson | L | 1999 | Upper | GAS | 4 Cyl 2.0L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.5
- 368
- End 1 Inside Diameter:
- 1.31
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.31
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Jeep Wrangler | L | 1997 | Lower - Radiator To Tee | PLUG-IN HYBRID EV-GAS (PHEV) | 4 Cyl 2.0L | 122 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.5
- 368
- End 1 Inside Diameter:
- 1.31
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.31
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Jeep Wrangler | V | 3604 | Lower - Pipe To Radiator | GAS | 6 Cyl 3.6L | 220 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.5
- 368
- End 1 Inside Diameter:
- 1.31
- 33
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.31
- 33
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
52413, 68310710AA, F12036
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Jeep Wrangler | V | 3604 | Lower - Tee To Radiator | MILD HYBRID EV-GAS (MHEV) | 6 Cyl 3.6L | 220 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 20.875
- 530
- End 1 Inside Diameter:
- 1.34
- 34
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.57
- 40
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
52411, 68282209AC, F12035
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|---|
| 2021 - Jeep Gladiator | V | 3604 | Manual | Upper | GAS | 6 Cyl 3.6L | 220 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 215
- 8.48
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
17127617368, 51572, F11543
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2021 - BMW X2 | L | 1998 | Lower | GAS | 4 Cyl 2.0L | xDrive28i | 122 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 18
- 457
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm, Plastic
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
16196, 23460, 24647L, 45161AG000, 45161AG00A, 45161AG00B, 45161AG070, 45161AJ00A, 45161AJ060, 45161AJ210, 45161AL070, 45161SC010, 66319, 66637, 66638, 72484, C3460, C91617...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Subaru WRX STI | H | 2458 | Upper | GAS | 4 Cyl 2.5L | - |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.7
- 297
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
16195, 20514S, 23459, 45161AG010, 45161AG01A, 66428, 72485, B91457, C72485, R40123
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2021 - Subaru WRX STI | H | 2458 | Lower | GAS | 4 Cyl 2.5L | - |
- Lower Radiator Hose
- Product Attributes:
- End 3 Inside Diameter: 0.72
- Contains Spring:
- No
- Non
- Maximum Bend Angle: 90
- Componentes modulares incluidos: T
- Angle: 90
- Bending Radius: 1.5
- Protective Sleeve Attached:
- No
- Non
- End 2 Inside Diameter: 1.78
- Quick Connect Fitting Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Branch Quantity: 2
- Color:
- Black
- Negro
- Noir
- Modular Components Included: Tee
- Construction:
- Ensamble Moldeado
- Molded Assembly
- Axis 1 Length: 25.5
- Molded:
- Oui
- Sí
- Yes
- Centerline Length: 26.75
- Contenidos del paquete: 1 Manguera De Refrigerante Del Radiador
- End 1 Inside Diameter: 1.25
- Arm Length: 25.5
- Axis 2 Length: 1.25
- Hose Shape:
- Ensamble Moldeado
- Molded Assembly
- Material:
- Caucho
- Élastomère
- Rubber
- Modular:
- No
- Non
-
Features:
- Upgraded materials - this Dorman OE FIX replacement radiator coolant hose features an aluminum connector for added durability compared to the factory hose assembly
- Application specific - made to directly replace the radiator coolant hose on specific vehicle years, makes and models for seamless fit and function
- Durable design - built to resist corrosion and coolant leaks for reliable performance
- Trustworthy quality - backed by a team of engineers and product experts in the United States and more than a century of automotive experience
- Radiator coolant hoses often fail and leak because of brittle plastic connectors. This Dorman OE FIX replacement hose features an aluminum connector to increase durability and reduce the potential of future leaks.
This Part Fits the Following OEM/Substitute Numbers:
24796, 52014849AB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ram ProMaster 1500 | V | 3604 | Lower | 6 Cyl 3.6L | 220 |
- Radiator Coolant Hose
- Product Attributes:
- Contains Spring:
- No
- Non
- Maximum Bend Angle: 90
- Componentes modulares incluidos: Conexión Rápida Hembra
- Angle: 90
- Protective Sleeve Attached:
- Oui
- Sí
- Yes
- End 2 Inside Diameter: 2.3
- Quick Connect Fitting Quantity: 2
- Branch Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Color:
- Black
- Negro
- Noir
- Modular Components Included: Female Quick Connect
- Axis 1 Length: 28.5
- Molded:
- Oui
- Sí
- Yes
- Working Pressure: 100
- Centerline Length: 28.5
- Contenidos del paquete: 1 Conjunto De Manguera De Refrigerante Del Radiador
- End 1 Inside Diameter: 2.3
- Maximum Working Pressure: 20
- Hose Shape:
- Ensamble Moldeado
- Molded Assembly
- Material:
- Epdm
- Metal
- Plastic
- Plástico
- Modular:
- Oui
- Sí
- Yes
- Contains Spring:
-
Features:
- Direct replacement - this radiator coolant hose is designed to match the fit and function of the original hose on specified vehicles
- Restores functionality - reliable replacement for an original hose that has failed due to heat and fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This radiator coolant hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
51810, HC3Z8260C, HC3Z8260D, HC3Z8260E
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2021 - Ford F-250 Super Duty | V | 6651 | Upper | 8 Cyl 6.7L | 406 |
Showing 1 - 10 of 116 products
Loading...