Image
Product
Price
- Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Xterra | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10480647, 260-1734, 45D2423, 46D2423A, 505-1426, 505-1426B, 531-348, 54500-7S001, 54500-ZR00A, 545009CD0A, 54500EA000, 54500EA00A, 54501-7S001, 54501-ZR00A, 54501EA00A, 54501ES00A, 610.42017, 61142017...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Frontier | Front Lower |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 43 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Hex Nut
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 18
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Polymer
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1016005, 10480591, 401602S601, 45D2323, 610.42014, FA2235, GK80591, JBJ923, K80591, MK80591, SB-4832, SK80591, TC1789
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Nissan NP300 | Front Lower | 4WD |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 46.3 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Polymer
- Mounting Type: Taper
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1016010, 40110EA000, 610.42027, FA2305, GK80660, JBJ334, K80660, MK80660, TC5549
Additional Fitment Information:
| Vehicle | Position | Region |
|---|---|---|
| 2011 - Nissan Frontier | Front Upper | Canada |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 39.3 Mm
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: No
- Bearing Material: Polymer
- Mounting Type: Press
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
40160-50Y00, 4016050Y00, 45D2194, 610.42006, FA2082, GK9449, JBJ181, K9449, MK9449, SB-4742, SK9449, TC1858
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Tsuru | Front Lower |
- Suspension Ball Joint
- Product Attributes:
- Housing Press Fit Diameter: 41.2 Mm
- Mounting Hardware Included: No
- Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Retaining Ring; 1 Zerk Fitting; 1 Cotter Pin
- Castle Nut Included: Yes
- Greaseable: Yes
- Cotter Pin Hole: Yes
- Dust Boot Material: Rubber
- Attachment Type: Taper
- Adjustable: No
- Stud Thread Diameter: 14
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Metal
- Mounting Type: Pressed
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1016006, 545257S000, 610.42021, FA2376E, GK80994, JBJ970, K80994, MK80994, TC5039
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Titan | Front Upper |
- Ball Joint
- Design Allows Easier Installation
- MOOG K500223 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Maximum Outside Diameter: 1.690
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
19317748, 19317873, 2601872, 45D1543, 46D1543A, 5051543, 545009AM1A, 54500ET000, 54501ET000, 610.42042, BJ69205, FA2506, MS30503, MS30514
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Juke | Front Lower |
- Ball Joint
- MOOG K500223 Ball Joint
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Maximum Outside Diameter: 1.690
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Cube | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K500129 Ball Joint
- Product Attributes:
- Adjustable: Yes
- Maximum Outside Diameter: 1.920
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
260-1609, 2601755, 45D1442, 45D2332, 46D1442A, 505-1332, 5051442, 531-299, 531-503, 545004BA0A, 54500CK000, 545014CU0A, 54501CK000, 610.42041, BJ69225, FA2250, FA2394, K500129...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Rogue | Front Lower |
- Ball Joint
- MOOG K500129 Ball Joint
- Product Attributes:
- Adjustable: Yes
- Maximum Outside Diameter: 1.920
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Rogue | Front Lower |
Showing 1 - 10 of 28 products
Loading...