Image
Product
Price
- Performance Aluminum Radiator, fits 2008-2014 Subaru WRX / 2008-2021 STI
- Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Increased Fluid Capacity And Optimal Heat Dissipation
- SellingPoint05: Provides Efficient Temperature Reduction For Use On The Street, Track, Rallycross, Or Autocross Course
- SellingPoint06: Includes 1.3 Bar High-pressure Radiator Cap Which Effectively Raises The Boiling Point Of Engine Coolant, Providing A Safer And More Efficient System
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 2008-2019 Subaru Wrx/sti
- SellingPoint02: Full Aluminum Construction Including Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): 28
- SellingPoint03: Features A Two-row, 1.65-in Thick, Efficient Brazed Aluminum Core
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 13.39
- TechSpec Core Thickness (in): 1.65
- Installation Difficulty: 3
- SellingPoint10: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.15
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 27.08
- TechSpec Overall Height (in): 21.8
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): 2.21
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto 2008-2014 Subaru WRX/STI radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Subaru WRX STI | H | 2458 | GAS | 4 Cyl 2.5L | - |
- Performance Aluminum Radiator, fits 2008-2014 Subaru WRX / 2008-2021 STI
- Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Increased Fluid Capacity And Optimal Heat Dissipation
- SellingPoint05: Provides Efficient Temperature Reduction For Use On The Street, Track, Rallycross, Or Autocross Course
- SellingPoint06: Includes 1.3 Bar High-pressure Radiator Cap Which Effectively Raises The Boiling Point Of Engine Coolant, Providing A Safer And More Efficient System
- SellingPoint07: Includes Magnetic Drain Plug To Capture Any Metallic Debris/fragments In Your Cooling System
- SellingPoint01: Direct Fit For The 2008-2019 Subaru Wrx/sti
- SellingPoint02: Full Aluminum Construction Including Durable, Tig-welded End Tanks
- TechSpec Overall Length (in): 28
- SellingPoint03: Features A Two-row, 1.65-in Thick, Efficient Brazed Aluminum Core
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 13.39
- TechSpec Core Thickness (in): 1.65
- SellingPoint10: N/a
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.15
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 27.08
- TechSpec Overall Height (in): 21.8
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 2
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): 2.21
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed and engineered to maximize cooling efficiency by up to 30-percent, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto 2008-2014 Subaru WRX/STI radiator features a lightweight dual core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Subaru WRX STI | Sport |
- 08-14 Subaru WRX & STI with built-in Oil Cooler All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5625 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: Yes
- Outlet Diameter: 1.5625 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: Yes
- Core Width: 27 In.
- Down Flow Or Cross Flow Type: Down Flow
- Core Thickness: 1.625 In.
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Center
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 13.375 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Left
- Finish/Color: Polished
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined "Quick-Connect" Inlet/Outlet Connections
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- All-Aluminum Race Style Drain Plug
- 1-Hour "Mirror Finish" Hand Polish
- Drop-in Fit
- The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Subaru Crosstrek | United States | Premium |
- 08-14 Subaru WRX / STI / 15-21 Subaru WRX 1-Row 31mm High-Performance Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5625 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.5625 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 1
- Radiator Cap Included: Yes
- Core Width: 27.0625 In.
- Down Flow Or Cross Flow Type: Down Flow
- Core Thickness: 1.25 In.
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Center
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 13.4375 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Right
- Finish/Color: Polished
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- High-Performance Core Features CSF's Exclusive B-Tube Technology
- Supersedes CSF #7028
- Core Featured Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- 100% All-Aluminum TIG-Welded Construction
- CNC Machined Mounting Brackets
- Innovative "Multi-Fit" Combo Pipe and Plug Design, Included
- True "Drop-in Fit" Requires No Modifications to Install
- Individually Leak and Pressure Tested
- 1 Hour "Mirror Finish" Hand Polish
- For Manual Transmission Only
- The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Subaru Crosstrek | United States | Limited |
- 08-14 Subaru WRX / STI / 15-21 Subaru WRX 2-Row 42mm Race-Spec Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5625 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.5625 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: Yes
- Core Width: 27.0625 In.
- Down Flow Or Cross Flow Type: Down Flow
- Core Thickness: 1.625 In.
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Center
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 13.375 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Left
- Finish/Color: Polished
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- High-Performance Core Features CSF's Exclusive B-Tube Technology
- Supersedes CSF #7042
- Core Featured Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- 100% All-Aluminum TIG-Welded Construction
- CNC Machined Mounting Brackets
- Innovative "Multi-Fit" Combo Pipe and Plug Design, Included
- True "Drop-in Fit" Requires No Modifications to Install
- Individually Leak and Pressure Tested
- 1 Hour "Mirror Finish" Hand Polish
- For Manual Transmission Only
- The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2017 - Subaru Crosstrek | United States | Premium |
- 6th Gen Subaru Outback/Legacy High-Performance All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your Outback/Legacy. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.5625 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.5625 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: Yes
- Core Width: 27 In.
