Image
Product
Price
- 1984-1985 Toyota 4Runner 4wd (w/3in. Rear suspension lift)-Rear SX8000 Nitro Gas
- Recomm. For Use w/3.5 in. Stock Blks; Veh. w/2 in. Stock Blocks May Req.Add Lift In Of Veh.; Includes Multi-Fit Hdwr. Pk.; 2 Req.;w/2 - 3 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Jeep Wrangler | Rear | 70th Anniversary |
- 2014-2018 Dodge Ram 2500 4wd (w/3in. to 5in. suspension lift kit)-SX8000 Front N
- New Shocks Optional Leveling Kit Will Install w/o New Shocks; Includes Multi-Fit Hardware Pack; 2 Required;w/3 - 4 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Jeep Wrangler | Front | Sahara |
- 2011-2019 Chevy Silverado 2500HD 4x4 (w/0in. to 5in. Rear suspension lift)-Rear
- 2 Required;w/4 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Jeep Wrangler | Rear | Sahara |
- 1984-1985 Toyota 4Runner 4wd (w/3.5in. to 4in. suspension lift)-Front SX8000 Nit
- Recomm. For Use w/3.5 in. Rear Stock Blks; Veh. w/2 in. Stock Rear Blocks May Req.Add Lift In Rear Of Veh.; Includes Multi-Fit Hrdwr. Pk.; 2 Req.;w/2 in. Lift;
- Tuff Country EZ-Ride s SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
- SX8000 Shock Absorber
- Product Attributes:
- Collapsed Length: Oem
- Upper Mount Type: N/a
- Shock Stroke: Oem
- WARNING CA Proposition 65: Yes
- Extended Length: Oem
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
-
Features:
- Ideal For Lifted Full Size Trucks And SUVs
- Nitro Gas Charged To Limit Fading
- Polyurethane Bushings
- Twin Tube Construction
- Limited Lifetime Warranty
- 5/8 in. Piston Rod
- Quicker Shock Response
- Shock Boots Sold Separately
- Tuff Country EZ-Ride's SX8000 Nitro Gas shock absorbers are recommended for all full-size applications. The nitrogen gas pressure reduces fading and gives quicker shock response.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2011 - Jeep Wrangler | Front | Unlimited 70th Anniversary |
- with 4.5" Suspension Lift
- 2007-2018 JK 4.5" LIFT REAR 2.0 VS INTERNAL RESERVOIR SHOCK
- 07-18 JK 4.5" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Barpin
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 4.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Rear |
- Used with 2" to 3" Lift
- 2007-218 JK 2-3" LIFT FRONT 2.0 VS NON RESERVOIR SHOCK
- 07-18 JK 2-3" FRONT 2.0 VS NR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- 100% revalveable
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Front |
- Used with 2" to 3" Lift
- 2007-2018 JK 2-3" LIFT REAR 2.0 VS INTERNAL RESERVOIR SHOCK
- 07-18 JK 2-3" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Fully Open Length: 25.55
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Barpin
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 3
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consid er the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Rear |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Rear |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Compass | Rear |
- with 4.5" Suspension Lift
- 2007-2018 JK 4.5" LIFT FRONT 2.0 VS INTERNAL RESERVOIR SHOCK
- 07-18 JK 4.5" FRONT 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: No
- Cylinder Finish: Anodized
- Upper Mount Type: Stem
- Configuration: Performance
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Dust Boot Included: No
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: Yes
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Suspension Type: Spring
- Material:
- Aluminum
- Steel
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Internal Construction Type: Single Tube
- Cylinder Material: Aluminum
- California Prop 65 Warning: Yes
- Boot Included: No
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 4.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Jeep Wrangler | Front |
Showing 1 - 10 of 10 products
Loading...