Image
Product
Price
- Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 260-1724, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI, 5105041AA, 5105041AB, 5105041AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 43 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Bolt; 1 Nut; 1 Snap Ring; 1 Zerk Fitting
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Greaseable: Yes
- Cotter Pin Hole: No
- Dust Boot Material: Rubber
- Attachment Type: Pinch Bolt
- Adjustable: No
- Stud Thread Diameter: 12
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Metal
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1015003, 610.63006, FA2222, GK7449, JBJ982, K7449, MK7449, MR554376, SK7449, TC2906
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Eclipse | Front Lower |
- Suspension Ball Joint
- Product Attributes:
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 3 Hex Nuts; 3 Bolts; 3 Lock Washers; 1 Zerk Fitting
- Mounting Hole Quantity: 3
- Castle Nut Included: Yes
- Greaseable: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Metal
- Mounting Type: Bolt On
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-4316, 45D0079, 610.46008, FA2062, GK9753, JBJ687, K-9753, K9753, MB860829, MK9753, SK9753, TC831
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Montero Sport | Front Upper |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Montero | Front Upper |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Montero | Front Lower |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Rear - Upper
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Mitsubishi Montero | Rear Upper |
- TQ offers premium suspension parts at reasonable pricing and have been the reference accross North America for over 40 years.
- Top Quality Improved Design
-
Features:
- TQ powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TQ engineered steel composition results in a stronger component. Our full-ball metal stud provides smooth, consistent, rotational movement resulting in more responsive steering
- TQ greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 12180029, 2601724, 505-1417, 531-232, BJ81495, BJ96145, JBJ894, K500063, MS25511, TK500063
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | FWD |
- TOR offers the most comprehensible suspension parts on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
- TOR Improved Design
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the ball joint
- TOR engineered steel composition (40cr+) results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- An enlarged ball joint receptacle in the control arm can cause a loose ball joint fit. TOR exclusive design includes an oversized housing for a more secure fit
- Dust boot is re-installed and permanently attached to reduce contaminants, and increase durability and service life
- Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances
- TOR greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 12180029, 2601724, 505-1417, 531-232, BJ81495, BJ96145, JBJ894, K500063, MS25511, TK500063
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2005 - Mitsubishi Lancer | Front Lower | FWD |
Showing 1 - 10 of 13 products
Loading...