- Down Flow Or Cross Flow Type: Down Flow
- Core Thickness: 42mm
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Center
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 13.75 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Right
- Finish/Color: Satin
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row - 42mm Ultra-High-Performance Core
- Cooling Tubes with CSF's Exclusive B-Tube Technology
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined Mounting Brackets and OEM Style Inlet/Outlet
- 100% All Aluminum TIG-Welded Construction
- Smooth Satin Finish
- True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
- Individually Leak and Pressure Tested
- 2-Year Limited Warranty
- The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.
This Part Fits the Following OEM/Substitute Numbers:
45111AL03A, 45111AL04A
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|---|---|
| 2017 - Subaru Outback | H | 2498 | FB25 | United States | 4 Cyl 2.5L | 2.5i Limited | Wagon | 152 |
- 2nd Gen Crosstrek / 5th Gen Impreza High-Performance All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your Crosstrek/Impreza. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.3125 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.3125 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: Yes
- Core Width: 14.625 In.
- Down Flow Or Cross Flow Type: Cross Flow
- Core Thickness: 42mm
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Right
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 26 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Left
- Finish/Color: Satin
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row - 42mm Ultra-High-Performance Core
- Cooling Tubes with CSF's Exclusive B-Tube Technology
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined Mounting Brackets and OEM Style Inlet/Outlet
- 100% All Aluminum TIG-Welded Construction
- Smooth Satin Finish
- True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
- Individually Leak and Pressure Tested
- 2-Year Limited Warranty
- The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.
This Part Fits the Following OEM/Substitute Numbers:
45111FL001, 45111FL00B
Additional Fitment Information:
| Vehicle | Block | CC | Engine Designation | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Subaru Impreza | H | 1995 | FB20 | Canada | 4 Cyl 2.0L | Convenience | - |
- 2nd Gen Crosstrek / 5th Gen Impreza High-Performance All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your Crosstrek/Impreza. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Inlet Connector Type: Slip On
- Thermostat Included: No
- Grade Type: Performance
- Inlet Diameter: 1.3125 In.
- Mounting Hardware Included: No
- Frame Included: No
- Tank Material: Aluminum
- Internal Engine Oil Cooler: No
- Outlet Diameter: 1.3125 In.
- Coolant Hose Outlet Connection Type: Oe Type Connection
- Core Row Quantity: 2
- Radiator Cap Included: Yes
- Core Width: 14.625 In.
- Down Flow Or Cross Flow Type: Cross Flow
- Core Thickness: 42mm
- Installation Type: Drop-in Fit Installation
- Inlet Location: Top Right
- Core Material: Aluminum
- Coolant Hose Inlet Connection Type: Oe Type Connection
- Core Height: 26 In.
- Mounting Type: Mounts With Oe Hardware
- Outlet Location: Bottom Left
- Finish/Color: Satin
- Internal Transmission Oil Cooler: No
- Outlet Connector Type: Slip On
-
Features:
- 2-Row - 42mm Ultra-High-Performance Core
- Cooling Tubes with CSF's Exclusive B-Tube Technology
- 6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined Mounting Brackets and OEM Style Inlet/Outlet
- 100% All Aluminum TIG-Welded Construction
- Smooth Satin Finish
- True Plug-and-Play "Drop-in Fit" Installation Requires Absolutely No Modifications
- Individually Leak and Pressure Tested
- 2-Year Limited Warranty
- The 42mm 2-Row aluminum core not only increases the fluid capacity of the radiator, but also improves the cores ability to dissipate heat. CSF's Exclusive B-Tube Technology improves heat transfer by approximately 15% over regular oval welded tubes. In addition, the super-efficient multi-louvered fins maximize airflow through the core for the best possible performance. Efficiency is key in off-roading as speeds tend to be lower overall so you end up relying on the fans to move most of the air over the radiator. While the factory fans do a decent job pulling air through the radiator core, it is still less airflow than you'd typically see in city driving. A larger and more efficient core will keep your engine temps in check and keep your engine running strong. Also, a larger core also helps when your radiator is covered in dust, dirt, or mud. While a radiator isn't functioning at peak efficiency in there situations, the more overall cooling capacity you have the better. In Addition, the end tanks are made from high grade aluminum and TIG welded to the core for extra strength. In contrast, the OEM crimped onto plastic end tank design is much weaker and creates a weak point where failure is more likely. Because the CSF radiator is designed as a true plug-and-play drop-in fit application, installation requires absolutely no modifications, trimming, or cutting.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Subaru Impreza | H | 1995 | Center | Canada | 4 Cyl 2.0L | Touring | - |
- X-Line Performance Aluminum Radiator, fits 08-14 Subaru WRX / 08-21 STI
- X-Line Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Greater Density Of Rows For Higher Cooling Capacity.
- SellingPoint05: More Contact Points For Additional Heat Transfer.
- SellingPoint06: 3-row Design Creates More Air Turbulence, Maximizing Cooling Efficiency
- SellingPoint07: Includes Magnetic Drain Plug
- SellingPoint01: Direct Fit For The 2008-2014 Subaru Wrx/sti
- SellingPoint02: Premium Radiator Has 3-row (2-in Thick) Core For Improved Strength And Reliability.
- TechSpec Overall Length (in): 21.8
- SellingPoint03: 16-percent Thinner-than-stock Tubes Allow For More Surface Contact, Increasing Cooling Efficiency.
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Includes A High-pressure 1.3 Bar
- SellingPoint09: Mishimoto Radiator Cap
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 27.09
- TechSpec Core Thickness (in): 2
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: This Item Is For Manual Transmission Vehicles. For Automatic Applications, Please Purchase Optional Mishimoto Universal Transmission Cooler Kit.----caution:--the Provided Mishimoto Radiator Cap Should Replace The Stock Cap Located On The Expansion Tank. T
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.5
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 13.39
- TechSpec Overall Height (in): 28
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): N/a
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/2008-2021 Subaru STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto X Line performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed with a larger 3 row core to maximize cooling efficiency, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto aluminum 2008-2014 Subaru WRX/STI radiator features a lightweight triple core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2017 - Subaru WRX STI | H | 2458 | GAS | 4 Cyl 2.5L | - |
- X-Line Performance Aluminum Radiator, fits 08-14 Subaru WRX / 08-21 STI
- X-Line Performance Aluminum Radiator, fits Subaru WRX 2008-2014/Subaru STI 2008-2021
- Product Attributes:
- SellingPoint04: Greater Density Of Rows For Higher Cooling Capacity.
- SellingPoint05: More Contact Points For Additional Heat Transfer.
- SellingPoint06: 3-row Design Creates More Air Turbulence, Maximizing Cooling Efficiency
- SellingPoint07: Includes Magnetic Drain Plug
- SellingPoint01: Direct Fit For The 2008-2014 Subaru Wrx/sti
- SellingPoint02: Premium Radiator Has 3-row (2-in Thick) Core For Improved Strength And Reliability.
- TechSpec Overall Length (in): 21.8
- SellingPoint03: 16-percent Thinner-than-stock Tubes Allow For More Surface Contact, Increasing Cooling Efficiency.
- TechSpec Chassis Codes: Ge--gh
- SellingPoint08: Includes A High-pressure 1.3 Bar
- SellingPoint09: Mishimoto Radiator Cap
- TechSpec Drain Plug Thread Size: M12 X 1.5
- TechSpec Core Height (in): 27.09
- TechSpec Core Thickness (in): 2
- SellingPoint10: Mishimoto Lifetime Warranty
- TechSpec Note: This Item Is For Manual Transmission Vehicles. For Automatic Applications, Please Purchase Optional Mishimoto Universal Transmission Cooler Kit.----caution:--the Provided Mishimoto Radiator Cap Should Replace The Stock Cap Located On The Expansion Tank. T
- SellingPoint15: N/a
- Install Difficulty: 3
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Ej255--ej257
- TechSpec Overall Width (ins): 2.5
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 13.39
- TechSpec Overall Height (in): 28
- TechSpec Material: N/a
- TechSpec Applications: 2008-2014 Subaru Wrx--2008-2019 Subaru Sti--2009-2013 Subaru Forester Xt--2005-2009 Subaru Outback Xt--2005-2009 Subaru Legacy Gt
- TechSpec Includes: Mishimoto Radiator--mishimoto Radiator Cap--overflow Nipples - 2--magnetic Drain Plug--mishimoto Lifetime Warranty
- TechSpec Rows: 3
- TechSpec DPI: 13091/13093
- TechSpec Fluid Capacity (gal): N/a
- TechSpec Inlet (in): 1.54
- TechSpec Outlet (in): 1.54
-
Features:
- Direct fit for the 2008-2014 Subaru WRX/2008-2021 Subaru STI
- Premium radiator has 3-row (2" thick) core for improved strength and reliability.
- 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
- Greater density of rows for higher cooling capacity.
- More contact points for additional heat transfer.
- 3-row design creates more air turbulence, maximizing cooling efficiency
- Includes magnetic drain plug
- Includes a high-pressure 1.3 bar
- Mishimoto radiator cap
- Mishimoto Lifetime Warranty
- The Mishimoto X Line performance aluminum radiator for the 2008-2014 Subaru WRX/STI is designed with a larger 3 row core to maximize cooling efficiency, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto aluminum 2008-2014 Subaru WRX/STI radiator features a lightweight triple core, 100-percent brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct OEM fit making installation effortless with no cutting or modification required. All Mishimoto radiators come with a high pressure 1.3 bar Mishimoto radiator cap and a great warranty including accident protection.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - Subaru WRX STI | Limited |
Showing 1 - 10 of 24 products
Loading...